Likes
Comments
Share
@DonPeyote
Follow
Algunas colas tuvieron que ser amarradas para que no cedan por el peso, comienza el engorde con altas expectativas de esta cepa... Ya veremos si la repetimos
Processing
Likes
5
Share
Son fotos y videos de múltiples cultivos debido a que nunca e realizado un seguimiento como tal, espero realizar uno ahora! Nutrientes Utilizados en general Trybac y Trypack biobizz. Las criticas siempre serán bien recibidas!😋 Espero les guste el contenido!
Likes
20
Share
Strawberry Pie Autoflower (FastBuds) Solo Cup Grow HARVEST This was a solo cup run so that affected the growth and yield more than the genetics. She did not branch and she pre-flowered early. In the end she was full of trichomes and buds were dense and terpene ritch. Was a bit slow getting in this harvest post and I did sample.. well.. most of it already and the smoke is sweet and flavorable. I would grow Strawberry Pie again, in a proper sized pot, if I had more seeds.
Likes
Comments
Share
@Dirizhor
Follow
Hi, exciting times, flowering, see some stratching, but not too much. Plant now drinks 2 liters a time, each 2 days. Befor I was giving 1 liter every 3 days. So water cosumption encreased more then 3 times. Smell is not strong yet, as expected. Not much really I need to do escept mixing fertilizer and water the plant.
Likes
18
Share
@Budhunter
Follow
Week 8 of flowering, Biscotti mints 2 looks more close to the end than Biscotti mints 1. Both very frosty, smelling really good. It’s been 1 week since I flushed them 😍 Looking at the trichomes they are close to the stage I like(around 20-30% amber) so I will harvest them.. probably 1 more week. Overall really happy with what I am seeing 🤩 can’t wait to smoke it 🤪
Likes
1
Share
@Gratak
Follow
Leider habe ich von diesem Grow nur die Bilder Kurz vor der ernte aber ums mal kurz zusammen zu fassen: Ich habe die komplette Plagron Dünger Linie benutzt und bin damit auch sehr gut gefahren. SANlight: Zur Anzucht auf 30% Zum Start der Blüte 60% Wochen Später auf 80% Ab Woche 7 dann 100% Der Grow verlief reibungslos wie immer bei 420 Fastbud, da ich aber viel geschäftlich unterwegs war konnte ich den Dünger nicht ganz auf die Bedürfnisse anpassen. Ich denke beim nächsten Versuch kann ich das Ergebnis noch mehr optimieren, obwohl ich schon extrem zufrieden bin was Qualität und Quantität angeht.
Likes
Comments
Share
Esta semana se hiso poda de ramas bajas y una pequeña desfoleacion a los 16 clones,y se comenzo a alimentar con alga bloom mas power roots aun.
Likes
44
Share
@Roberts
Follow
Casey's Rollex OG has a sweet fruity aroma. She is loaded with frost. She is in the mist of her bulking. Everything is looking good. A few more weeks left and she will be ready for a harvest. Thank you DutchFem Seeds, and Spider Farmer. 🤜🏻🤛🏻🌱❄️ Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. Thank you Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
2
Share
Likes
35
Share
@ReinDeer
Follow
I started the week with watering the plants, new buds are developing nicely and they’ve got some mass since last week. I am a little worried for the plants at the edges of a groow room beacuse tey are still small and not as bushy as I hoped they would be. Day two: Yesterday’s nut feed turns out to put extra fuel to the plants and buds grew in size significantly:) upper leaves got a little purplish color which looks amazing but I hope it is not some kind of deficiency 🤘 Day three: I thought centered plants were too near to the light source so I bended every plant in a way so the light would be evenly exposed to the whole growing area and I am happy with the results so far. Hopefully it will have a final effect for the harvest quantity😺💪
Likes
32
Share
Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Harvest day 70 since the time change to 12/12 hrs. Hey guys :-) Finally the time has come . The lady was harvested. After the trichomes have been checked (70% milky 30% amber) as always, it was left in complete darkness for 48 hours before it was neatly trimmed by hand. After trimming, she was put back in the drying tent on nets. There they are allowed to dry for the next 8-12 days at 62% humidity before they are put into the jar to ferment with 62% boveda packs. After about 4-6 weeks in the jar I will swap the 62% boveda pack for a 58% boveda pack where it can be ready for another 4-6 weeks to enjoy :-). As always, the remains of the leaves are used to make Ice o Lator and oil. Of course, as always, there is a final update during the fermentation process. Until then, I wish you all a lot of fun with this update. Stay healthy 🙏🏻 and let it grow 👍. You can buy this Strain at : www.Zamnesia.com Type: Runtz ☝️🏼 Genetics: Zkittlez x Gelato 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡💡☝️🏼 Soil : Bio Bizz Coco ☝️🏼 Nutrients : Green House Seeds Company Powder Feeding Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8
Likes
30
Share
@GYOweed
Follow
Does it look like it's growing?😋 Counted veg week from surface.
Likes
18
Share
J’ai investi dans un système d’arrosage automatique Blumat avec 8 detecteurs Tropf. Fini l’arrosage, petite défoliation et c’est roue libre complète pendant un mois ! :) I invested in a Blumat watering system with 8 Tropf sensor. No more watering for me, one more defoliation and we’re set to go for the next month !
Likes
10
Share
Harvested the compton qoolaid at day 71 had about 25% amber and 70%milky had a wet weight of 440grams of flowers..cut light back a little bit was a little high evenbthough dli on paper was good. Day 73 on other girls and Mullberry is really fattening up on her flowers, and the blutane is full of dence huge flowers. Starting to fade a little gonna guess around 2 more weeks for both. Started to just give water this week. will include pics and final weight next week
Likes
30
Share
@Roberts
Follow
It updated. Finally. So a week ago this was a seed. She has sprouted and is getting acclimated. She looks good. I soaked the coco, and made sure ph is adjusted right. I then proceeded to add light feed of the plagron nutrition. Which will also help keep ph stable. So everything is looking good. Thank you plagron, Medic Grow, and Zamnesia seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
25
Share
@MaxMo8
Follow
I transfer to 3-gallon pot That makes me happy Happy roots happy fruits 😉
Likes
14
Share
@Theia
Follow
I’ve spent the last six days recalibrating my grow room. It feels more like a lab now because I am doing a lot of experiments with different variables and this week I have learned an awful lot. After pushing the environment to its absolute breaking point, I had to balance what my eyes were seeing against raw data to identify exactly where the Traffic Jam was occurring. I got so excited at the ability to control proteins in a plant with light spectrum I did the usual thing I do I drove them to their limits. Maximum photons (and beyond) in an environment where the plant just works like a suction funnel with a VPD of 1.6 kPa. What I forgot is that in my organic setup, the bottleneck is the speed the microbial life can create immobile nutrients. Under any normal conditions, the Biotabs 'just add water' method is more than capable of keeping up, but I had to be that guy and push them with 950 µmol of whites. By the time my Emerson burst came on, I was hitting them with around 1150 µmol, not counting the drain from the UV-B! This, on ambient, is just too much to ask; the plants used up all the calcium available, and my microbial life was unable to keep up. This is good to know, as if I wish to grow at this rate later, I will know what I need to add to facilitate that. I'm still blown away by spectral steering and the way proteins in a plant cell work. Grows are not normally still this fun at this stage. ________________________________________ 1. The "950 µmol" Mistake & Conclusion • The Error: I was running the main rig at 950 µmol, but with 4 strips of DRFR engaged, I was hitting a total ePAR of 1150 µmol. • The Failure: This intensity, paired with an aggressive 1.6 kPa VPD, outran the plant's metabolic capacity under ambient conditions. • The Result: 'Pistil Frizzle' on the crown of the Triple Cheese—the delicate stigmas literally toasted under the radiant load. 2. The Calcium Benchmark & The "Traffic Jam" • The Action: I noticed rusty, necrotic spots scattered across the leaf surfaces. • The Conclusion: The plants weren't 'low' on Calcium; the Biotabs microbial factory couldn't mine it fast enough to keep up with the 1150 µmol demand. I have officially flagged an image as my 'Calcium Benchmark' to track this in future runs. 3. The attempt to fix • The Adjustment: I have lowered the light ceiling to 800 µmol (targeting a DLI of 31–36) and stabilized VPD between 1.2 and 1.3 kPa. • The Rationale: This matches the 'spending' of the plant to the 'income' of my organic microbes, allowing the nutrient highway to move smoothly without crashing at the leaf tips. 4. Emergency Recovery: Bactrex & Bio PK • The Action: To clear the jam, I introduced a targeted top-feed of Bactrex and Bio PK to the Cheese. • The Goal: Boosting the microbial workforce and providing a direct PK source to support the Week 5 bulk while the Calcium delivery recovers. 5. Rhizosphere & Water Management • New decontamination for my 10L res refills: 10 drops of ExoThrive Neutralise, 5 minutes of violent blending, and an 8-hour air stone session • The Goal: To strip all residual chlorine and chloramines from my London tap water to protect my Bactrex and Mycotrex factory workers. • Future Intent: Researching the Water2 Pod 2.0 with a Fluoride filter to automate this and ensure consistent, medical-grade hydration. 6. Pot Size & Substrate Logic • The Constraint: Bigger pots are not happening • The Solution: To compensate for the smaller volume, I will increase Bactrex frequency and explore high concentrations of Gypsum (20g per 10L) in future mixes to increase mineral density without changing the footprint. Summary: I pushed for maximum push and hit a wall. By respecting the biological limits of a just add water system, I’m moving toward Environmental Harmony where every photon is used rather than wasted as a stressor. Been a great week for learning. Thanks for passing. Grow well ..