Likes
Comments
Share
@BlumenBot
Follow
2/28 - she got a feeding and I removed the shoots starting at each bottom node on every top. 6.0ph 3/3 - I took off the leaves that were at the nodes where I removed the shoots earlier this week. Now onto gaining height. Looking tight! 3/5 - Flush feeding
Likes
14
Share
This girl is growing good! No issues so far. I have had to defoliate a lot to keep the bud sites open to the light. She is really starting to flower up. Still growing taller.
Processing
Likes
17
Share
This week I have seen very big growth out of all my plants it’s very exciting I’m gonna grow some autos next 🤙 for 3/20 national auto flower day. Do y’all think these will be done by 4/20 probably not and hats okay don’t ever rush anything :)
Processing
Likes
6
Share
Some plants seem to be turning colors early. Pretty fast flowering varieties so not concerned. Covered in trichomes. It’s beginning to smell super fruity.
Likes
67
Share
Day 40: They got recoverd from overwatering. Leafs got darker because I gave them more nutrients, but gained early signs of slightly overfeeding ( Burnt tips on leafs). I had to boost them to fix it because there isn't much time with autoflowers. Now i only have to adjust my nutrient feeding with just 10 to 15% and its all good. They did stretch again, some growers love it but i think it is ugly and you will gain weak stems. Also the fans will not reach the plants properly, which is not good. This time it is my fault, i didnt want to let my friend take care of them while i was busy. What happend is that i could had raise my lamps again. When your lamps are to close to the plants( its not a big deal with LED but it is with HPS) your plants will get alot of heat and they will stretch. So the secret of smaller plants is to keep your lamps high, but not to high otherwise they don't grow proper. But never do this alot when they are in late flowering, because your buds will foxtail, unless you love to have foxtailed buds. I have to do something about the heat soon, because i want my buds compact and not fluffy. This will happen due lots of heat. Also due alot of stretching and other problems, I gained a messy cantopy resulting in many problems. For noobies the room looks awesome but pro's will see that because of this, the stems and branches are weak and everything beneeth it has no use anymore because it gets no light. The spaces between internodes are to far away, so there will not be huge buds. I also have to start give them cal/mag, i saw first stages of deficiency. Not a problem when you are early with spotting it. I didn't forsee that i had to work like 60hours a week suddenly while having autoflowers on cocos in 3 liter pots and you only can water them once per 2 days and can take care of them once per 3-4 days. That is not really ideal 😅 Positive thing is that the buds are starting to develope 😍 Thats all for now Day 42: I have been defoliating alot to get the air between the plants. There are still some leafs and branches i want to get rid off, but i don't want them to stress out to much. Also i have killed of 23 smaller plants to make more space for the others. This is always painfull but stupid if you don't do this. If the plants didn't stretch that far due heat and low placed lights, this would not have been the case. I would still have alot of small nice plants. See you guys next week!
Likes
1
Share
The stretching phase has been progressing nicely - It’s a bit hard to see due to the low stress training, but growth is steady. The middle plant is a bit ahead in terms of development, though it should even out with the others over time. I’ve been dealing with a heatwave this past week, with temps in the grow environment peaking at 34°C. To combat this, I increased airflow with an additional fan and opened the tent flaps. Temperature is now back down to around 28°C, but the downside is that humidity dropped to 50–60%, which isn’t ideal for this early stage. Still, we push on! --- Quick rundown on everything else: Watering: 1500ml every third day Fertilizer: According to the BioBizz schedule Light intensity: ~1000 PPFD VPD: Around 1.54 kPa Temperature: ~28°C Relative humidity: ~55%
Likes
22
Share
I think I planted a little early as the tap root was only just about 1/4 of an inch. I have my lights and fans on to test my environment but I don’t think they’re needed until some green growth appears. The Great White Mycorrhizae I am hoping will help with root growth in the early stages of vegetation.
Likes
2
Share
@PalmaGrow
Follow
Hermosa floración mucha resina Defoliación para permitir mejor ingreso de luz 25 - 31 agosto
Likes
21
Share
What’s going on lady’s an gentleman. we got the Moab strains going on W/1 in living soil. They where planted into the root riot cube an treated with neem oil to kill off the fungus gnats, they are thriving now. An getting bigger as the day goes. They will be trans planted into the auto pot system at end of this week. Into the 2x4. Under the double UFL3000 mounted on custom frame. Pumping 402w from the wall. Currently both the girls are in the veg/solo cup cabinet under the UF2000 100w light. Currently 60% rh and temps running 79 lights on. Thanks for viewing an happy growing!
Likes
13
Share
@Dunk_Junk
Follow
Romping through flowering!! Still mega bushy!!! Her trichomes are JUST starting. Looking good so far!
Likes
40
Share
@Chubbs
Follow
420Fastbuds FBT2314/Week2 Weekly update for these 2. I started seeing some rust spots so I decided to add a little General Hydroponics Calimagic at 0.25tsp/gal to my feed. So far seems to stop. I also decided to start a very light dose of nutes General Hydroponics 3 part flora series at the same 0.25tsp/gal to every other feed to see how they'll respond. All in all Happy Growing.
Likes
19
Share
Hello 👋 Im Sinne der Nachhaltigkeit werden etwas ältere Samen als frühes Outdoorprojekt auf dem Balkon gestartet. Genutzt wird ein gebrauchtes Hochbeet, dass ich für einen feuchten Händedruck über Ebay Kleinanzeigen erworben habe. 50l biobizz lightmix + der Rest meines älteren flo Düngers haben dort drinnen Platz gefunden. Den Boden habe ich mit tonkugeln ausgestattet. Nematoden. wurden dem Boden hinzugefügt. Ist ein früher Start, und ich bin gespannt ob die Samen überhaupt kommen. Alternativ hab ich immer noch eine crit (da weiß ich dass sie klein bleibt) und die Baby Boom von kannabia. Der Wunsch ist, dass die Pflanzen nicht höher als 50-60 cm werden. Bin gespannt ob mir das mit 50l Substrat gelingt. Die Genetik sollte allerdings auch etwas kleiner bleiben. Das Lernen steht dieses Mal wieder erneut im Fokus und nicht das Ergebnis. 24. März Ein Samen hat ordentlich gekeimt. Habe in direkt in das Substrat gesetzt. Ein Samen hat nur eine Miniwurzel entwickelt. Habe sie dennoch eingepflanzt. Kann sein dass es zu früh war but we will see. Der dritte Samen blieb unverändert und er bleibt in der Tüte. Er bekommt noch ein paar Tage, notfalls wird er ersetzt. Weiteres kleines Update: habe das eBay-Kleinanzeigen setup um wasserdichte led streifen für 10€ von Amazon erweitert. Damit sollte ich verhindern können dass mir die Sämlinge gailen falls die Sonne nicht wie gewüncht mitmacht. Na dann halt lila 😅Aber jetzt erstmal hoffen das zumindestens 2/3 kommen. 26. März trotz entspannten 9 grad nachts in der Box hat es die erste creamatic an die Oberfläche geschafft. Die zweite lässt noch auf sich warten, der dritte Samen ist nun minimalistisch in der Tüte aufgegangen. Hab das Hochbeet am Abend reingeholt und ziehe die kleinen.doch am Fenster vor. 28. März Zwei von drei sind as der Erde geschlüpft :). Das Wunschziel wurde damit erreicht trotz des „hohen Alters“ der Samen. Hoffe. Wir dennoch mal auf nr. Drei
Likes
43
Share
Diese Woche wurden die Babys getoppt :) mir gefällt der neue Haarschnitt :D fleißig Lowstress Training haben sie auch hinter sich was ich bis nächste woche aufjedenfall weiterführen werde :) übernächste woche heißt es dann 12/12 :D bin gespannt
Processing
Likes
26
Share
Buenos días familia, de vuelta actualizamos con la última semana en estado vegetativo, ya se cambió el fotoperiodo a 12/12 Y es que esta skunk están increíbles, tengo mucha curiosidad por ver que sale. Ph controlado en 6.5 , el alimento lo aceptaron muy bien. Temperatura algo baja por la noche, pero sin problema alguno, mínimas 17. Se comportan genial en indoor y no espigan nada de nada, bastante recomendable.
Likes
8
Share
@dauntless
Follow
10/15 Same stuff, just keeping it stable is all I'm trying to do. Update 10/18 - Heat was ridiculous this week, had to turn one or more light features off, for example, turned off the HPS -AND- the LED circuit on the Phlizon on the hottest day because inside the tent it was like 91 degrees F. Yeah it may not be the perfect environment, but look at the growth from the 15th til today. Major flowering happening, unless I am tripping. I see a lot more healthy growth now, which in my opinion means the transplant idea was SO WORTH IT. I see a lot of crystals forming now and the tops the leaves are turning more white that I could hav imagined -- with two more weeks at least to go, I think I may have some bomb flowers if I dont fuck anything up. Northern light to the left in video has more to go and is not as far along as the Vanilla Frosting. 10/20 Added some new nutes for the last two weeks of flower, bubbling like a madman wanting this grow to finish. White Widow (three plants outdoors) will probably finish in the tent, its just really in stasis but it is getting some frosting of its own. BTW when I smelled the flowers yesterday I was blown away by how awesome they smell, like seriously boutique top shelf aromas going on, this is my first grow indoors and really the first time I have been able to give the attention and care these babies need. I have learned SO much. Especially about stuff I was clueless about before. Like which lights are good. What tent size to get. Ph, nutes, watering, relative humidity, cloning... all new stuff. I have become a better gardener as a result and my 200 sq ft community garden plot is doing way better and I expect next year to be bonkers because I really get the whole ecosystem thing now and how mycorrhizae helps everything. This video helped me a ton: https://www.youtube.com/watch?v=ID9rE5JewVg&ab_channel=ApogeeInstrumentsInc. and this one too: https://www.youtube.com/watch?v=jq_wl8XRUK4&ab_channel=GrowersNetwork Also, really check out Phlizon lights (CREE COB) if your tent can handle the heat. I am already planning my next grow, and I am going high CDB autos... solomatic and fast eddy.
Likes
12
Share
@Klaurenz
Follow
29.12.-4.1.25. This was the last week and my photos are from the end of this week (4.1.). Over all I have some things to notice: 1: I think my lights were too close to my plants. I found out, that the top Buds were a little bit smaller than the buds a little deeper. So I think I have to adjust this in an another round. 2: I hat too much small branches. it would have been better to cut them all of, and leave only the biggest on the plant. they don't smell as good as the bigger ones, and the bigger ones were not as good as they could be. 3: I need to feed with clear water the last week. 4: On the moment I turn off the lights I would do now things different. I should let the plant 3 Days in darkness in her pot. (and do a photo shooting) But after this I should chop the hole plant and put her in a watercan for one week. After that I should dry her completely as a hole plant longer and slower than I did this time. I think best could be 65%-55% humidity, so that the plant could be drying for about 14 days. This time I messed things up because I wanted to do a fresh frozen with the sugar leafes, but it didn't work. so I'll do it the next time just dry.
Processing
Likes
4
Share
Went from 450w to 150w blue for a week due to heat and too much height gain. Weather got cold so I put the 450w red back in as they seem to be thickening up. Feminising was very easy on the ones I chose, I chose only three that had thicker faster flowering and more THC but will cross with the more sativa dominant ones.