Likes
Comments
Share
START WEEK Day 88 04/03/22 +I think maybe the video is the best way to show my garden. Exposure is all crazy in tent. +I have sort of been on cruise control. Just watching the girls grow. Actually beginning to see some trichomes appear as a silver haze ( hence Platinum OG) on some of the leaves. EXCITING!😬 +As they grow, the differences and techniques on each plant show up. One plant was slow from the start and is just beginning to flower. Partly because it has become eclipsed. +I have been "leaf picking" thru last week and will continue this week. I can't seem to keep up with the vegetation. I am beginning to get the hang of it. +I will do a complete Reservoir change this week. +ppm at or just above 1000 +pH 5.9 +I think the one plant has almost stopped stretching +light is 100% and 24" from main canopy. Some kolas are as close as 16". Although by my design, I can see the importance of having all plants similar size and even canopy. THINKING OUT LOUD ?Do I remove the largest fan leaves? ?How large should the buds be now? They are about Quarter size. ?How far down and what grow should I remove? ?Thinking, down the road, about flush and nutrient schedule? Darkness before harvest? ORDER MORE SEEDS ANY COMMENTS OR SUGGESTIONS ALWAYS WELCOME
Likes
8
Share
@Raizativa
Follow
Una fumada con toque cítricos, una volada de otro mundo (con moderación), cogollos densos.
Likes
24
Share
So These girls are doing great in my unprofessional opinion lol. they all look like they could use a cleanup but man if I come at them again like Sweeny Todd I don't think they will make it haha. This is rolling into week 3 so I'm going to wait just a couple of days and then I'm going to hard Lolipop and defoliate just a wee tad more. I'm just worried I could herm one out and I don't really know what to do with that situation. I've been playing around with Great White and that's been fun but aside from that, I'm just weaving these tops through squares. those corners could be a problem but let me know in the comments if you think I need additional light in the center or your thoughts. OH, I ALMOST FRGT LOL! so I mixed microflora and aqua flakes B together and the plants might have sat in that while I cried for an hour over the hundreds in nutrients I just ruined lol. I dumped the system and redid it though so we gucci
Likes
4
Share
@Fatbudz
Follow
Week3 this third week was not easy. I went crazy from the pruning I did the week before. I chose to do it at the beginning of flowering so that the main bunches and branches were more exposed to light. and of course maybe I've been stressing the little one but now entering the 4th week she seems to be recovering. maybe I'm just tripping but it seems to have slowed down a bit. what scares me is how slow the buds take to grow and get fat. Warning!! I can't forget that the strain is fast flowering !! let's see how it goes...
Likes
21
Share
@Lazuli
Follow
Was fun to grow and looks beautifull in any garden 💜 u can really taste the blueberry crossed in this strain
Likes
9
Share
Noticed a bit of sudden yellowing, I am assuming it is nitrogen. But I only have Gaia Green 3-0-3, 4-4-4, and the 2-8-4 power bloom. The issue is most likely my Ph pen being out of range, I am going to have to calibrate it weekly. I just top dressed with the 2-8-4 about a week ago, so I am a bit unsure, I don't wanna add too much more and possibly cause other issues. Watering about a litre per day now, watering every 2 days it seems to dry out too much.
Likes
24
Share
@BUZIMAN
Follow
I think this is one of those last weeks, I'm going to start rinsing it💦. It smells amazing!😎☮️
Likes
19
Share
@Deepgrow
Follow
Primera semana de floracion, 7 dias, ciclo de luz 1212 y ya veo los primeros pelitos. Empiezo a agregar pastillas easy to bloom, de Royal Queen a 2/3 de la dosis indicada por el fabricante, al bajar el PH con las pastillas agregro PH + y Ata Clean para mantener limpio el autopot, aunque se lo hecho en el riego a todas las plantas y les va bien. Las he ido doblando las colas mas largas para equilibrarlas en altura, aunque no hizo mucha falta, quite un par de hojas muy grandes y le aplique el ultimo tratamiento de prevencion con jabon fosforico e insecticida natural de aceite de Neem, por cierto, ha venido muy bien, 0 bichos. Quiza le aplique en un par de semanas cola de caballo para prevenir hongos.
Likes
Comments
Share
@BruWeed
Follow
11/10 - empezo su quinta semana de floración. Se encuentra perfecta, su olor es muy fuerte y esta muy resinosa. No tuve ningún problema hasta el momento. Su evolución fue muy rapida en comparación a otras geneticas que cultive. Aprox le faltaría un mes mas para ya poder podarla, los pistillos se encientran muy blancos por el momento.
Likes
30
Share
Just up potted to a 5 gallon pot. She’s going to get one more week of veg then flipping over to flower. She is staying pretty tight…
Likes
45
Share
2nd net is up. Early bud formations are promising. holding up to the extremes pretty well, some leaves taking minor damage, but overall, she is holding up, gave her 1 night at 50F see how she would react, stressful. Not advised as it messes with her metabolism, but I want to see if it triggers any anthocyanin response. Love to see her purp up but no signs yet. My homework. Rubisco regeneration is intrinsically linked to nitrogen supply because Rubisco is a major sink for nitrogen in plants, typically accounting for 15% to over 25% of total leaf nitrogen. The regeneration phase itself consumes nitrogen through the synthesis of the Rubisco enzyme and associated proteins (like Rubisco activase), and overall nitrogen status heavily influences the efficiency of RuBP regeneration.Structural Component: Nitrogen is an essential building block for all proteins, and the sheer abundance of the Rubisco protein makes it the single largest storage of nitrogen in the leaf. Synthesis and Activity: Adequate nitrogen supply is crucial for the synthesis and maintenance of sufficient Rubisco enzyme and Rubisco activase (Rca), the regulatory protein responsible for maintaining Rubisco's active state. Nitrogen deficiency leads to a decrease in the content and activity of both Rubisco and Rca, which in turn limits the maximum carboxylation rate, Vmax, and the rate of RuBP regeneration Jmax, thus reducing overall photosynthetic capacity. Nitrogen Storage and Remobilization: Rubisco can act as a temporary nitrogen storage protein, which is degraded to remobilize nitrogen to other growing parts of the plant, especially under conditions of nitrogen deficiency or senescence. Nitrogen Use Efficiency (NUE): The allocation of nitrogen to Rubisco is a key determinant of a plant's photosynthetic nitrogen use efficiency (PNUE). In high-nitrogen conditions, plants may accumulate a surplus of Rubisco, which may not be fully activated, leading to a lower PNUE. Optimizing the amount and activity of Rubisco relative to nitrogen availability is a target for improving crop NUE. Photorespiration and Nitrogen Metabolism: Nitrogen metabolism is also linked to the photorespiration pathway (which competes with carboxylation at the Rubisco active site), particularly in the reassimilation of ammonia released during the process. To increase RuBisCO regeneration, which refers to the process of forming the CO2 acceptor molecule Ribulose-1,5-bisphosphate (RuBP) during photosynthesis, the primary methods involve optimizing the levels and activity of Rubisco activase (Rca) and enhancing the performance of other Calvin-Benson-Bassham (CBB) cycle enzymes. Biochemical and Environmental Approaches: Optimize Rubisco Activase (Rca) activity: Rca is a crucial chaperone protein that removes inhibitory sugar phosphates, such as CA1P (2-carboxy-D-arabinitol 1-phosphate), from the Rubisco active site, thus maintaining its catalytic competence. •Ensure optimal light conditions: Rca is light-activated via the chloroplast's redox status. Adequate light intensity ensures Rca can effectively maintain Rubisco in its active, carbamylated state. •Maintain optimal temperature: Rca is highly temperature-sensitive and can become unstable at moderately high temperatures (e.g., above 35°C/95F° in many C3 plants), which decreases its ability to activate Rubisco. Maintaining temperatures within the optimal range for a specific plant species is important. •Optimize Mg2+ concentration: Mg2+ is a key cofactor for both Rubisco carbamylation and Rca activity. In the light, Mg2+ concentration in the chloroplast stroma increases, promoting activation. •Manage ATP/ADP ratio: Rca activity depends on ATP hydrolysis and is inhibited by ADP. Conditions that maintain a high ATP/ADP ratio in the chloroplast stroma favor Rca activity. Enhance Calvin-Benson-Bassham (CBB) cycle enzyme activity: The overall rate of RuBP regeneration can be limited by other enzymes in the cycle. •Increase SBPase activity: Sedoheptulose-1,7-bisphosphatase (SBPase) is a key regulatory enzyme in the regeneration pathway, and increasing its activity can enhance RuBP regeneration and overall photosynthesis. •Optimize other enzymes: Overexpression of other CBB cycle enzymes such as fructose-1,6-bisphosphate aldolase (FBA) and triose phosphate isomerase (TPI) can also help to balance the metabolic flux and improve RuBP regeneration capacity. Magnesium ions, Mg2+, are specifically required for Rubisco activation because the cation plays a critical structural and chemical role in forming the active site: A specific lysine residue in the active site must be carbamylated by a CO2 molecule to activate the enzyme. The resulting negatively charged carbamyl group then facilitates the binding of the positively charged Mg2+ion. While other divalent metal ions like Mn2+ can bind to Rubisco, they alter the enzyme's substrate specificity and lead to dramatically lower activity or a higher rate of the non-productive oxygenation reaction compared to Mg2+, making them biologically unfavorable in the context of efficient carbon fixation. The concentration of Mg2+ in the chloroplast stroma naturally increases in the light due to ion potential balancing during ATP synthesis, providing a physiological mechanism to ensure the enzyme is activated when photosynthesis is possible. At the center of the porphyrin ring, nestled within its nitrogen atoms, is a Magnesium ion (Mg2+). This magnesium ion is crucial for the function of chlorophyll, and without it, the pigment cannot effectively capture and transfer light energy. Mg acts as a cofactor: Mg2+ binds to Rubisco after an activator CO2 molecule, forming a catalytically competent complex (Enzyme-CO2-Mg2+). High light + CO2) increases demand: Under high light (60 DLI is a very high intensity, potentially saturating) and high CO2, the plant's capacity for photosynthesis is high, and thus the demand for activated Rubisco and the necessary Mg2+ cofactor increases. Mg deficiency becomes limiting: If Mg2+ is deficient under these conditions, the higher levels of Rubisco and Rubisco activase produced cannot be fully activated, leading to lower photosynthetic rates and potential photo-oxidative damage. Optimal range: Studies show that adequate Mg2+ application can enhance Rubisco activation and stabilize net photosynthetic rates under stress conditions, but the required concentration is specific to the experimental setup. Monitoring is key: The most effective approach in a controlled environment is to monitor the plant's physiological responses e.g., leaf Mg2+ concentration, photosynthetic rate, Rubisco activation state, and adjust the nutrient solution/fertilizer to maintain adequate levels, rather than supplementing a fixed "extra" amount. In practice, this means ensuring that Mg2+ is not a limiting factor in the plant's standard nutrient solution when pushing the limits with high light and CO2. Applying Mg2+ through foliar spray is beneficial to Rubisco regeneration, particularly in alleviating the negative effects of magnesium (Mg) deficiency and high-temperature stress (HTS). While Mg can be leached from soil, within the plant it is considered a mobile nutrient, particularly in the phloem. Foliar-applied Mg is quickly absorbed by the leaves and can be translocate to other plant parts, including new growth and sink organs. Foliar application of: NATURES VERY OWN MgSO4 @ 15.0g L-1 in a spray bottle. Foliar sprays are often recommended as a rapid rescue measure for existing deficiencies or as a supplement during critical growth stages, when demand for Mg is high. Application in the early morning or late evening can improve absorption and prevent leaf burn. The starting point [of creativity] is curiosity: pondering why the default exists in the first place. We’re driven to question defaults when we experience vuja de, the opposite of déjà vu. Déjà vu occurs when we encounter something new, but it feels as if we’ve seen it before. Vuja de is the reverse—we face something familiar, but we see it with a fresh perspective that enables us to gain new insights into old problems. Come walk in the enchanted forest.
Likes
10
Share
Diese Woche ist die letzte Vegi Wochwe, denn jetzt geht es in die Blüte. Die Pflanze ist weit gjut gewachsen und die Löcher, die der abgebrochene Trieb verursacht hat, sind nahezu dicht. Die ganze Vegi Phase hägtte ohne diese Rückschläge 2 Wochen kürzer sein können. Näheres dazu in meinen Vegi Woche 7 Video auf Youtube: https://youtu.be/iN1EFI8zq6s Link zur Lampe (Mars Hydro FC3000-Evo: https://marshydro.eu/products/mars-hydro-smart-fc-3000-evo/?ref=docgreenthumb Gutscheincode für Mars Hydro (3% Rabatt): docgreenthumb
Likes
10
Share
@nonick123
Follow
Día 35 (10/06) N/A Día 36 (11/06) Se va a quedar un pequeño gran cogollo porque ya se ha detenido el strecht Día 37 (12/06) N/A Día 38 (13/06) Avanza la floración para estas pequeñas Día 39 (14/06) Riego 150 ml de H20 pH 6,5 Día 40 (15/06) N/A Día 41 (16/06) 500 ml de Té de Floración con Healthy Harvest 8 ml/L + Insect Frass 16 ml/L + Melaza 1 ml/L 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
7
Share
Likes
2
Share
Week 4 flower she is looking good, haven't been doing alot just full reservoir when empty thats all.
Likes
109
Share
-Flowering is going well. Gunna try and test the ph of the runoff this week to see if I have an issue. -BC1 has some yellowing leaves near the top of the plant. -WW1 (the bushy plant) has had 2 major haircuts this week. I’m having a really weird issue with some upper leaves turning red! They’re turning red, not dying or falling off just turning red, it’s weird and only happening to this plant. -WW2 and BC2 are doing amazing! Pretty much all green except for the occasional old yellowing leaf -Time to pack on some weight -Midget has started to flower, doubt it will be ready before the cold, we’ll see what happens
Likes
61
Share
@Grey_Wolf
Follow
Sensi Seeds JACK HERER 31st December 2019 It's the Last day of the year and the little Jack Herer has a brand new home along with my other Photoperiod Plants. I erected a 3m x 2m x 1.8m Green House That completely covers the whole area. This Green house will serve a few purposes such as protection from any Rain during Flowering, Prying Eyes and Potential animal interference. Ive topped her now at the 5th node and other than that she's been left to her own devices to grow and thrive as she wishes. Speaking of wishes,,,, I would like to wish you all a very Happy New Year and I will be back Next Week for another Update. ***** The Video is of a visit from some Wild Red Tailed Black Cockatoos *******
Likes
4
Share
Who knew managing 3 phenos would be this hard! Lol CSK 1 (Far left) - This plant was doing fine until I checked the PPM and it was at 2300 😳 - I’m going to skip nutes for 1 week to see if it drops. CSK 2 (Middle) - This plant has the slowest uptake of all three plants! However, I did test its PPM at 1900. I will skip nutes for 1 week and see if it drops. CSK 3 (Far Right) - This plant is the second fastest uptake and was tested at 980 PPM so this is a fairly hungry plant. I noticed the leaves on this plant appears yellow. I suspect this might be Nitrogen + Potassium deficiency. I will only water this plant with those specific nutrients this week at a low dose. Additional, I added another 3k LED for supplement lighting. Tested the PPD and lowered the light intensity. To minimize the loss in heat, I increased the height of the LED lights.