The plant is growing perfectly and is already getting very thick (the flowers). Resin is constantly forming and the smell is like a candy factory. There is still hope that the flowers will change color slightly, but it is difficult to get below 27 degrees during the day Flowering day: 34

These are cruising along nicely. They are packing on weight every day and the frost is everywhere.I can't wait to run Tikimadman man again.

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 👊😺Woo-Hoo!! About half way there!! everything is going fantastic in this tent! (wish i could say the same for all of them😿)..The SP-3000 is crushing it again! Their nodes are spaced perfectly for fat buds, they start stacking super low, we would normally get light colored growth down there with our old LEDs, this is definitely penetrating deeper..We're still feeding with every watering but one standout will be getting just water this week (too dark)..we removed a few more large fans from the tops but nothing drastic...temps are much better since firing up a 2nd 390CFM for the far tent.. all 3 tents pump thru 6" host to a single 8" hose out a window, the ambient temps of the room are much warmer than the inside of the tents with that much air moving.. thanks @Asnoriu for confirming we wont be hurting much running full time with some negative pressure this summer..We're counting on these "Fast" strains to go about 8 weeks but time will tell.. not too much else to report, its been a breeze this week...thanks as always for dropping by and happy harvests friends!! ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

Showing a bit under 2 weeks of growth in this slot. I water every 2 days. But on the 3rd, the plant gets dramatic. Haha. Seriously 1 extra day without water and she freaks. Obviously she perked right back up after feeding and all is well. Down sides of growing a massive plant in a tiny container I guess. Just 6 days later from the drought day, I'm noticing crazy bulking of flower. The mother plant that this clone came from took a bit longer to get to this point. The mother plant did not get this much stress during vegetation either. Also am using UVb. And I have to say I'm noticing a massive difference in trichomes compared to the mother plant that didn't get any UVb. Trichs came in sooner and look thicker. I took a look with jewelers loop on older fan leaves and even they have tiny little trichomes. Can't say it raises the potency of it but it definitely adds more. Stopped feeding anything with nitrogen in it around week 3 of flower. Noticing some slight yellowing already from it. Maybe I cut of N a bit too early. Should have continued through week 4. Now I know. I feed Recharge once a week. I like to think it helps as I do notice slight differences a few days after using it. I have gotten rid of root rot before with it. Or so I believe.

Passage de la lumière en 12/12 le 19ème jour pour lancer en floraison les féminisées. Jour 16: Arrosage eau 4l Jour 19: Arrosage 3l engrais complets

Hi, nice to have you here😊✌️ The FatMonkeyAuto is doing well 👍 Unfortunately, it has grown really tall. Which unfortunately leads to slight chlorosis on the upper leaves! Hope she can handle it without drying out at the top 🙈 We'll see 😅✌️ Thanks for your time 😊👍💚

Wassuuuup my dudes 21 days into flowering and the results from the lst and defoliation are showing up. Multiple healthy tops and even the small nodes under the canopy are growing bigger, if all goes well I won’t have many popcorn nugs but I’ll have just big buds (let’s hope) I guess this also means they won’t stretch much more but I think some more height would be good for yield, anyway, can’t complain for the 1st grow and this is a process, there are no perfect grows! This week was also a week to add some more nutrients (the plagron) and it’s working very well for now! Let’s wait for the next few weeks, can’t wait to see the fatty buds 😂 Tell me what you think!

Auto northern lights is shining bright, such beautiful colours she has! bright green with bright white hedgehogs.. man she is one of the most beautiful indicas one can grow, in my opinion😇👌 I could not update her last week (we all know why.. sigh) So i decided to skip a week..😳 and take a rest, i needed that too so i could try to update my own health 😎 but i can tell you, she has been growing so well! despite of all the rain and S**t (and glitches on GD ..😒) shes still the light of my garden! happy growing for all ✊

August 28th Finally white heads appear, Stretching seems to grind to a halt. Let hope so, she has almost grown against the glass, Little more trainig to do Fed with thomaskali few handfulls

Started the first few weeks spreading the plant out by hand a few times a day, After transplanting from a 3 gallon pot to a 7 & as the center started to bush I went further into training and tied branches around the pot with soft garden tie. Foliar feed a lite blend of Rhino skin & Flower kiss with a fine mist a few times a week as well as spinning the pots to promote even growth, vigor and IPM Eyeing up to cut a few more clones to take before flip + cleanup lower canopy / defoliation🌱 BuildASoil 3.0 soil is organic input only.

One more week , they are looking beautiful 🤩...

Hang drying now so will update later in the week once dried

This week I let the plant grow freely with no training or cuts applied. I’m waiting for the branches to reach 5 nodes before doing the next topping at the 3rd node, so for now the focus is just on healthy growth and recovery. Everything is developing nicely, and the structure is getting ready for the next apical cut 💪🌿

Harvest time

Wizard Fuel - Wizard Trees Day 63 - Watered with 3L of RO tap water with nutrients, mixed individually, in order and then pH'd to 6.3! She has made some great progress this week, stretching to almost 1m tall, she has also developed her buds sites really well - she isn't too bushy considering she was topped, and she has really impressive internodal spacing, which is going to make this grow so easy, as she won't require too much maintenance! She has been really really thirst this week, requiring 3L of watering every two to three days, but this is to be expected given she has six or seven main stems 💪 She was lollipopped last week and that has allowed her to focus on her canopy, so yeah, just letting her grow for now🙏

Really nice plant. Very strong smell, Well THC coated buds and very nice effects. Lovely.

Another week checked off and looking pretty good. 1st nutes were are little heavy a think with a little bite burn so have dialled it right back (only fed twice) nothing since. Overall all the girls seem healthy & happy apart from one... She seems to start drooping before the others at the end of the day and just seems less lively. She’s drinking about the same as the others so not sure. Will just keep watching not panic and see what happens. Think the stretch has just about stopped and I’ve filled up the canopy pretty well. Hopefully just big fat stinky buds from here... Spent quite a bit of time on YouTube etc learning this week. Feel like I’ve spotted a few places I’m still going wrong but some easy fixes so all good feel richer for the experience etc... Thanks for reading have a great week 😊