Day 65, 17th of November 2020: Welcome back at the beggining of the 3rd week of flowering. They seem to be stopped streching and now concentrating on buds. All of them are gorgeous..... The 2 Zamnesia genetics Gelato and Kalini Asia are pretty and buds are forming nicely. Kalini Asia might strech a bit more but not long. The Sweet Seed ones are really nice and I am so happy because Red Hot Cookies is already getting red.... pistils and around the leaves.. I hope the same happens to the Red Mandarine and Tropicanna Poison also. They are so gorgeous. They calmed down I don't expect more strech. Fertilization still the same every 2nd day with the ratio and mix above. Some lollipopping (Defoliation) is also done. I removed all the LST the plant remains in the same shape from now. The lamp is on 11.30 min and off 12.30 min. Last week was 15 min longer light cycle.... So every week 15 min shorter light cycle until the 5th week. So far -30 min. It switches on at 6 am and off at 17.30 pm.

On 8/3 I got essential oils of lemon and eucalyptus and sprayed the smell was beautiful, on 9/3 I can already see the benefits from the oils spray, check the video, and now Phytoseiulus persimilis arrived, I immediately added em in the tent, hopefully now I will defeat spider mites, I feel confident as I can see plant get better day by day. In order to get the proper environment for the predators I raised humidity to 60%, and got light back at 80%, so did the temps raise. We'll see.. wish me luck

I had to leave the garden unattended for 3 days and when I got back it was really a mess. The top had suprecroped on itself and it totally gave up on growing the main stem. Lots of side branching had to be tucked back in to the net before it became manageable again. Looks well and, besides the mess of branches, it looks like the supercrop didn't cripple her growth.

March 3: Added a few pics. All is growing right on target! Buds are starting to stack and I absolutely love the smell coming out of the flower room. These next 3-4 weeks are my favorite 😊 March 1: Four weeks since light switchover to 12/12. Technically I call this end of week 2 of flowering since I don't count pre-flower. Managed to get a video although the quality isn't what I would like. Grow is going very well. I kept 4 plants that I didn't top as an experiment this grow since I always top and have never let them go au natural :-) Last time I do that though. Feeding big bloom at a rate of 3 tsp per gallon every other watering. Going to add some bloom boost this upcoming week. I'm quite happy all in all with how this particular grow is going. Humidity got a bit high this week 60 and I immediately took steps to remedy this. Now humidity is around 50. Don't want dreaded bud rot! I'll add some additional pictures this week in the meantime enjoy the video and beware of dog near the end :-D

the roots broke the plastic basket😱 Very strong genetic, very recommended👽

Hi guys Within 48 hours all 3 broke the soil, just waiting on the blackberry moonrock to make a appearance. Not much to say at the moment but ill keep you updated on the blackberry moonrock from tastebud genetics. Happy growing gang 💚💪👌 Hey guys so the blackberry moonrock from tastebuds has decided to pop out the soil today 😀 so 4 out of 4 the freebie was a late starter lol. Its ment to be a 33% thc indica so hopefully i can hit the high 20z. Happy growing guys 💚👌

Zkittlez Feminized by Club Riot Seeds ( www.clubriotseeds.com ) Week 1 0.5L Pot LED: MIGRO 200 (210W) for Veg. Stage Canna COCO Seeds are put at germinated in wet paper towels for 72 hours Name: Zkittlez Feminized Genetic: Grape Ape x Grapefruit Type: Feminized ( Indica Strain ) Indoor Yield: 80 ~ 140 grams/plant ( 15L Pot ) with LST growth technique. Indoor Height: 70 ~ 110 cm THC: Very High CBD: Low Flavour: Grape , Sweet , Berry . Effect: Relaxed , Happy and Euphoric.

Coming along nicely, staying short & stout. I've had NL flower that smelled unbelievably beautiful & it was a great night time relaxing strain. I hope this one is similar

Big thanks to @James from the Royal Queen Seeds team for this stuff! Definitely one of my favorite strains.

Bonjour à tous les padawans et les maîtres jedis Pour cette semaine 4 au jour 23 ma plante fais 17 centimètres et son sixième noeud apparaît je décide donc de pratiquer un LST sur ma plante. Pour ce j'utilise du fil de fer galvanisé que je plante directement dans le substrat en faisant attention de ne pas endommagé les racines car n'oublions pas que ce qui pousse dessus pousse aussi dessous. Jour 17 je pulvérise du une solution composé d'une cuillère à café de savon noir mou dilué dans un litre d'eau en prévention d'éventuels nuisibles. Je corrige mon LST suivant la pousse de ma plante ... Pour ma par c'est la manière dont je procède mais petit rappel de la technique du LST: Quand commencer à appliquer la technique LST De nombreux cultivateurs commencent la manipulation dés que les plantes possèdent entre 3 et 6 nœuds ou une paire de feuilles. Durant cette première étape de la croissance, le tronc encore flexible est pliable sans risque qu’il ne se casse, même si au fur et à mesure du développement de la plante il sera de plus en plus difficile de le plier. Nous pouvons continuer à guider la croissance des branches durant toute la culture, même durant la floraison, ce qui pour cette étape représente un grand avantage face à la taille, qui n’est pas du tout recommandé une fois que la formation des têtes commence, cela stressera en effet la plante, ce qui aura pour effet de retarder la récolte. Comment appliquer la technique de guidage LST Si nous sommes prudents, la flexibilité naturelle des fibres du cannabis permet de plier leur tronc et branches avec une relative facilitée, même durant la floraison des plantes. En utilisant une corde fine, nous pouvons accrocher la pointe de la plante à la base du pot par exemple ou à un tuteur que nous aurons planté dans le substrat. Nous plierons le tronc avec précaution et nous le fixerons avec la corde, à partir de là, nous pouvons augmenter progressivement la tension de la corde, chaque jour un peu plus, jusqu’à obtenir la position souhaitée. Soyez attentif à la réaction de la plante, essayez de ne pas appliquer trop de pression sur la corde et rappelez-vous que la flexibilité des branches peut varier d’une plante à l’autre. Pour obtenir de meilleurs résultats, il suffit de suivre quelques règles simples. Pour commencer, nous devons choisir une corde fine mais pas trop pour ne pas blesser les troncs au fur et à mesure qu’ils grandissent et qu’ils deviennent plus gros. Nous pouvons utiliser des crochets en plastique souple ou de n’importe quelle autre matière flexible pour éviter d’endommager les plantes. Spécialement en intérieur, utiliser des cordons en plastique de couleur (voir les diaries de @Silky) est très pratique pour voir facilement les accroches et faciliter le travail au milieu du réseau formés par les cordes, les tuteurs, les mailles ou les supports que nous aurons dans la culture. Bien entendu, en culture extérieure et surtout en guerilla nous ferons juste le contraire et nous utiliserons des matériaux de couleur qui n’attirent pas l’attention pour que notre jardin reste discret. Pour stresser les plantes au minimum, la mieux est de réaliser ces manipulations le soir ou juste après que les lampes en intérieur s’éteignent, ce qui leur permettra de se remettre durant la nuit. Normalement, le jour suivant nous pourrons observer comme les pointes des branches que nous avons pliées se dressent de nouveau vers le haut à la recherche d’une source de lumière. Je combine un pincage d'Apex au LST cela me permettra d'avoir une canopé plus homogène donc une meilleure pénétration lumineuse et par conséquent un meilleur rendement. Que la force soit avec vous💪

It's been 68 days of flower now and they only got another week or week and a half left. I have been flushing them for 10 days now. Almost there 🤘🤘. I'm very happy how they have turned out, the color, the smell, the crystals 👍. Very proud of what I created. VERY IMPRESSED with the fc4800 and I was already very happy with the tsw2000 👍 The gals are still loving the new fc4800, TSW2000 and their new 8x8 mars hydro grow tent as much as I do👍 leaves are sticking straight up towards the light. Love how easy the zippers are to open and close. Nice and strong and guaranteed to last. It has extra material on the backside of the zipper that helps for light leaksand enough ports and vents for anything you need in it👍. the tsw2000 is still going strong and is also a very good light. Its been going almost nonstop for 6 months and still working the same as when I got it👍. not much heat off both lights but the fc4800 is alot cooler and the heat-sinks work extremely well. I have it daisy chained to the tsw2000 and 1 dimmer controls the other and i don't need to be reaching in too far to dim the other light, it's awesome and I can't wait to buy more lights to daisy 4 together👍. I would recommend this light to everyone that grows with leds and have trouble with temperatures getting too high. Even if you grow with HPS lights I think any mars hydro light is a MUST TRY. I like how heavy both lights are because I know it means they are built soild and strong 💪. Very good sign with the frost they are starting to get thanks to bith mars hydro lights. I can notice more frost under the fc4800 and I'm thinking it's from the UV DIODES they put on the fc4800 👍. 2 days ago they all smelt like my nuken, sweet marshmallows. But now I can smell the monkey dough and gorilla glue and skunk monkey coming through👍. I touched a bud on the gorilla and monkey fingers smelt like fruit loops👍 really pleasant smell. Lingered on my fingers for atleast 30 min. I'm glad mars hydro is under priced compared to some brands and for how popular they are. usually companies would charge more. Thanks mars you guys are awesome 🤘🥁🎸. I'm getting a new exhaust fan soon. An 8 inch that will work alot better than my 4 inch lol. Wayyy to small for a 8x8 Grow Tent. Dehumidifier is going almost non stop to try and get the humidity down. I love how both lights on 100% power only raise my temperature 2 or 3 degrees 👍. You can rest your hand on the lights and not much heat comes off them. Obviously there is some heat but for the brightness of the lights and only raising the temp that much is awesome 👌.  And if I wanted to I could remove the driver from the fc4800 and run it on the outside of my tent because the cord is so long but 2 or 3 degrees is barely nothing👍. The girls are starting to bulk up abit now and only 3 weeks of flowering, these lights are awesome 👌.  My last run of monkey dough and gorilla glue didn't start showing alot of crystals until week 4. These were only 2.5 weeks and I started noticing some frost. Next week I will be able to tell more about what these custom bred seeds will be like. I love how the smell is changing now. Didn't want all them to smell like nuken marshmallows lol. It's awesome that I can get right inside the tent to do any work i need👍. Even if I wanted an 4x8 tent. I'd rather this 8x8 because it's so easy to work with the plants and have so much room to move around and massive headroom when I'm in there chillin with the gals🤣🤘. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress2 Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

the plant and at the end of this week only water and ice 4 days and then 3 without water and then I cut it and leave it to dr

She received 100ml of made solutions of an E.C of 1.7 before I repotted her she has received no water. She is about 10 cm with long internode spacing. Another set of five fingered leaves coming through the peak. Maturity is on the horizon. The next feed signs of wilting!

Thanks for stopping by.. Please hit the like button if you like what you see and ill be sure to check you out too Growmies 🌱 First of all would like to give a BIG shout out to my sponsors for providing me with the necessary items for this grow 👍 🌟🌟🌟🌟Mars Hydro FC4800🌟🌟🌟🌟 Powered By Samsung LM301B Diodes: The Mars Hydro FC 4800 480-watt LED grow light is installed with high-performance Samsung LM301B chips, the top-bin horticultural diodes, to provide a high Photosynthetic photon efficacy efficiency of 2.85 μmol/j and a long-lasting color rendering capability, supporting indoor plants to grow and thrive. High PPF Output and Uniform Light Distribution: FC4800 provides a high PPF of 1,366 μmol/S. The multi-light bar design and the dense diode layout facilitate an even distribution of grow lighting making PPFD optimized for Photosynthesis to achieve consistent growth in every part of the coverage range. Exclusive Recipe Of Full Spectrum Lighting: The full spectrum is enhanced with blue and red light, in which the blue light stimulates plant growth and promotes the accumulation of plant-based phytochemicals; the abundant red light improves the maturing process and flower quality of the plants. 🌟🌟🌟 FastBuds Purple Lemonade FF ⭐️ ⭐️⭐️ Arising from a cross between purple and citrus Cali genetics, Purple Lemonade FF (Fastflowering) offers a complex high made up of perfectly balanced cerebral and body effects that are ideal for daytime use. Expect an extremely enjoyable high that boosts your mood while deeply relaxing your whole body and getting rid of muscle pain. This meticulous cross produces up to 550 g/m2 of some of the most beautiful purple buds, with pinkish and reddish hues that will catch everyone’s attention. The beautiful purple buds are ready for harvest in 7-8 weeks and come hand-in-hand with unbelievably sugary citrus terps that are just as refreshing as a cold lemonade on a hot Summer day. It’s the ideal variety for the sweet-tooth stoner seeking strains that deliver both in quality and quantity of resin —————————————————————————————— 👊👊👊👊Down to Business 👊👊👊👊 Week 5 from seed .. So this will be the last week veg for the tent and ill be switching to 12/12 flower power 💪 She’s moving great and all is good 👌 Will keep it short and sweet for this week .. Thanks for stopping by 🙏🙏🙏

what a resin monster! such beautiful plants! one of the 2 phenos had straight peanutbutter flavor!

02.01. Tag 43 Hey Leute frohes neues! 🎆🎈🎊 Es geht gleich zum Jahreswechsel mit Problemchen weiter… …weshalb verfärben die beiden vorderen Pflanzen sich so stark? Die vorne links hat meiner Meinung nach ein calmag Defizit. Was sagt ihr? Und die vorne rechts sieht irgendwie überdüngt aus aber bei meiner Dosierung und der aktuell guten Performance könnte die auch einfach noch was Dünger brauchen? Wie seht ihr das? Gegossen: 10L Osmose Wasser 20ml CalMag 20ml BioFlores 10ml BioBoost VPD 1,3 Temp 25 RLF: 58% LED 100% (480w) —————————————————————— 05.01. Tag 46 Was ist hier los? Hab ich überdüngt? Ab jetzt erst mal nur Wasser mit calmag Sicherheitshalber! —————————————————————— 08.01. Tag 49 Heute gegossen. 10L Wasser mit 10ml calmag. —————————————-

Semanas andamento satisfatório uma esta com 4 semanas e as outras 2 com 2 e meia!nao vejo a hora de poder apreciar a engorda dessas plantas!

Weekly update on these three. They'll be getting the chop this week as they're super close to being finished. I'm looking for mostly cloudy trichs on them. Over all Happy

Week is looking good so far. Kaya's Coffee is a taller plant with less leaves than other strains. Where it lacks in leaves it adds in height. I have been removing damaged leaves from light burn slowly but surly. day 13 have leaves getting yellow on the ends... Adjusted my PH down from 6.0 to 5.5. I was keeping the PH high for the plants to take up more Cal-Mag. So I'm thinking the PH is keeping them from taking up Nitrogen causing the plant to take it from other leaves.