🎩🌈🍬

######################################### HARVEST (Day 110 / December 21) ######################################### ----------------------------------------------------------- GROW SUMMARY ----------------------------------------------------------- Grown in 4x4 tent - but I only used 2x4 because of heater and dehumidification but each plant averaged a 2x3 canopy. Each plant had a dedicated light, Sage 2 used the HLG 300 V2 Rspec and Sage 3 used the CMH 315. It's not an accurate comparison of lights because there was some overlap but I'm just utilizing my resources the best I can for this dedicated autoflower tent. The plants were grown in hydroponics using a custom two-site PA hydroponics clone RDWC system with Advanced Nutrients Sensi Coco line, Microbial Mass and Orca for beneficials. All around a pretty easy grow and things went very well. Sage #3 had an issue just after stretch, and I think I burnt it a bit when the CMH was at 22". I also experimented with a single water change which was only performed when switching to bloom nutrients around week 7 and turned out surprisingly well - see the results below. It's always fun to see the two contrasting phenotypes side by side. ----------------------------------------------------------- HARVEST ----------------------------------------------------------- From day 106 to day 110, I just stopped feeding and let the ppms run down. No dark period and no flush. On day 110 they were chopped. I probably could have let them go a bit longer, but my concerns were growing with Sage 3 and the sugar leaves being brittle and flacking off onto lower buds promoting bud rot. The smell of this flower on the plant was funk and was hard to control the funk... even with a carbon filter. Trichomes are slightly amber, mostly milky overall. I'm convinced hydroponics can add a couple of weeks of veg time to the run compared to coco/soil. Cutting the Scrog net was required. ----------------------------------------------------------- DRYING ----------------------------------------------------------- The plants were dried in a 3x3 tent, so I had to cut the plants in 1/4 sections to fit in the 3x3 drying tent for a slow dry. Branches were hung to dry on burlap twine in a tent in complete darkness, branches upside down. The temps were dialed in at 60F by pointing AC at the intake vent on side of the tent. Humidity was dialed in at 63%/60F for 24hr, 62%/60F for the next 48hr. Then 60%/60F for the third day and onward. Ambient RH in my house is 30% due to winter so I had to use two humidifiers and an Inkbird controller to add humidity to the room and block the humidity streams from hitting plants directly. AC Infinity T6/S6 exhaust and intake fans were on the setting of '2' during drying until day 8, then I could turn down to a setting of '1' once the plants were not transpiring excess moisture. I pulled the branches to trim as they were ready around starting around day 12. ----------------------------------------------------------- TRIMMING ----------------------------------------------------------- I trimmed each branch as it was ready but there were times when I pulled more than I could trim without being interrupted so a few branches did overdry on my trim table due to the low ambient RH due to winter. Very few fan leaves on branches, so most trim was all sugar leaves. I went tight with trim to ensure a better flower product and more supply for edible totaling in over 11 ounces of trim product. ----------------------------------------------------------- CURING ----------------------------------------------------------- Flower product was transferred to 1L mason jars averaging 35g of product per jar. I added a mini hygrometer to each jar and boveda/boost 8gr humidity pack. The RH averaged 62-64% when trimmed flowers went in jars. I started by burping once a day for the first seven days, once every other day for the next seven days, rolling jars often. The burp was only for 3-5 second for air exchange. Because the flower product was already at almost 62% when packaged in jars, quite the contrast from drying in summer conditions, I only needed to burp once per day and mold really wasn't much of an issue due to low humidity in winter. ----------------------------------------------------------- YIELD ----------------------------------------------------------- * Weight calculated at 62% humidity after 10 day cure. ============================== FLOWER PRODUCT ============================== Sage 2: 301g (10.75oz) Sage 3: 377g (13.46oz) ---------------------------------------- Total: 670g (23.93oz) ============================== TRIM PRODUCT ============================== Sage 2: 204g Sage 3: 135g ---------------------------------------- Total: 327g (11.67oz) **I went tight on the trim for better flower product and sufficient supply for edibles, and is calculated in overall yield. ** All major fan leaves, stems, and branches removed from trim product. ============================== TOTAL OVERALL YIELD ============================== Flower: 678g (24.21oz) Trim: 327g (11.68oz) ---------------------------------------- Total: 1005g (35.89oz) (2.24lb) ============================== SPACE YIELD ============================== 1005g / 12 sqft (3x4 canopy) = 83.75g per sqft ============================== WATTAGE YIELD ============================== 615 Watts / 12 Square Foot (3x4 canopy) = 51.25 watts per sqft. 1005g / 615 watts = 1.63 grams per watt ----------------------------------------------------------- PRODUCT TEST ----------------------------------------------------------- On day 10 of cure, I tested the flower and passed some to a few friends for their input. Feedback was positive. One little bud was given to a friend and he reported it stunk his entire car. Sticky, trichome-covered fire! Smoke is smooth, no cough. White ash. The 60/40 (sativa/indica) is a blend that is on point. Sage Scout definitely is a heavy hitter; upwards of 3.5 hour noticeable head/body change with no couchlock at the end. In regards to flavor and smell, it's not fully there yet on only day 10 of cure. The flavors/scents are still muted but I expect the flavours to prevail after 6-8 weeks of curing. Very funky and strong smell that bursts past the mason jar lids. Piney sweet scent. ----------------------------------------------------------- REGRETS ----------------------------------------------------------- Honestly, I only have two regrets with this run. 1. More aggressive lolipopping! I just feel if I had lolipopped more, I would have had a denser product overall. The flower product is indeed dense, and all in all, I'm happy with the result, but it's I'm adding as a reminder for the next run. I need to be more selective. 2. I slacked on the training of Sage #2 due to the hard-to-reach factor which probably affected about additional 1-2 oz of yield. ----------------------------------------------------------- NEXT RUN ----------------------------------------------------------- 1. I’m was very happy with Microbial Mass product in combination with Orca. Once again, I was overall happy with Advanced Coco blend for RWDC. I went with Coco product because Coco is similar to hydroponics, the AN Coco line just has added Calmag to it. I didn’t really see any issues with the AN Coco line and I like the autonomous factor of AN sensi products because my photoperiod tent takes some of my attention, so it is nice to have this autolower tent on auto-pilot for the majority of the grow. 2. When harvesting, I did find a few spots of concern in the root system, so I will definitely upgrade the pump from 250gph to a 400gph for better flow to combat that issue. 3. My experiment with a single water change when switching to bloom nutrients was a surprising result. Sage 2 (purple pheno) performed well with no deficiencies which I had trouble sorting out the deficiency on Sage 3. I continue to wonder if it was salt build-up, but it seemed to start shortly after the change to bloom nutrients so maybe it was a nitrogen/calmag issue. I may add an additional water change mid-flower (week 11) to the next run and see if it makes any difference is the same conditions happen. 4. I'll also like to move the two-site system to the front of the tent for better accessibility to train the plants. 5. I'm also looking at the floorplan of the tent and I think I can run a single system in parallel next to this two-site system and still have room for heater/dehumidifier and still keep accessibility for training. ----------------------------------------------------------- FINAL THOUGHTS ----------------------------------------------------------- Night Owl genetics has performed once again in my RDWC setup. I also feel a dedicated light for each plant really helped improve the yield. If I calculate a 2x3 space for each plant, with a total of 615 watts / 12 sq ft, running at 51.25 watts per square foot is the result. In regards to gram per watt, I've calculated the result is nearly 1.63 gram per watt when using 1005g / 615 watts. My goal was a pound per plant, I was happy to exceed that goal line with autoflowers with 2.24lb total yield. ----------------------------------------------------------- THE END ----------------------------------------------------------- Thanks for checking out my diary! I typically journal in my notebook but I put some time and effort into documenting my grows on this platform in hopes it will help a new or experienced grower with their DWC journey. Any questions or suggestions are welcomed. Happy growing!

Video clip of daytime grow spot and afternoon sundown chill spot

Another week they are looking good . My ak47 just got some mold on the top so I already loose one top but let’s keep forward.my gorilla is showing some nice purple buds..

Excited to finally have the baby cut down and now letting her dry out! Wet trimmed some pieces but then leaving rest to do dry. I am excited to share future grows00

Seems like ss is bushiest top right shortest. Hindsight bottom right. GS Top left. Update 3 days later hittem all with light mist of MLE.

Blüten werden inzwischen sehr Harzig und der Duft nimmt zu. Dem Giesswasser wird täglich 1:10 Jauche zugegen. Zu dem jedes zweite Gießen Pro Sugar von Grow Pro ein Kohlenhydrat Blütedünger(von der Mary Jane ein Tester). Zu dem gibt es ein bis zweimal in der Woche Seafeed Xtra von envii. Die ersten Blätter haben sich unten entfernt daher gebe ich gerade wieder Stickstoff zu den Pflanzen. Auch wenn es nur noch diese Woche war danach nur noch Blütedünger. Zu dem habe ich Basilikum gepflanzt, Dill, Ringelblume und Koriander gesäat am Anfang der Woche und zum Ende noch Lupine und Rot Klee.

Hello guys ! new week and an amazing week ! Told you she was working on her buds and now you can see all of them. It's the perfect moment for a small defoliation in order to increase the focus of the buds. You can see the videos Before and After. I will have to add bamboo stick because the buds are starting to be too heavy ! she is gonna start to show her colors next week I think. Hope you enjoy Take care Sawyer

She's starting to smell real nice :)

All goes well I guess.. I don't think there will be time for her to finish.. 6 weeks more at least and nights getting colder... Can't do much but wait. She grows she stinks.. really stinks.. That's all really. Thanks for stopping by Stay safe 😷😷 Grow well 🌿🌱🌼

Defoliation at week 4

Buona settimana

Buds are sweling nicely.last time that i give them bat guano.growers looks my pictures and video and say something obout my grow.tnx.nic3 green day to all.peace

Inicio de Floración 💐 😍🍀💫

Hello. This is the end of the veg cycle and the first week in flowering. It's May 30/2023. The Breeders Description said 8 to 9 weeks of flowering. That should take us to August 1st. That would be the start of week 9 and Aug. 8th would be the end of week 9, so I plan to harvest around then. The greenhouse looks a little different than last time. My buddy Jerry brought me some bamboo (he went out of his way on his birthday to do that for me) What A nice guy he is. I used 18 of the longest pieces to make a Scrog type of net to hold up the big buds I hope to get. First year to try this bamboo thing. Hope it goes good. I might have to tie it up tighter. I did a good trim/prune, under the table mostly, but did remove some big fanleaves up top that blocked the lower branch ends/tips from seeing good light. I think it's also good to remove the big fanleaves that don't get much light any more. It promotes more growth up top. While trimming I left the branches that were growing straight down. I'll trim them off today for cuttings, for clones I'll make later. I mix 10ml of liquid seaweed with 1 gallon of water to put the cuttings in. I'll make 6 cups for 6 different plants numbered 1 to 6 so I don't mix them up. 😁 I'll pack up the lights later. I'll mix some transition to flowering, nutrient solution tomorrow. That means a little less N and a little more P and K. Thanks for looking in. Chuck.

They are getting nice and stretchy. Can see some interesting growth traits between then all. Tent is a bit to crowded for my linking but they are 8 plants crammed into a 2x4 so don't know what I was expecting. They are doing well and next week I will be getting a buddy to take care of them so curious to see how they look when I get back. Made it stupid simple and feed them a bit more this week in hopes the remainder will carry on over to next week and be fine. Might also mix a bit of amendments into the stop layer so it just gets a bit more into it. nothing else to report. Temps and RH are doing well with the extractor. Place has been kinda dry so its working in the tents benefit. noticed some calcium like issues on one lead and found it odd as I amended a good amount of Ca into the soil and its only on one of the leaves. Might just be something else but something to think about while I am gone. Will get my friend to send me some pics of everything to make sure its going well. I also noticed the PH of the feed I give is around 5.1 for whatever reason it is quite acidic but does not seem to bother the plants to much. I know if I fed that kinda thing before I would have ran into issues. *Small Update, I top dressed with a bit of Gaia Green Power Bloom 2-8-4 "found a small amount in an old bucket" and some super fly insect frass of 3-2-4 and a bit of rock dust for extra Ca and some micros. I mixed all this stuff up and gave each bucket a heaping 1tsp/5ml of the powder mix. Normally the recommended dose is 1Tbsp/15ml per Gal. and the container are 2Gal. so its getting a very light dose. This will hold it over with everything else that's in the medium. Till next next week.

Still only just watering 200mls every second day, she's got a got nice purple stem, looks like it picked up some of the black dominas colours.