Likes
Comments
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 1/22/22 6th week of veg!!! πŸ’šπŸ’‘πŸŒ± Lots of growth in the last 2-3days, color looks great a couple twisted leaves on #4 but nothing major..we've removed a large fan for better light penetration on #1 & #2..temps have been awesome since the weather changed, plants are loving the intense light and mild climate. We have no real game plan for flower (besides not getting overgrown lol) but size will definitely determine when we flip.. I would assume 2 more weeks at this rate of growth but time will tell.. everyone is eating a little with every watering now (water only every 3rd/4th) and things look great! (for now lol)..Thanks as always for dropping by and happy harvests everyone!! πŸŒ±πŸ˜½πŸ’¨ ⚑Mars Hydro/SP-3000⚑ Specifications βš™οΈ: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt πŸ”Œ (300WΒ±5% @AC120V-277V) PPF: 824umol/S ☒️ PPE: 2.8 Β΅mol/j 〰️〰️ Lifespan: >50k hrs βŒ› Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent πŸŒ‘οΈβ¬‡οΈ -IP65 waterproof ratings, tolerant to high humidity grow environments πŸ’¦ .. -Up to 15 can be daisy-chained together and all controlled from a single light! πŸ’‘~πŸ’‘~πŸ’‘~πŸ’‘~πŸ’‘ ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 1/24/22 We've been running the MarsHydro at 29" this entire grow (found my tape measure lol) and the node spacing is still really tight, I assume there's a lot more red in SP-3000 than lights we've used in the past, at 29" these little plants have side stems as fat as pencils..We plan to keep the light at this distance all thru veg and we'll begin lowering it at the start of flower...plants are coming along nicely, much more growth in the last few days than the previous week. I'm REALLY excited for this grow..I think the SP-3000 will deliver us a half lb or more of Bruce Banger with very little effort..I couldn't be more in love with this setup.... .....until i buy my 2nd SP-3000 that is 😸 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Likes
22
Share
Flowering day 30 since time change to 12 / 12 h Hey guys :-) Every day when I look into the tent, the sight and the smell are a dream πŸ’š. They are all developing very well. There is no tip of the leaf that looks funny at the bottom or at the top πŸ˜ƒ. They were watered every 2 days with 1.3 l each (nutrients see table above). They were all checked and checked for their health. Stay healthy πŸ’šπŸ™πŸ» πŸ‘‡πŸΌπŸ‘‡πŸΌπŸ‘‡πŸΌπŸ‘‡πŸΌπŸ‘‡πŸΌπŸ‘‡πŸΌπŸ‘‡πŸΌπŸ‘‡πŸΌπŸ‘‡πŸΌπŸ‘‡πŸΌπŸ‘‡πŸΌπŸ‘‡πŸΌ A thank you for this wonderful strain goes out to Herzog https://instagram.com/herzog030?utm_medium=copy_link and the Exotic Seeds team You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. You can buy this Strain at : https://www.exoticseed.eu/ Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 πŸ‘†πŸΌπŸ‘†πŸΌπŸ‘†πŸΌπŸ‘†πŸΌπŸ‘†πŸΌπŸ‘†πŸΌπŸ‘†πŸΌπŸ‘†πŸΌπŸ‘†πŸΌπŸ‘†πŸΌπŸ‘†πŸΌπŸ‘†πŸΌ
Likes
2
Share
This plant is growing well, I transplanted them this week into 3 gallon pots from 1 gallon pots. Structure on this plant is pretty nice and visually pleasing to the eye lol.
Likes
2
Share
A planta estΓ‘ bem saudΓ‘vel, numa fase de PrΓ© FloraΓ§Γ£o, ja comecei a incluir fertilizante de FloraΓ§Γ£o, fiz uma desfoliaΓ§Γ£o de PrΓ© FloraΓ§Γ£o e ajustei os ganchos abrindo mais os galhos.
Likes
5
Share
@flowxman
Follow
Magnum is a truly beautiful plant. blooms for two weeks and has a lot of branches. So far everything looks fine.
Likes
13
Share
Started off by setting up the growing environment and dialling everything in such as; RO Water for the RDWC hydroponic system. Water Heater being set at 20 degrees C. Water chiller being set at 21 degrees C. pH being set at 5.7/5.8 Room Temp and humidity 20/23 Degrees C / 60%/80%RH. Instead of using rockwool cubes to place my seeds, I put them directly into the clay pebbles. I then used a DIY humidity dome to place over the seeds until they make an appearance. I have been top feeding RO water every 6 hours. Foil was used to cover the net pot to ensure no light leaks were going into the system. Highly important in DWC. Will add some light nutrients once seeds are more established. Until the next one!
Likes
21
Share
Hello my friends and all those who follow my progress. It is time to update the diary of the mother plant Bubblelicious. This plant is already 4 weeks old. I started to prepare it for cloning, I cut the lower vegetative leaves and washed it with clean water. The plant develops normally, but there is little room for roots. I'm going to make a third level pot, the biggest, but later when after I do the harvest of the Neville Haze Auto. I haven't decided yet how and how many clones to grow, so I'm not disturbing the mother plant.
Processing
Likes
18
Share
4 weeks in and all is looking stellar! The stacking on the BHB is stunning, while the Cheese is producing some respectable clusters and the OJ is defining up top and needs a bit of a clean underneath. All the others are producing from top to bottom so as long as light penetration is adequate, I'll let them go. BHB#1 has a most interesting aroma and I'm impatient to see her develop! Blueberry Headband (1) from Humboldt Seeds, Cheese (1) and Orange Juice (1) from Dinafem Seeds. https://www.dinafem.org/en/orange-juice/ https://www.dinafem.org/en/blueberry-headband/ https://www.dinafem.org/en/cheese/ Lighting https://www.horticulturelightinggroup.ca/products/260w-qb-v2-led-kit Soil Amendments https://www.gaiagreen.com/product-page/all-purpose-4-4-4 https://www.gaiagreen.com/product-page/glacial-rock-dust https://www.gaiagreen.com/product-page/mineralized-phosphate http://www.seasoil.com/ Worm castings Sunshine Mix #4 Epsom Salts Molasses
Processing
Likes
24
Share
@DevokeOG
Follow
Week 10 and week 4 of flower, looking frosty ❄️.
Likes
1
Share
@Fccfarms
Follow
Slow drying took 11 days, 5 days of burping tubs. First trim 229.6g/8.2oz (will use for rick simpson oil) Final trim good.smoke 62.9g/2.24oz Scissor hash 1.2g Quality dry bud weight 638.1g/22.78oz Definitely better outcome this time around.
Processing
Likes
20
Share
@BudXs
Follow
"Chugging" along this week. Weather is hot, girls are loving the all time drip system. Forgot that my nutes and hot sun dont mix well and created a bad case of algae. Will monitor more often and maybe increase the drip flow
Likes
6
Share
After 10 days of flushing, time to harvest. End of week 8 of flower. Smells amazing. Im drying in tent, cant get the temp under 23 celsius. Thats why Im drying plants without a lot of trim. Buds are full of trichomes, 30h of darkness before harvest. Almost all buds are pretty big, so far sooo good πŸ˜….
Likes
Comments
Share
@AmancioW
Follow
they look amazing, i cannot believe its my first attempt but here we go
Likes
47
Share
🌱 πŸ€“ Spent this week keeping up with hefty defoliation and canopy maintenance. Two separate rounds of defoliation occurred this week, the last round included the removal of any branches that were growing. In the underbrush who had not yet made it to the surface of the canopy. Branches that hang out in the underbrush contribute to poor air flow while simultaneously sucking energy from the plant. I don't want my plant wasting energy on poor producing branches, so they gotta go! I also made sure to try and remove the same branches on all new mains as to keep the plant as symmetrical as possible. βœŒοΈπŸ’œπŸŒ±
Likes
13
Share
@Ghosttown
Follow
After 48 hrs darkness I've finally trimmed buds to prep for hanging. Plant 1 .82kg wet weight Plant 2 .88kg wet weight Plant 3 .77kg wet weight Total wet weight incl stems 2.47kg or 2470g Equate to 5.438 lbs wet weight. I can't wait to see dry weight. I'll be happy with half loss in water.
Likes
14
Share
## Week 10 Update: Flowering Phase Transition 🌿🌟 ### 🌱 First Signs of Flowering 🌱 Welcome to Week 10! The transition to the flowering phase is well underway. We’re starting to see some promising developments as the plants move from vegetative growth into the flowering stage. --- ### 🌿 Current Plant Status 🌿 **Greenhouse Super Lemon Haze 🌞** - **Growth:** The plant has reached a robust and healthy canopy. The stretch phase is noticeable, with the plant reaching its full height. - **Flowering Progress:** Early signs of flowering are starting to appear. Look for the first signs of pistils or calyxes in the coming days. **Humboldt Seed Bubba Kush 🌿** - **Growth:** This plant is maintaining its dense and bushy structure, which is great for future bud development. - **Flowering Progress:** Initial flowering traits are emerging. The plant is slowly transitioning into the flowering phase with early bud formation visible. **Blueberry Muffin πŸ₯ž** - **Growth:** The canopy remains strong and dense, ready to support upcoming flower production. - **Flowering Progress:** The plant is beginning to show its first signs of flowering. Calyxes and pistils are starting to form as it adjusts to the light cycle. --- ### 🌱 Nutrient and Supplement Update 🌱 **Current Nutrient Regimen:** - **Power Roots (PLAGRON):** 1 ml/l to keep enhancing root health and overall plant vigor. - **Pure Zym (PLAGRON):** 0.5 ml/l to continue supporting root health and improve nutrient uptake. - **Terra Bloom (PLAGRON):** 2 ml/l to supply essential nutrients for bud development. - **Power Buds (PLAGRON):** 0.5 ml/l to stimulate bud formation and increase flower density. - **Orgatrex (Bio Tabs):** 2 ml/l for a balanced nutrient profile. **Feeding Schedule:** - Adjusting the nutrient mix to support the early stages of flowering and ensure the plants are getting balanced nutrition for optimal flower growth. ### 🌱 Environmental Conditions 🌱 **Temperature & Humidity:** - Conditions are being carefully monitored and adjusted to support flowering and prevent issues such as mold or nutrient deficiencies. **Training & Defoliation:** - Continuing with LST (low-stress training) and selective defoliation to maintain an even canopy and ensure light penetration to all parts of the plant. --- ### 🌸 Looking Ahead 🌸 As we enter Week 10, the flowering phase is becoming more apparent. The first signs of flowers are emerging, and the plants are adjusting to this crucial stage. Over the next few weeks, we’ll continue to monitor their progress closely and make adjustments as needed to ensure healthy flower development. Stay tuned for next week’s update to see how the flowering process is progressing and to check out any new developments in the grow! Happy growing! πŸŒŸπŸ’š
Processing
Likes
15
Share
@HisHope
Follow
9/6 Week 8 And she is doing very well No signs of any problems nuets doing a great job Added another light, custom 90w LED Stretch is slowing 9/8 Buds beginning to form tent is VERY full doing what we can to alleviate some crowding 9/10 Pics Vid Looks like stretch has stopped more or less Stretch may have ended 9/9 Nah its aint ended was just teasing us Increased nuets due to purplish stems seen on the indicas. CocoTek to 10ml/gal A&B Just trying to get things to behave in the tent its really full humidity is very low so thats helping Took longer for things to get into full flower than we wanted, have to work on that. 9/10 Pics Vid Looks like stretch has stopped more or less lights did not need raising