Elmer is looking good!! The FUDD!! And a dud LOL

Day 12-07/05/22 everything looking good so far will start to give them Biobizz bloom tomorrow

Week 2: Both plants are currently in a 4-litre pot. The substrate consists of 40 % coconut fibres and 60 % BioBizz All Mix. I have also added 3 g/L Greenhouse BioGrow and 0.5 g/L BioEnhancer to optimise the nutrient supply. Both plants appear vital and healthy overall. However, plant #2 continues to show deformed leaves. I assume that this is due to a genetic defect that unfortunately cannot be corrected. Light Power 40% (76W)

35 days after planting seed. Plants have bushed out quite a lot more this week and gained some height. I don't think it is flowering yet, but I expect them to begin soon. Temps problem has come back the last couple of days I have struggled to get it over 15c. Plants appear to be healthy apart from what looks like nute burn on a few leaves. Decided to cut back on the rhizotonic this week, will probably cut it out altogether next week. A few changes to the set up this week, changed light from Meizhi "450w" to a Meizhi "900w" and put turned my autopot system on. I have noticed there are lots of lower branches developing underneath but are not able to get much light as are under a dense upper canopy of large leaves. would I benefit from any sort of cropping?

🤔🤔🤔🤔🤔 HAPPY GROWING 🤔🤔🤔🤔🤔 (👉Bonus Video Showcases Everything I Have Going on in TropiCannibis HQ 👈) We are now 54 Days into flowering and everything is going great 👍 👈 We are now playing the waiting game👌 Just waiting on the tricomes to amber up a bit 👈 👍 decided to showcase the Mini BigBand , was a extra seed that germed so I kept it as a Mini Me 😊 She's killing it 👈 Except for some watering it's been pretty smooth I've done a little maintenance and manipulation of the canopy 👈 👉Soil Medium Provided by ProMix.ca 👉Nutrients Provided by Agrogardens 👉Lighting Provided by MarsHydro.ca I would like to thank the many growmies for support throughout the years 🙏 So Let's Do This 👊👊👊 Happy Growing

Day 64 - the hulk is here! a. this plant has really surprised me and exploded everywhere b. Pumped out the DWC and installed 15 litres of my explosion flower blend. Adding liquid KoolBloom and keeping the Diamond Nectar flowing for this lady c. Ive noticed that continuing Diamond Nectar throughout flowering in strains that contain OG Kush make the buds much more dense. Day 65 - flowering really well a. I think she loves the new flowering blend! she drank 3 litres overnight! b. Im going to push this plant very hard to the finish c. keeping the PH 6.5 throughout all of flowering Day 66 - The sative genes are shining through! a. I wanted a super sativa plant for this grow, I want a mind numbing head high, this will do it b. it looks and smells alot like White Widow, probably due to the Myrcene terpenes. c. she is drinking 3-4L a day right now, Im dumping in the above chart mixed 1:1 right now. d. tied the larger side branches back a little to open her up, she is thick Day 67 - a little more guidance for the branches a. added in 2 ties for the large side branches to give space, there are many tops here b. she is drinking so much, it is crazy! c. the resin is already being produced, and is very sticky and strong Day 68 - explosions everywhere a. the buds are expanding vigorously, the stigmas are huge and very strong b. she is still stretching upward its amazing to see c. the plant is consuming 3-4L a day right now Day 69 - continue to grow a. drinking alot, 4L overnight, stretching like a giant b. lowered the light just a ilttle to get some more penetration into the plant Day 70 - growing like a weed!

Bueno, para no perder a nadie, el sistema que manejo es con dos indoors en paralelo. Uno en flora y otro creciendo la madre. A la madre la hago crecer hasta sacarle esquejes. Luego pasan al otro indoor, la madre y los esquejes, y ahí comienza la floración. Y ahí mismo comienza la nueva madre en el indoor pequeño. La variedad es de un banco argentino que no sé si sigue existiendo. Se llama "kali seeds" y la variedad es superhaze. Que en teoría tiene unas 10 semanas de floración. Día 01. Puse la planta para obligarme a terminar el prototipo. En este caso decidí usar madera de palets y algunas otras cosas que encontré en la calle. Ya casi termino todo, pero me falta armar los cierres. No voy a hacer puertas, dado que no está centrado, así que uso una tela de microfibra que ayuda a opacar mucho y era mas barata que el blackout. Ademas es impermeable y me sirve para un nuevo mecanismo de seguridad para fugas que quiero implementar. Es bastante simple, pero me soluciona mucho. Hoy no hay mucho más que mostrar. Cuando lo haya terminado voy a ir mostrando como va quedando. No me voy a enroscar con los tsp. Voy a poner lo que use aca. Ahora puse un litro de agua con un poco menos de 1g. de Feeding Grow de Greenhouse. Al menos por ahora, ya que tengo que comprar medidores porque los míos ya no dan confianza. Día 4. Ya estoy terminando de acomodar el indoor. Lo forré con refractario e instalé las "puertas" que en realidad son telas tipo blackout, pero mucho más finitas. Me falta terminar de ordenar la electricidad para que cada sector tenga su timer. Van a ser 3 timer diferentes. Por un lado van a ir luces y ventilaciones de flora (12hs). Por otro lado bombas de aire, bomba de agua y probablemente vientos de floración (15 min/hr). Y por último luz y ventilación del modulo de madres (18hs). Hice el cambio del depósito, a uno de 5 litros, ya que los próximos 10 dias pienso intentar mantener la misma solución (mantuve la proporción 1g/L de feeding grow). La planta tuvo un ataque de una plaga que fue a sus primeras hojas. Por suerte en el momento puse tierra de diatomeas y parece haberse detenido. Pero se pueden ver los amarillos en las puntas. No me preocupa, dado que en hidroponia esos problemas se resuelven y la planta se recobra enseguida. Ahora igual habrá que ir monitoreando, dado que me había olvidado de desinfectar el indoor, cosa que hice luego de este ataque. Tengo fé que llegando al mes y medio de crecimiento, ya esté en condiciones de cortar unos esquejes. Día 07. Por el momento el crecimiento viene rápido cómo suele ser en hidroponia. En unos días le voy a estar haciendo el corte apical. La ansiedad me viene ganando, pero sigo con fé. Esta semana tengo que comprar un par de aditivos y medidores que me están faltando. Pero ya está todo encaminado.

The clone turned out great. Awesome smell, heavy frosty buds. Smells just like the mother plant she originated from. I did capture the light green pigment mutation, and she grew great overall. This clone did Awesome. Thank you Pure Instinto, Medic Grow, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Note: we flipped lights on day 37, saw hairs on day 44.

Drying time

They’re rockin as of day 21

Hectic week. Had some plumbing issues in the house so sorry for late update but the cal mag seems to be working. Last week I add any Nutes. It will be just flushing for the next two weeks. Left plant is maturing at a faster rate but nothing we cant handle! Really looking forward to Harvest time!

more info coming soon

Harvester

Hey guys idk what’s going on my autos it seems as if the Gelato and Zkittlez has just stop growing completely I mean there’s no change at all the Zkittlez Og is starting to fill in forming nice little buds but my other autos seems like they had stop completely I know the lifespan on the Gelato is 76-80 days from seed to harvest The Zkittlez lifespan said the same 76-80 days from seed to harvest Zkittlez Og lifespan is 80-90 days from seed to harvest And I know I’m for sure March 9th marked the 60th day on all autos and I know I stress the hell out of them overwatered etc but it looks as if I might only have one plant to successfully make it yet this is my first grow and why I choose to do autos first to give me a little insight on what I’m doing but I’m going to let these girls go for a full 90 days before I decide to trash em and focus purely on my clone grows

# Tangerine Snow F1 Fast Grow Report (Outdoor) 2024-09-12 ## Overview Tangerine Snow F1 Fast proved to be an exceptional strain from start to finish. This report focuses on the outdoor grow experience, as the indoor plant was harvested earlier and has its own separate harvest report. ## Strain Characteristics - **Ease of Growth:** Very easy to grow - **Structure:** Excellent, with a super structure - **Appearance:** Nice, glittery colas - **Bud Structure:** Open, very sativa-like - **Aroma:** Delicious scents ## Growth Performance - **Adaptability:** Mastered various obstacles throughout the growing season - **Weather Resilience:** - Thrived during a cold and wet early season - Adapted well to extreme heat and sun in early August - **Pest Resistance:** Easily withstood dogs, cats, birds, and insects ## Challenges The only significant drawback was its susceptibility to mold, which necessitated an earlier harvest of the outdoor plant. ## Growing Conditions - **Location:** Outdoor (with comparison to indoor grow) - **Season:** Experienced variable weather conditions ## Future Plans - Definite plans to grow again, both indoors and outdoors - Considered a "keeper" strain ## Additional Notes - The indoor plant's harvest report is available separately and recommended for review - The current plant is being revegetated: 1. Initially grown indoors 2. Harvested 3. Revegetated outdoors 4. Recently moved back indoors 5. Already showing promising bud development in its new indoor environment ## Conclusion Despite the mold issue, Tangerine Snow F1 Fast is highly recommended for its ease of growth, attractive structure, and overall performance in various conditions.

Performed another round of topping as the auto on the right is still doing its thing. Also did some more super cropping on the new growth. Canopy growth has made it through the screen.