Likes
Comments
Share
@Hashy
Follow
1st week has been OK. Not really much to report on. This plant is where I would expect it to be at this stage. Fan controller set so max temp should be 26deg and max humidity 80% Day 1 did nothing Day 2 did nothing Day 3 did nothing Day 4 rigged up autofeed system and watered this weeks nutes. Day 5 autofeed this weeks nutes. Day 6 did nothing, 107ppfd 6.9 dli Day 7 increased mars ts1000 power. 163ppfd 10.5dli. Back in a week. Take it easy.
Likes
3
Share
Die Pandora legt allmählich an Dichte zu und die Buds werden immer kompakter. Im Schnitt performed die Pflanze etwas besser als die Skywalker OG Auto. Es sieht auch so aus als würde die Pflanze etwas mehr Gewicht entwickeln. Dafür benötigt sie insgesamt länger als ihre Kollegin.
Likes
36
Share
@Mazgoth
Follow
It’s growing really well,I like a lot the cycle she made,a lot of photos are day by day captured
Likes
13
Share
Day 38 and it is very fast as this baby has developed, it responded very well to the LST which gave it a more resistant structure with which it will support thicker flowers, it begins to fill with resin with a pleasant citrus / sweet smell. In the next week I will start giving you an overdrive to promote fattening in all the flowers
Likes
6
Share
Likes
2
Share
nutrients are the same as in the weeks before and dont change as mutch. she is very fast if this holds up so good this is my first hydro and f1 at the same time so pretty glad all works so well.
Likes
3
Share
- 3.5 gals in bucket - Splitting nutes in half (0.95 micro, 2.5 bloom, 1.5 calmag, 1 hydro) and feeding every 3-4 days so it gets full nutes over a 7-8 day period - 356 ppm for half nutes - started noticing browning on leaves
Likes
14
Share
Okay so I'm trying something new, since I've gone away from a switch to water for the last week flush I harvested the tops and best smalls and packed the cannatrol full. I'm giving the under growth a bit more time to rippen before I harvest that for the the freezer. If this turns out to be a bad idea I'll not do it again in the future. The last long video is what's left in the tent right now. Let me know if any of you have experience doing this. Updated with a bunch of pictured of dried and cured. Ended up with 186g of beautiful flower. 72g of untrimmed smalls I'll make into RSO, I have a lot of back and nerve pain and RSO hands down the only thing that brings me actual relive, I'm late to the party on this one but I set a side part of the grow for it now. I let the under canopy and shorter tops go another 10 days feed at half strength and I'm glad I did, it ripened up nicely and definitely got a lot of color. I forgot to get pictures of that harvest but I will when I pull it from the freezer to wash. My test jar of this washed at 4+% (the last picture). Last update will be results of that wash. Last update on this one, I added a couple hash/rosin pics at the end. She washed from plant to rosin at 4.03% the terps are musky skunk, sweet pastries, and fresh Linen. I'd definitely grow this one again.
Likes
92
Share
🌸 Week 4 Flower Report: Growth, Challenges & Big Changes! 🌸 Hey, Grow Diaries Fam! ✨ We’re here at Week 4 of Flower, and what a week it’s been—packed with challenges, adjustments, and exciting progress! Before diving into the details, let’s start with a note on my flowering timeline. While this is Week 4, I don’t start counting flower days the moment I flip to 12/12. Instead, I wait for the plants to show true signs of bloom. It’s a small but significant distinction that keeps things accurate and aligned with the plants’ development. 🌱 Defoliation: Timing is Everything! Defoliation is a critical part of the flowering stage, and I typically wait until Day 21. However, this week, I tackled it earlier on Day 17 because: 1️⃣ The room was simply too full. 2️⃣ And most importantly—the Papaya Zoap had other plans! She’s a fighter—determined, defiant, and constantly reaching for the moon. Despite intense training like super cropping, she’s still pushing upward, nearly outpacing the LED lights. Challenges like this remind us of a simple truth: gardening mirrors life. It’s about resilience, adaptation, and unwavering determination. 💪 This week, I added a second SCROG layer. While this net will support the flowering colas, it’s also there to strategically manage the Papaya Zoap. Why? Because experience has taught me that if she grows out of the LED’s range, she won’t finish properly—and that could disrupt the balance for every other plant in the tent. It’s all about teamwork, even in the garden. 🌟 Defoliation was intense, removing nearly all the leaves with stems to clear space and boost airflow. The tent now looks dramatically different! For the full before-and-after transformation, be sure to check out my YouTube channel—trust me, you’ll want to see this process up close! 🎥✨ Switching to Aptus Holland Minerals A major milestone this week: I’ve transitioned entirely to Aptus Holland Minerals. 🌊 From now on, it’s just minerals—no more organic inputs. This marks the start of a new chapter, and I’m incredibly curious to see how the plants react to these changes. Here’s the current nutrient mix: • System Clean: 0.5 ml/L • Regulator: 0.15 ml/L • RO Water Conditioner: 0.8 ml/L • All-in-One Liquid: 2.1 ml/L I’m keeping the pH at 6.1 and TDS at 556 ppm, and so far, the plants are thriving. This week also included a thorough system clean, ensuring everything runs smoothly as we enter the final flowering stages. 🌿 Bud Development: Pure Magic! The bud formation across all the genetics is nothing short of incredible. Every plant is thriving, and the canopy is lush, vibrant, and full of potential. I’ve raised the PPFD to 750 for this stage, with temps steady at 25°C and RH at 63%—keeping the VPD dialed in at 1.11. The TrolMaster ecosystem, paired with the AutoPots, makes managing these precise conditions seamless. With more time to focus on the plants, I can give them the daily care they deserve. 💚 Shoutouts & Gratitude A huge thank you to my sponsors and supporters: TrolMaster, Aptus Holland, Pro-Mix, Cannakan, and the amazing seed banks. Your incredible products and technology make this journey possible. 🌟 To the Grow Diaries community and all my followers—thank you for your energy, love, and even the challenges from the haters. It all fuels this incredible process, and I apprecilove every bit of it. Special shoutout to Brother Daggadna—check him out on Instagram and show some love! 💚 The plants are heading into the next phase of bloom, and I can’t wait to share how this story unfolds. 🌸✨ As always, stay tuned, stay positive, and let’s keep growing strong together! 🙌 Growers’ love to all 💚 #TrolMaster #AptusHolland #GrowLife #CannabisCommunity #FlowerWeek4 #NeverGiveUp #GrowWithLove #IndoorHorticulture #Defoliation #PPFD #ControlledEnvironment #SCROGNet #DogDoctorOfficial Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚 P.S. – A Deep Dive into the ICL-300: Revolutionizing Under-Canopy Lighting The ICL-300 isn’t just another LED—it’s a game-changer for under-canopy lighting. Unlike traditional LED systems that project light in a single direction, the ICL-300’s 300-degree design ensures even light distribution beneath the canopy. 🌟 This unique feature means that no part of your plant is left in shadow, creating a balanced environment for lower buds to thrive. Key Tech Specs & Benefits: • 300-Degree Light Distribution: This design fills the under-canopy space with optimal light, enhancing photosynthesis where it often gets neglected. 🌱 • Full Spectrum Output: Tailored to meet the specific needs of plants at every stage, ensuring quality growth from base to apex. • Energy Efficiency: Advanced LED technology delivers maximum output with minimal energy usage, keeping costs down and sustainability up. 💡 • Durability & Heat Management: Built with high-quality materials, the ICL-300 stays cool and reliable, even in intense growing environments. Why It Matters: Under-canopy lighting is a game-changer for growers aiming to maximize yield and quality. Typically, lower buds receive less light, resulting in larfy or underdeveloped flowers. The ICL-300 changes that dynamic entirely by turning shadows into opportunity. 🌟 With light evenly dispersed across the entire plant, you’re not just growing; you’re sculpting a masterpiece. For me, the ICL-300 is more than a tool—it’s a partner in innovation. It ensures that every plant in my grow room has equal opportunity to shine, from the top colas to the smallest buds at the base. When paired with a carefully managed ecosystem, like the one powered by TrolMaster, the potential for consistent, top-quality harvests reaches new heights. This isn’t just about adding light—it’s about adding value, efficiency, and balance to the grow process. I’m beyond excited to see how the ICL-300 transforms the game in my tent, and I can’t wait to share the results with you all! 💚
Likes
17
Share
@RakonGrow
Follow
Harter ritt diese Dame , alles viel zu schwer das es gleich umknickte beim defolieren . Hab mal ein getrockneten Bud aus der mitte genommen und Trichom analyse (Videos und Bilder) gemacht . ja viel klar wenig milchig und einige rot . Ergo , zuviel Licht an der Spitze (abstand zum licht viel zu gering) und im Boden zu kalt ist keine gute Kombination .
Likes
38
Share
@Snakeking
Follow
Sweet aroma with a beautiful view This week max temp is 33 and lowest 18 degrees centigrade no rain and cloud conditions I stoped spraying neem oil and wood vinegar ,I hope pests let my girls bloom with no stress They have to protect themselves against pests and also mother nature will
Processing
Likes
12
Share
@Medicanna
Follow
QUESTION TO EVERYONE READING THIS: My tap water is pH 8.3 (yes I know right ?!) Adding the BioBizz nutes brings it down to pH 6.2 - 6.4 depending on the amount which is great. Now, I dont really care about runoff pH that much, doesnt tell me a lot imo but I measured it twice, last time it was 6.8 this time it was 7.1. Is there anything to worry about or is that just irrelevant? Thank you guys :) Day 48: Watered the Liberty Haze with 750ml Water and 2.8ml / l BioGrow, 2.8ml / l BioBloom, 0.7ml / l TopMax which is the equivalent biobizz week 7 feeding schedule with 70% strength on BioGrow & TopMax and 90% strength on the Bloom. Therefore, dont mind the leaves hanging down, I just watered before taking pictures. Also tied down one or two branches a bit more to make the side branching even again. I dont really realize how much the plant actually stretches, the Liberty Haze seems to start budding already while the G13 Haze is still a bit behind. Day 45: I really wanted to try serious and "professional" training methods. Defoliation was obviously needed, I couldnt even see what was going on below the plant. Removed all leaves except on the top 2-3 nodes of each branch. Then I did some heavy LST to move the side branches to the outside for filling up space. I hope the center will grow some branches at some point. Unfortunately, I couldnt supercrop the main branch like I did with the G13 Haze because the stem is weakened due to the partial break. It looks a bit fouly (the break wound itself) but at the same time it looks like the plant just "abandoned" the damaged tissue and continued growing using the remaining part of the stem diameter. Sounds really weird, but it definitely makes sense considering that the plant didnt even stop growing at all. ~Watered 650ml today, too Day 44: Everything seems to go well. Apart from the snap though LOL. But seriously, it doesnt seem to have affected the plant at all :D I did some LST and was very careful ! The Liberty Haze seems to be a bit stiffer than the G13 Haze so I was extra careful which was a good choice. I decided not to train the main branch anymore at all, just the side branches to keep them even. Lets see :) Also the Liberty Haze is quite smelly for not having buds yet. If it was just the G13, it wouldnt smell AT ALL and I wouldnt even have to use my carbon filter !!!
Likes
6
Share
It was overall a very very fast grow, definitely in the room im growing in now. I had 2 different lights on her and she still decided to be done within 10 weeks!
Likes
12
Share
Hola de nuevo familia, dejamos la última semana de playa power plant xL. Aquí si vemos cómo la carencia de Nitrógeno afectó las hojas bajeras, pero nada serio. Solución: alimentar más . Lo demás lo podéis observar en las fotos y videos. todo va bien a excepción de una pequeña carencia .
Likes
27
Share
@Bncgrower
Follow
Harvest done, I believe the result would be better if it hadn't suffered so much. But it's within expectations, let's see how it turns out after the drying and curing process..
Likes
32
Share
Hi guys, What's up? Welcome back to Queen Peaky's Flower Gardens We meet together again to wrap up another diary on these magnificent autoflowers We started working on the roots by rinsing them with only pH balanced water and a few little girls and Ready to be dried, preparing it for a perpetually dry trimming
Likes
1
Share
10 Wochen sind rum und die Fat Banana hängt jetzt zum Trocknen, ich rechne damit, sie in 5-6 Tagen ins Glas schneiden zu können. Bin schon sehr gespannt, wie viel ich rausbekommen habe, es riecht jedenfalls sehr fruchtig, wie nach Multivitamin Bonbons, mal sehen ob sie nach dem Trocknen auch noch so riecht. Fat Banana Auto von RQS gehört zu meinem ersten Tagebuch, das ich auf Growdiaries gestartet habe. Leider wird das komplette Tagebuch nicht angezeigt, in dem ich Fat Banana, Cookies Gelato und Green Gelato zeige, warum auch immer, selbst der Support konnte mir nicht helfen 🤷🏻‍♂️ Naja deswegen dachte ich mir, ich lasse euch teilhaben an dem Tagebuch und habe die Bilder von vor 2 Jahren aus dem alten Tagebuch hochgeladen. Sie war wirklich sehr angenehm zu Rauchen und ich werde sie wohl bald mal wieder machen 😊
Likes
4
Share
@Facocero
Follow
È iniziata da poco la 4°settima, sembra stiano crescendo bene le piccole😍 in questi giorni mi sono dedicato a un po' di defogliazione e di giorno in giorno cerco di migliorare LST per favorire la penetrazione della luce. Alzato il dimmer al 75% e ho allontanato un po' la lampada dalle piante e sembra stia o reagendo bene! Spero tanto di fare un buon lavoro! 💪 Ai prossimi aggiornamenti! AGGIORNAMENTO: Sono passati 2 giorni dalle ultime foto pubblicate, si stanno infoltendo per bene le piccole😍 aspetterò ancora un altro po' per mandarle in fioritura,vorrei riuscire ad occupare più spazio superficiale possibile. Sto alternando con le annaffiature fertilizzando moderatamente una volta si e una no.. per il momento sembra tutto ok!😎
Likes
12
Share
Flushing as we speak! Chopping this plant in 2 days to get a harvest done before the competition ends! This is an amazingly fast plant! Resin production- ✅ Terps - ✅ Fast - ✅ Easy to grow - ✅ I cannot say enough about this lady! Just fed an average amount of nutrients. Vegged a little longer because of flower tent overflow, but once she flipped, she was fast and quality all the way! More details to come! ✌️🏻💚
Likes
8
Share
Diese Woche kam endlich mein Luftbefeuchter von AC Infintiy an, habe die Luftfeuchtigkeit gleich mal auf 75% hochgeschraubt, ich denke in der aktuellen Phase habe ich noch kein hohes Risiko mit Schimmer. Ich werde die gleiche Luftfeuchtigkeit noch in der vierten Woche halten und danach suggestiv um 5% pro Woche runter gehen. Außerdem habe ich diese Woche eine halbe BTI Tablette auf 10l Wasser eingesetzt um die Trauermücken ein bisschen unter Kontrolle zu bekommen. Außerdem habe ich Reismilch angesetzt, selbige werde ich morgen mit Milch mischen, dann einige Tage warten und dann die daraus resultierende Milchsäure als Zusatz für das Gießwasser zu geben.