Check the winners The Grow Awards 2026 🏆
Likes
Comments
Share
Flowering day 76 since time switch to 12/12 h. Hey guys :-) Finally the time has come . The lady was harvested and hung upside down in the dry tent 😍. Before that, she stood in the drying tent in complete darkness for 2 days and the large leaves were removed. The small leaves stay attached during the drying process so that they protect the buds and allow them to dry more slowly and evenly :-) . In the dry tent, the temperature is 18-19.5 degrees and the humidity is 54-58% 👍. In this environment they are now allowed to hang for 10-14 days before they are fine-tuned and trimmed clean by hand. then after trimming they come to ferment for 6-12 weeks in dark jars with bobeda packs 62% to keep the perfect humidity. After a few weeks, the Boveda packs 58% are used so that they can slowly dry out :-) . Of course there is one last update after trimming. Until then, I wish you a lot of fun with the update. Stay healthy and let it grow 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Likes
59
Share
To start the week I spread the ladies out taking advantage of the full room and added another light to hit the far side of room. Now room has viparspectra 600w and kind xl 1000. Room is 6'x4'. End of week 8 and they just keep stretching! 12" in 7 days buds are starting to form and lots of bud sites!
Likes
167
Share
@PapaNugs
Follow
Everything is well with this grow. She continues to swell and fatten up. Super excited for the final product as she is starting to smell better and better. Watering every day and adding water to the self watering pots. She drinks a ton! Like an alcoholic At 100% power Here are the lights details: Medic Grow Mini Sun-2 150W LED Model: MN150-022 Spectrum mode: V1 Efficacy: 2.8 umol/J Thanks for stopping by! You can find the light on Grow Diaries: https://growdiaries.com/grow-lights/medic-grow/mini-sun-2-150-watts You can find the light on Medic Grow's website: https://medicgrow.com/
Likes
84
Share
@Terp1
Follow
08.06.2023 Tag 34 - die Woche regnet es nur und ich habe Probleme die RH zu halten. 65-70% erreicht sie durchschnittlich gerade. - an #2 teste ich agressive Entlaubung "bud focused defoliation" -> bin auf das Ergebnis sehr gespannt 09.06.2023 Tag 35 - Luftfeuchtigkeit bei 65% @ 27°C -> passt eigentlich im VPD und die Pflanze fängt ja gerade erst an zu blühen - Morgen ist Blütewoche 1 <3 - aus dem Dreieck ist irgendwie nix geworden aber ich lass die sich erstmal strecken
Likes
223
Share
💩Holy Crap We Are Back At It And Loving It💩 👉WE R SO CLOSE NOW👈 Growmies we are at DAY 77 and there all just killing💀it👌 The Gorilla Punch Is Amazing 👏 An has been chopped 👈 👉We will be chopping the OG Kush this weekend 👍the Afghan kush still requires more time 👈 So Shit , I gave them just a tad to much nutes at the start feeding 👈 But I have since fixed it So I'm still doing some low stress training 🙃 and some defolation 😳 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈
Likes
Comments
Share
Likes
16
Share
@BLAZED
Follow
Germination (4-6 to 16-6) Melonade Runtz Feminized - Dutch Passion. Genetics: Melonade (Lemon Z x Lemon Tree) x Runtz. 20-25% THC, 50% Indica, 50% Sativa. Flowering time: 9-10 weeks. Aroma and Flavor: Pungent, lemon and tropical fruits with creamy, pastry-like notes. Effects: Powerful, euphoric high with a strong narcotic-like effect, suitable for experienced users. 4-6 Today i put the seed into a wet coffee filter to germinate. 6-6 After 48 i checked on the seed and the root grew really long! A bit longer to my liking so i should have checked sooner. I put the seed in a 0.5L pot filled with some Plagron Lightmix, it stays in the dark till she is above the ground. I made a feed with 0.5 gr Calcium and 0.2 ml Rootstimulator per liter. EC: 0.4 PH: 5.8, and watered the pot a bit. 7-6 After 24 hours she is above the ground and i removed the plastic foil covering the pot. 8-6 Temperature: 19.5 to 24.1 degrees Humidity: 41% to 70% Watering: 20 ml. 9-6 Temperature: 18.8 to 23.4 degrees Humidity: 62% to 74% 10-6 Temperature: 19.4 to 23.9 degrees Humidity: 60% to 74% 11-6 Temperature: 19.4 to 25.2 degrees Humidity: 43% to 71% Watering: 25 ml. 12-6 Temperature: 21.2 to 25.4 degrees Humidity: 44% to 60% 13-6 Temperature: 22.2 to 25.9 degrees Humidity: 44% to 71% Watering: 15 ml. 14-6 Watering: 40 ml. A week later and today is the last day of the germination phase. She is a bit of a stretcher, as she is growing taller then the other plants in the pre-grow cabin.
Likes
46
Share
@Dreadnug
Follow
Added a top layer of soil with added nutes so that only needed to water normally and let the top mix do the work down below. Will mix in more compost tea every other day and towards the end of the week, hit it with my normal organic nutes mix. The plant is looking healthy and continues to flower out and each cola is starting to thicken nicely. I have a few leaves here and there showing some discoloration so will watch closely to ensure I don’t have a light or nute issue. Will move the light intensity to 80% on the LED panels after this next week and as long as the leaves still look good. The grow room is fairly warm (80F) and rH is high (75 – 80rH) but my CO2 levels are fairly high as well so the plants should be fine. Running 2 x HO Solarcure UVBs for 2 hours about an hour after the LED lights turn on at the beginning of the 12 hour set and for 2 hours about an hour before the LEDs turn off at the end of the set. Plant #1 – Really starting to get colorful, very purple and frosty. Sorry for all of the bud shots but can’t help it! Super excited to see how she starts to fill out.
Likes
3
Share
@Luv2Grow
Follow
Day 91 - Started week 14 off with 2 gallons of plain pH’d water. It’s looking like this will probably be her final week and she’ll get the chop this coming weekend. I’m still thinking I’m not going to do a full harvest, I’ll chop the main buds and such and see if I can get the lower popcorn shit to fatten up. This is one of the best plants I’ve grown to date and want to maximize as much of her as I can. Day 92 - She’s getting really close now, I can almost taste her. Thinking about chopping most of here either Friday or Saturday. Buds are nice and dense and wanna get the lower popcorn to fill in after chopping the main colas. Not seeing much for amber trichs but there’s a few in there and she’s all cloudy other than that. Day 93 - Gave her 2 more gallons of plain water today and that will probably be it. She will be getting chopped this weekend and gonna let her dry completely up before cutting. Starting to show quite a bit of amber trichs so she’s ready, just holding out till Friday.
Processing
Likes
8
Share
@Max1973
Follow
Day 8 - Decided to put em in a diy dwc hydro setup till oxypots arrive.... initially was planning on soil pots and the roots are coming out the sides of the jiffy pots... so, 2L ice cream container, mix up 6.2 ph 500 ppm solution, cut a few jiffy sized holes .... blow bubbles in the water afew times a day.... lol Using abit of old Dutch Master Gold One Grow atm.... and i'll look at using some Nutrified elements grow, Crystalic, rock nitro, dutch master gold one grow/flower.... :) ice cream containers worked out perfect for jiffy... ....perfect for the seedling stage.... baby dwc for baby seedlings.... also gave me a chance to test out dwc....... i'll build this as i go... going to be a interesting grow for me.... 😎
Likes
2
Share
Looks like this might be the last week for this girl. Was hoping to see more change in tricomes but not sure if worth the wait. Give it a few more days and see what the loop says.
Likes
9
Share
The stretch continues...It appears buds are setting and forming up quite nicely. I couldn't take watching the side with the vivosun bulb keep lagging behind more and more from the hortilux side, so I switched the bulb out. And within 3 days the jump in plant size was huge. The aroma is getting slightly stronger by the day. This is the last week with the early bud booster in the system. I have been putting the next weeks nutrient solution in my top off tank to steer the nutrients. It seems to work great!
Likes
17
Share
@Naujas
Follow
it's amazing, this growth looks much better than my first attempt, my decision was to put a smaller pot and change the light - the girl really liked it, FastBuds goriilla cookies with a small space manage perfectly:).
Processing
Likes
24
Share
9/2 allowin showing colors finally, getting purple I some fanleaves, she's smelling super sweet like berries 9/4 she's getting so so frosty. Shes growing/budding like a typical sativa. Super Long slender nugs with ridiculous amounts of frost/crystals covering all surrounding sugar leaf. Yet still small and slender actual bud formation. I am very impressed by the resin production so far though. (Sativas always look Impressive(crystals) but lack actual bud structure) Watered and introduced beastie bloomz to the mix instead of open sesame. Hoping to pack on extra weight. On a side note: the clone from this plant is flowering as well. I have limited the addition of most nutrients besides what was already in the soil. Its cool to note that the clone that hasnt been fed flowering nutes like the mother plant has, is lacking in smell, color and resin production, in comparison between feeding with open sesame vs not feeding besides water as needed. Its not surprising but i love seeing the proof
Likes
21
Share
Super happy with everything so far, plants are growing fast and everything is going smoothly. I have all propped up a couple inches for better light penetration. Gonna need to take the humidifier out here soon so I can maximize all of the space for the plants. Haven't done any cutting, just some LST.
Likes
22
Share
7/1/23 - Day 19 I do water changes weekly. The new weeks start off with a water change. Water changes always scare me, it's the mixing of nutes and balancing the PH. It sounds easy in theory but in practice you want to interfere with the PH asap. But I was able to let the LEAF box empty the water, I filled it up with RO water, LEAF then dosed all my nutes. After that i came in a PH balanced it. (PH balance is something LEAF will be able to do, but there was a bug in the software so instead of having LEAF dose the PH i decided to do it manually for now. The Roots are INSANE! I bet by time I'm done there will be 1+ gallons of water displaced by the roots. I almost started cutting her lower leaves at the base, but I decided to let them grow for a bit. If they grow out some more i will be able to scrogg them and then cut the leaves below after they are trained up a bit. The lights have kicked on and everything looks in order. The plant looks great too, she might be in a small amount of WTF because of all the PH changes but i think the drastic changes were kept to a minimum. She looks happy. As always ill update you tomorrow. 7/3/23 - Day 21- I trimmed some of the lower leaves on the bottom, I'm leaving her bushy still, I won't want to cut any more branches if I can, I need the branches from the bottom to reach the sides of the Scrogg net. In the next couple of days being apple to Scrogg and stretch her while Shes still moldable. 7/5/23 - Day 23 - I added some training lines to some of the branches. I need them to be as spread out as possible going into the Scrogg net. I'm a big fan of not trimming too much as she grows. I don't mind there being some foliage down below. I will cut as needed if it looks like the lower areas are sprouting too much of the little leaves, but for the most part, I let nature do its thing. She's drinking a ton of water now. I am getting my RO water dropped off by the five gal loads. I just got the membrane for my RO150 unit that I plan on having up and running within a couple of weeks so I can start making my own water. 7/6/23 - Day 24 - I added a picture of my RO water setup. It cannot be set up permanently, so this was a great solution. You can see how I was able to tie my branches down, next time I will drill a few holes on the side of the pot. This is a great solution for anyone looking to Scrogg and manage the vertical height. Also, you can see on the top branch there was some pulling, so much so that it started to pull the plant and it created a small lump. All good but just goes to show how pliable these plants are. Looking good and I'm excited for the next couple of weeks! If you are looking for this experience check out https://www.getleaf.co/
Likes
39
Share
Las altas temperaturas han persistido es por esto que el riego ha sido más seguido variando siempre entre fertilizante y agua. Esta vez ya se utilizó Flawless Finish para este último proceso, una vez secándose el sustrato se comienza con la cosecha. Ha sido un buen cultivo. Veremos como termina esto. Seguimos ! 👽💪
Processing
Likes
4
Share
@SakuraAsa
Follow
7/20 #1 and #2 are wild grown, so they are surrounded by enemies. #1 Day70 @Out 10Week  #2 Day65 @Out 10Week  8/4 #3 Day69 12/12 Flowering / 5Week  short-day processing Day30 BioGrow1ml/l,Bloom3ml/l,Max1ml/l = 3l Next watering 3l #4 Day66 12/12 Flowering / 5Week  short-day processing Day30 BioGrow1ml/l,Bloom3ml/l,Max1ml/l = 3l Next watering 3l #Clone Day15 Light Schedule 18/6 8/5 Carbon filter installation