Well I'm a bit upset last week I ended up dropping my ph meter in a tank of nutes I was mixing and by the time I got it out the meter was junk. I was planning on flushing the crystal but had to wait another week for the meter. I suppose the good thing to take from this was I found out why I was having issues with my plants. When the new ph meter came in I went to check my run off and my nutes that I had all ready mixed up. It turns out that my meter i had been using this whole grow was off by about -2-2.5 so this whole time I had been feeding the plants at around 3ph smfh. I cant believe they look how they do knowing what went on this whole time. Fastbuds crystal meth is 3days into flush and i will be cutting it down this weekend most likely. Mephisto hubbabubbasmelloscope is smelling like sweet sweet candy and is thick in resin Bighead seeds freeze berry/ blueberry crumble has a dank pungent stank to it and also is frosty but larrfy Big bomb is still growing thick and have bud sites everywhere Now I'm ready for the next batch and ready to get dialed in!

She's showing some purple and some cloudy trics :)

I left my brother to mist the seedlings whilst i was in amsterdam for 4 days, got back expecting growth but found the plants have stretched and looked leggy and not much growth apart from stretch…(should have took photos before repot) I planted the seedlings in clear plastic cups with holes punched into the bottom, the medium was very moist and wasn’t seeming to dry out soo i decided i would repot in red cups as i heard clear cups are bad for roots…(feed the girls very lighly was due to bad drainage more then over watering)… I used fresh coco and pulled away as much moist coco as possible without disturbing roots, i added great white to the medium and root balls of the seedlings and repotted burying the stretched stem as much as possible… I didn't water the coco prior or after the repot as i didn’t want to stress the plant further if the roots have been getting drowned by excess water in the coco due to poor drainage, i sprayed mist above all seedlings when all was transplanted very very lightly with a micro dose of rhizotonic by canna… 1 blueberry muffin seedling looks like its going to die the other 2 are okay. I have attached photos after transplant should have photographed before transplant but didn’t 😅 When should i water next seedlings are hard work i usually runs clones that come of a defent size and root structure…🤷‍♂️ My ppm is 150 tds from the tap Ec is 0.4 out the tap Im dechlorising my water with tap safe for 24 hours before use. I have been recommended to ph to 5.8 is this correct ? My temps are around 23-28 degrees And humidity around 55% - 80% Love for reading this far, i will be posting a update every week, Any help or advise would be greatly appreciated 👊❤️

Good week

💩Holy Crap Growmies We Are Back💩 Well after another short break we are back at it 😁 So what do you say we have some fun 👈 We got us the Strawberry Pie from FASTBUDS 😛 Seed soaked for 24 then placed in a tub with paper towels , once it cracked and rooted , placed into its main pot 👌 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

Week 10: 20/4 light schedule, 150 mp water per plant 2x, no fertilization anymore. Day 65: Next week Tueasday/beggining week 11/ we need to harvest because they will come from the council to check the house😂 Well, the previous one finished in 69 days, but I think they won't be properly ready by next week. I tried it and made me high anyways. I would give at least 2 weeks more to be done. Tomorrow I will check the trichomes with magnifying glass. They are beautiful stinky girls. Flowers are getting thicker and pistils are getting brownish. Day 66: I checked the trichomes with magnifying glass and it will be ready by next Tuesday. 7 days left with this day. They are beautiful just check in the video (Day 66). Day 67: It is crazy the last 3 days was so hot here in London. Today was 38 degrees!!!!!! Poor plants even with ventilation it goes up to 30-31 degrees. Well, it is alright because direct ventilation goes on so they won't be cooked. 😓😛 Day 70: It is the last day when they receive water and they just get once and half of the daily intake. 2 days before harvest I will not water them. Harvest day is on Tuesday 30th of July when they are 72 days old. I have checked the trichomes all good they are matured nicely cloudy so now it is very strong. They are very stinky girls 😋 Day 71: No more water for them..... Tomorrow is harvest day!!!!!😋

Girls look pretty, buds forming great.

6.1. - Plants are looking very good. First branches are already developing, so I guess I will have to start with LST soon. 8.1. - First branches are shooting out, leaves and plants overall are getting bigger. I hope they'll keep this tempo and health. Watered. 9.1. - Today I've decided to apply some LST and I accidentally snapped off the main stem of one Creamatic. I've fixed it back with tape, but not sure how it will end. 😔 10.1. - I've checked the broken plant and decided to remove that part. Plant already started focusing on the branches that are left, so basically one plant was topped unintentionally ✂️ 11.1. - Week wrap-up: Well, this week was half fail half success. Plants are growing fast and healthy, however I've managed to fuck them up a bit as usual. One accidentally topped plant and one with broken but healing branch. I've decided to give up on the LST of main stems completely. I will let them grow up and just spread the branches with wires. Hope next week will be more successful ✌️ 5.1. - 11.1.2024

The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. Grand Cru Genetics is a cannabis seed bank that emerged in 2018 from a group of breeders in Madrid to provide a satisfactory experience to all cannabis users. "If we do things, we do them well. Due to our experience in the sector and our taste for excellence, we know high quality and we seek it in everything we propose and do." "We have a “cultivate without giving up” philosophy that we apply to everything we do. We do not give up, we are friends of change, and we adapt as necessary in a still restricted sector." "We speak relaxed because we know how to relax. We are not intense or preachy; we accept everyone as they are, and we understand that farming is not for everyone. But for those who do, we are here to accompany you. We like to do it and tell it. We are experts in the field because we are the first to do it. We speak from experience and connect with others because we share the passion for cultivation." "Cannabis has the ability to show us a world of possibilities. When you cultivate and live its growth process, you enjoy a path full of emotions and not just the final destination. At Grand Cru we find beauty in small things. We are attentive, observant, detail-oriented and aware of everyday things, and we savor them without rushing." In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) 18/6 with the 6 being IR. The near infrared (IR-a) borders around 700nm up to 1400nm @ photon par flux density of 1.8 instead of darkness, keeping temps overnight a neat 77F-80F. I think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, the RH will begin to drop slowly to the desired level I set, and the extraction turns off when it reaches the desired RH. The plant, as it performs cellular respiration, will always release more water into the air; therefore, the RH% of the tent overnight will increase, as long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over. This creates a strong pressure differential, which will work wonders with mass flow. Replicating high and low-pressure fronts in nature. Critical for oxygen diffusion at the critical time of peak cellular respiratory function.. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, and then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, results in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow more slowly to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.

Nothing much to report. Vertical growth has stopped, happy it has as no tent left to grow into. Trichomes building up and have done some sporadic defoilation.

The bananas are quite progressive, they were like this from the start, they are one node ahead of their sisters. Planning to top them at the 6th node this time and give around 5-6 weeks of veg.

here are the kids in week 4. man did they blow up! I have fed them 3 times so far. the last 2 times have been with big bloom and grow big. they seem to really like the new soil and nutes. I topped Ursula and started her on LST. I tied down the 24k" ruth" 7 days ago and she just filled the fuck out! so im hoping to have the same results with Ursula. ol Kathy skunk really started to fill in too. I germed the last seed I had and started it in ffof. I have read that ocean forest can burn seedlings ,but its doing pretty well in there. we will just have to wait and see.

Week 10 - Flower Week 3 Ambassador Cartwright Ambassador Cartwright by IRIE Genetics Transition to Flower Afterglow X Arise (Clementine X Arise) X Arise ((Tangie X Lemon Skunk) X Arise) X Arise ______________________________________ Start of Week: Saturday 10 September 2022 AC3Q 57:F:3:1 to 17 September 2022 Summary: Plant HeightBeginningOfWeek: [ 20, in] Plant HeightEndOfWeek: [ 26, in] *TBD* Temp: 74.8 RH: 70.7 VPD: 0.88 kPa # need to get into the 0.9 -> 1.1 Early Flower Autofertigation - Enable - [ ] Growtek RINGS Calibrated - [ ] Growtek RINGS INSTALLED - [ ] Growtek OPERATIONAL LightSchedule: 12/12 amt: [ 1300, ml] # period: [ 360, min] frequency: [1, day] times: { first: 2100, second: 0300 } # Auto Only!!! Otherwise 1.3 @ 2100 Environment: EC Targets: # rel. | abs (rel + source) ECseedling: [0.4, 0.5] [ 0.7, 0.8] ECearlyveg: [ 1.1, 1.4] [ 1.4, 1.7] EClateveg: [ 1.2. 1.5] [ 1.7, 1.8] ECearlybloom: [ 1.1, 1.4] [ 1.4, 1.7] EClatebloom: [ 1.3, 1.6] [ 1.6, 1.9] ECripen: [ 0.8, 1.1] [ 1.1, 1.4] ECflush: [ 0.0, 0.2] Seedling Early Veg Late Veg Early Bloom Late Bloom Ripen Flush 400* – 500 1100 – 1400 1200 – 1500 1100 – 1400 1300 – 1600 800 - 1100 0 - 200 Fertigation Daily: - {pid: 4, amt: 1300 ml, ec: 2.0, pHRange: [ 5.5, 6.5], time: 2130} - {pid: 7, amt: 1300 ml, ec: 2.0, pHRange: [ 5.5, 6.5], time: 2130} FertigationtheRootedLeafFullRatios: # Flower Week 3 Primer A: [ 10] Primer B: [ 10] CalMag Fuel: [ 6] Silica Skin: [ 4] Lush Green: [ 4 ] Root Anchor [ 6] Peak Bloom [ 4] Resin Bloom [ 2] Last Week of Foliar FoliarMonday: Solar Wind: [ 2.5, ml, 500, ml] Silica Skin: [ 2.5, ml, 500, ml] FoliarWednesday: CalMag Fuel: [ 2.5, ml, 500, ml] Lush Green: [ 0.63, ml, 500, ml] FoliarFriday: Solar Wind: [ 2.5, ml, 500, ml] Peak Bloom: [ 0.63, ml, 500, ml] # Cease Begininning Flower Week 5 NEW WEEK Week's Plan - (Added Veg week to allow SuperCropped Mains HEAL.) - [ ] Install Growtek Fertigation w/ 8” Rings - [ ] Run Feed Lines & Cut to Optimal Length - [ ] Calibrate Feed - [ ] Install Drain Lines, Cut to Optimal Length - [ ] Notch Drain Tube end to eliminate vacuum against drain pan _____ Sat 10 Sep 2022 AC3Q 57:F:3:1 # PM - [x] As Below Fertigation: pid: 4, amt: [ 1300, ml], ec: 2.2 pid: 7, amt: [ 1300, ml], ec: 2.2 LightIntensity: [ 824, µMol/m2/s2] LightDLI: [53.4, mol/m2/d] Sun 11 Sep 2022 # AM IS 9PM Local TIme, the Night BEFORE. AC3Q 58:F:3:2 NOTE: - We’ve added a couple inches removing all restraints, and having flipped last week. As frequently observed, Both plants were clearly vibrant and vigorous after a nights sleep after restraint removal. - Zymes/Bonners/Ascorbic Acid - Soil surface, container sides, and container bottom (exposed roots) - [x] As Below Fertigation: pid: 4, amt: [ 1200, ml], ec: 2.4 pid: 7, amt: [ 1000, ml], ec: 2.4 # AM - [x] Complete Previous Weeks GrowDiaries - [x] As Below Fertigation: pid: 4, amt: [ 1200, ml], ec: 2.4 pid: 7, amt: [ 1200, ml], ec: 2.4 # PM - None Mon 12 Sep 2022 AC3Q 59:F:3:3 # AM - [x] As Below Fertigation: pid: 4, amt: [ 1200, ml], ec: 2.4 pid: 7, amt: [ 1200, ml], ec: 2.4 - [x] As Below FoliarMonday: Solar Wind: [ 2.5, ml, 500, ml] Silica Skin: [ 2.5, ml, 500, ml] Tuesday 13 Sep 2022 # AC3Q 60:F:3:4 # AM - [x] As Below Fertigation: pid: 4, amt: [ 1200, ml], ec: 2.4 pid: 7, amt: [ 1200, ml], ec: 2.4 Wednedsay 14 Sep 2022 # AC3Q 61:F:3:5 #AM - [x] As Below Fertigation: pid: 4, amt: [ 1300, ml], ec: 2.2 pid: 7, amt: [ 1300, ml], ec: 2.2 - [x] Apply as Below FoliarWednesday: CalMag Fuel: [ 2.5, ml, 500, ml] Lush Green: [ 0.63, ml, 500, ml] Thursday 15 September 2022 # AC3Q 62:F:3:6 # AM - [x] As Below Fertigation: pid: 4, amt: [ 1200, ml], ec: 2.2 pid: 7, amt: [ 1200, ml], ec: 2.2 Friday 16 September 2022 # AC3Q 63:F:3:7 # AM - # PM - [x] As Below Fertigation: pid: 4, amt: [ 1400, ml], ec: 2.4 pid: 7, amt: [ 1400, ml], ec: 2.4 _______ Saturday 17 AC3Q 64:F:4:1 CEASED FOLIAR Application: 2022-09-17T16:02:06-0500 # - [X] Complete Week’s GrowDiaries

Hello guys, Here I am again to present you a new run, still with the best leds of the market nevertheless as I changed my growing space from 120x120 to 150x150. So I had to update the material inside... I will run with 3 EVO 5-150 lamps of 320W or 960W with Bluetooth dimmers. For the Hydro system, it will be the V-SYSTEM from Alienhydroponics. In fertilizers I am always with Advanced Nutrients. I work with osmosis water. Currently, 4 clones took on 4. Once the roots are ready, I will transfer the cuttings from the propagator to the V-SYSTEM. ------------------------ since the 16/08, when I transplanted the plants in the RDWC system, I noticed some points that I will mention below and correct next time. 1. The cuttings are too small, allow enough time so that I can completely fill my pots with clay balls. 2. Cut out the bottom of the pots from the cuttings. 3. 3/4 of the cuttings are touching the water, so one is late. Next time when transplanting, add more water, up to the basket in order to immerse all the plants and not to create a difference between each one, consequence now I have 3 that are ready to explode and one that will struggle behind, problem corrected today by increasing the volume of water. 4. The b-52 is a real pain in the ass in RDWC, you have to clean the 2 filters almost every day, with this new soup I'm testing without and I think I'll continue like this just with the base sensi grow A and B, as I use Root rot X, I won't use voodoo juice since all the bacteria would be killed. 5. Use of Voodoo Juice is useless if using Root Rot X which will kill the bacteria. I don't know why but when I transplanted in the RDWC, I put my set up in growth mode, except that the plants were not ready for it, moreover, I made a FIM on each. So I lost some days, these last days I went back to a ppdf of 150, now that my roots touch the water, I declare growth 0 on 22/08, I will do between 21 and 28 days of growth. And as my roots are doing well and touching the water I'll go to a PPFD of 300 ++

Week 12: Pineapple Poison - Flower Power & A Towering Princess Emerges! Yo growmies! Flowering watch is officially over, and guess what? The Pineapple Poison is throwing a bud party! We spotted the first signs last week - tiny white hairs like a shy hello from the flowering fairies. This week, those hairs are getting bolder, multiplying like rabbits in a magic hat! Flower power, activate! The excitement doesn't stop there. This girl is on a vertical vacation, stretching another 17cm to a whopping 155cm! That's right, she's practically taller than my 12-year-old at this point! Speaking of growth spurts, we've been blessed with a sunshine and rain tag team this week, and the Pineapple Poison is loving it. New shoots and leaves are popping up like popcorn kernels, which is why I did a little more mainlining magic. Gotta keep those popcorn nugs at bay and focus on the main event: frost-covered colas the size of pineapples! (Okay, maybe not that big, but you get the picture.) Now, the burning question: support systems. Anyone got tips on how to keep this towering beauty from toppling over? Comments are open, growmies, because this girl might need a trellis or some kind of ganja-gardening Eiffel Tower to support her future weight! Stay tuned for next week's update, where we'll see how the Pineapple Poison's flowers develop and maybe even get a hint of that legendary pineapple aroma. High fives all around!

The breeder says day 45 is the day for harvesting.. when I reached that day I started looking closely the trichomes to see when best day to harvest.. usually I wait till more less 10%amber.. however I found a bud rot in one of the other plant on my tent so I decided to chop it down on same day afraid of spreading it to Apple blossom. If that had not happened I would wait maybe 2-3 days more.

(Days 28-35) (Day 29) Everything seems to have recovered fine from topping so I transplanted into their 1.7 gallon pots. They were pretty rootbound so this should make them nice and happy. Going to start LST after recovery. Got a ton of holes poked around the rim of the bucket which should make tying down easier. I’ve been asking around on some forums and reading some articles and I’ve decided to switch out my MH bulb for the included HPS bulb. Apparently HPS bulbs will stretch the nodes out quite a bit more and provide higher PAR value for the same amount of electricity. My plants are looking pretty small for day 29. Although, that could just be from stuffing 15 plants under one 250-400w light. I’ve been powering the lights up to 400w at night and back down to 250 during the day. 400 just gets it too hot during the day (86-88) without ventilation. That temperature should be fine in veg once my co2 has really built up some mycelium. (Day 32) Just got 14/15 topped. The BCTG runt is just going to be lst’d and not topped or fimmed. I decided to just fim the plants I started later so they’d have a bit more time to recover and catch up to the others. I also LST’d all 9 quite well. Almost had a stem break but she’s doing just fine now. The deformed bbb was accidentally fimmed and as a result it’s got a very trippy looking main stem that has branched off into 6 mains. I definitely have fungus gnats. Fuckers must have got in with that coco I bought from hydro store. This has never happened to me with just promix but the benefits of coco are too much to pass up. I might order an OG BioWar/capsbennies/grubgrenade to help naturally get rid of them. I’m getting some confirmed yellowing on bottoms of the zkittlez and WW’s. They must be heavy feeders because no other plant in the tent is getting yellow like that. I’m going to feed a compost tea, top dress everything at full strength and mulch in some worm castings to help break it down faster. Will also do a foliar spray with some insect frass, microbes and m1pps. (Day 33) Got some more of that marine phytoplankton stuff to help stabilize my RO water. It’s got a good amount of soluble magnesium and trade minerals in it so that should help stop the yellowing on the zkittlez and WW. (Day 34) Things are looking great so far and they’re all recovered from topping/transplant/lst and thriving. Some slight yellowing and a few of the plants are cupping from heat and high humidity. I just put in a dehumidifier to help bring the rh down. The m39/zkittlez bagseed plant is just outpacing everything in the tent by 4-6 days. No wonder organized crime used to grow it. I hear it can completely flower in 45 days with a solid yield and very little trimming or leaf matter. It’s very weak on the high and smell though. Nonetheless it should be nostalgic to try those old terps. There is still a small chance that it’s a super vigorous zkittlez plant too. Plants should be showing sex this coming week. Hoping for 8+ fems but I can make do with just 4. 1-3 is unlikely but that would piss me off beyond belief. I’ve heard of it happening though.

She sure is turning into a pretty plant. She’s looking good!

3/6: Yesterday I fed half strength nutrients ph'd to both. Amnesia's runoff ph was 5.5. So I made another half gallon of half strength and ph'd it to 7.5 to get Amnesia's runoff to be 6.5. If only I had done this sooner and didn't mess up with the PH testing drops as opposed to using a ph meter, Amnesia's leaves could have still been green. I've been removing all of the dried, crispy ends as I find them, leaving the rest of the leaf intact to suck up as much light as possible. Timelapses are showing that the buds are fattening up well though. Trichome production has kicked in and is covering the leaves. Beautiful colors all around. 3/8: I don't think I can wait any longer to feed Amnesia. Vacation starts midday tomorrow, Thursday, and I'll be away until Monday evening. I'm mixing up a half strength nutrient mix with molasses and epsom salt. I'm also going to try to set up a timer/pump system to water sunday night.

Still battling humidity although I think I have finally came up with a solution that allows my co2 too flourish as well. I connected my outlet carbon fan to my humidity control and changed my settings to the green ban of my vpd chart. I’ll keep you guys in the loop on that.