Seeds all successfully sprouted, The first 2 seeds already emerged through the surface within a night. I used zero nutrient supplements or any additives in this germination phase. You'll notice in the beginning i had 5 seeds and end up with 3 plants, Basically one i gave away; but the other i fucked up somewhere planting them (never gonna do that high again). EDIT: I forgot i received some Auto Lemon Haze in my package order, that will make up to 4 plants that completes the R-DWC.

This Strain stood strong even though I threw a lot of stress at her with moving into a new box and changing lights. 2/3 hermed a bit but it looks like there are only a few seeds produced. Very happy about the harvest when looking back at her come up.

Day 63 veg last day of veg going to.give plants a 36hour dark period before the flick some leafs are still looking slightly yellow super cropped few of the longer branches to.help maintainneven canopy when going 12/12 lights are on 600w settings to get it ready for.flowering

I had a little pH dip the other day and the leaves showed some magnesium deficiency. I am not super worried. These leaves are far from final ones. She has grown pretty well beside that pH issue. It should be solved now. I was feeding a little strong. I still kinda am. She is doing good under the G300W Spider Farmer light. I have it like 25 percent right now everything looks good now. Thank you Spider Farmer, and Amsterdam Marijuana Seeds. 🤜🤛💪🌱 Www.amsterdammarijuanaseeds.com Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer G300w: https://amzn.to/3S2zvsd Spider Farmer 10X20 Heat Mat Kit - https://amz.fun/lsa0J Spider Farmer Amazon Store: https://www.amazon.com/spiderfarmer Spider Farmer Official Site: https://spider-farmer.com Discount code: saveurcash

Going good, thinned out some. Put a better video on Instagram

MAGIC STRAIN This strain easy to grow and beautiful to look at. Nice colour, incredible taste, great smell. This strain takes well to LST. Made a few mistakes, but the bud came out great overall. Very pleased and will grow again.

We noticed this week that she's growing much faster and the side branches too. See the difference between the pictures April 18th - Topping view and April 20th- Topping view, and how much the side branches had grown. Other than that, it was a week without major events :) Sorry again for the pictures under the grow light.

Thank you growdiaries for all the support

#seedsman420growoff and #SeedsmanSeeds 📆 Week 5, 25-31 May 2024 25-27 May - Observed and let the plant grow. 28 May - Defoliated plant. 29 May - Placed scrog ring on trellis system, bent top of plant over 90 degrees, adjusted and spread branches (see pictures). 30-31 May - Observed and let the plant grow. 📑 I’m very pleased with the way this plant has responded to the nutrient schedule so far. Now it is time to see how she will do with training. I like using a version of the scrog method most because it gives me the greatest space for bud growth overall. My experiences have taught me that under these lights there is about 15-18” worth of quality vertical bud potential. Anything below that line is only draining on the plant, and not receiving adeqate DLI. So I dont need to focus on a tall plant - rather a wide one. Now that she is under a scrog the DLI has a significant canopy increase. What I’ve done with this plant is cut all side shoots off the main branches up to the scrog. She will grow for another week to allow all for growth to develop just above that and then be flipped to flower. I’ve never grown this plant before, but assumeing she can double her size during pre-flower, I’ll have plenty of room in my grow tent. The Trellis System: is made with 1/2” (12.7mm) white, SharkBite PEX, 1/2” pex clamps, small screws/nuts #6-32 x 3/8 in (to hold clamps opposite each other, this is what holds the structure together, side bars, rings, scrog), 1/2” pex straight coupling connectors (to connect rings, and extensions), nylon tape and nylon cord. The frame design is independant from the bucket and can be put on anytime before or after the start of the grow. It simply snaps together (nothing needs to be crimpted), the rings stay in tact with coupling and tape, the netting is strung once for the most part, I prefere 2” squares, and held in place by clamps. The size of the rings depends on the size of your pot, the bottom and top ring are measured seperately. The scrog ring is determined by the size of the tent or desired spread. It takes 5 side bars evenly spaced apart and snapped on the bottom ring 1st to hold the frame sturdy in place, their length should start flat from the bottom to about 8” above the top of the bucket. Place the pot into the bottom ring with 5 side bars already attached, lift up the bars, then put on and attach the top ring, this prevents it from moving. Both are then placed on a 12” Bonsai turn table for easy access and observation of the plant. The final scrog is placed on when the desired height is close to being achieved, then maneuvered down over the plant. A simple design that allows you to easily adjust the netting (place extenders on side bars faceing in opposite direction for additional height) and opens many other possabilities for training. See pictures for an example. 🍶 25 May nutrient solution changed 🍽️ 25 May feeding schedule updated 💧 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient Solution EC 2.3 at 73 degree F 🔆 Light power at 60%, DLI 30-35 canopy coverage at 18hrs 😤 Using General Hydroponics, HGC728040, Dual Diaphragm Air Pump, 320 GPH That is it for this week. Thanks for the look, read and stopping by.

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Hi everyone 😃. Short update : I cut it back again extremely and will only put it into bloom in 7-14 days :-). have fun with the update. stay healthy 👍 You can buy this Strain at : https://www.zamnesia.com/de/5165-zamnesia-seeds-kalini-asia-feminisiert.html Type: Kalini Asia ☝️🏼 Genetics: Black Domina x Purple Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Gorilla glue auto: It keeps growing and forming buds... 50 centimeters This week I put in a dehumidifier to see if the humidity goes down... 70% humidity I increased the dimmer to 80% with the distance of 40 centimeters Gorilla glue#4 photoperiod: In the 5th week of gorilla glue 4 I did the first topping on the plant...

Day 40-03/09/22 sorry for not updating but haven’t been well and was very busy but again this is second time I’ve grown this now and idk the genetics have a mind of there own but we will see

Killer purps is growing great! This plant suprises me everyday with more and more new growth. This plant gives off a really skunk type of diesel smell combined with a fruity maybe blueberry sort of smell. Alot of resin on the sugar leaves. Some of the pistils are already turning orange. Happy growing everyone. Hoping for atleast 2.5 ounces but fingers crossed what do you think my yield would be.???🤔

Day 4 of week 2 in veg 🎉🎉 She looking good and happy 😎✌️🌱🌱 Chanced hear pot with a 4 liter... Still so happy cant wait to se hear scrogging 🤣😎✌️ Hope yall enjoy have a good one growmies ❤️🌼

For LIQUIDS & NUTES ******GREEN BUZZ NUTRIENTS***** organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.

Week 10 Getting in shape :), colas are forming, did a slight defoliation for bottom leaves that would block lower budsites Using both lights (250watts total) DWC water system, she's really drinking around 15L per week~ Water temp around 23-24C Humidity still at 40%

Light is at 30% power.