Likes
Comments
Share
@Kitties_and_Colas
Follow
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
1/15/22
😻Week 5 of veg and things are looking good! I didn't know how I wanted to train these so my husband's suggested we top 2 plants and low-stress the other 2.. I went a little too heavy with their last feeding, no burned tips yet but 2 of them are very dark, we'll be doing water only for these this week..there is some minor discoloration on a couple of the lower leaves nothing major but something we're watching..we'll update again midweek..thanks for all the love Growmies ❤️🌱
⚡Mars Hydro/SP-3000⚡ Specifications ⚙️:
Diodes: Samsung LM301B / Osram 660nm (960 total!)
Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V)
PPF: 824umol/S ☢️
PPE: 2.8 µmol/j 〰️〰️
Lifespan: >50k hrs ⌛
Weight: 10.1 lbs (4.6kg)
Veg Coverage: 3 x 5 ft 🌱
Flowering Coverage: 2 x 4 ft 🌼
-The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️
-IP65 waterproof ratings, tolerant to high humidity grow environments 💦 ..
-Up to 15 can be daisy-chained together and all controlled from a single light 💡~💡~💡~💡~💡
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
1/18/22
Things are good 😺👌..New growth seems to be coming in fast on the 2 plants we topped...much faster growth than we've seen up to this point..all plants seem happy and all have a great color (after working out my slight overfeeding )..we've been running the MarsHydro near the top of the tent the entire grow as a test and its still more than adequate. .we don't have a light meter but we do have some crazy tight node spacing to confirm lol...I still say these plants are a little on the small side but they seem to be growing faster now..I'm pretty sure leaving them rootbound in cups didn't help their development...I think they're finally becoming adjusted to their new homes and we'll see some explosive growth in the coming week 💡🌱... fingers crossed 😺🤞
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
01/19/22
AHHHHHH!!! I DID IT AGAIN!! Kicked my timer power after watering yesterday and put these into about 14hrs of darkness 😥.. lights are back on, hopefully they didn't notice lol.. ah well these things happen and I'm sure they'll be just fine ❤️🌱
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~
Likes
17
Share
@Professor_Chaos
Follow
Beginning of week...
The flushing has begun! I flushed with 1L of just pH'd filtered water.. Then flushed with 1L of distilled water.. Not pH'd.. Havent used FloraKleen yet, wanting to get the TDS down as much as possible, then using the FloraKleen to remove the leftover nutrients and whatnot..
Next day...
Flushed with FloraKleen in distilled water pH'd to 6.3.. Runoff is now reading 50 PPM 6.3 pH.. She is doing great.. Can't wait to see what this strain is all about!
Mid week..
Man, this plant smells so amazing! I can't wait to taste this girl! I've just been giving her refrigerated distilled water daily.. I'm gonna start using JUST rainwater pH'd to 6.2 - 6.3 once this gallon of distilled is used up lol.. So far, I've gotten the runoff TDS down to 30 PPM.. Perfection! Can only get better (...or stay the same.. That's fine too lol) from now till harvest.. I may do the 48 hours of darkness.. But that's next week.. Love this strain so much!
End of week..
I don't think this strain is a colorful one.. Which is fine.. Quality is still there for sure! The smell is awesome! Milky/cloudy trichomes.. She should be ready for harvest in another 7 - 8 days! I can't wait to taste this girl! Just plain, low TDS, pH'd water till then. On to the (last) next week!...
Likes
24
Share
@Basementganja
Follow
Harvested the Clones!
I'm stoked how #4 grew out, I think she's the winner!
With limited space in my grow, I'm only going to be able to bloom out the rest of the phenos clones to week 3-4.. The show must go on..
It's the price I must pay for using non-ideal cloning methods... Next round of phenohunting will have 100% cloning success, using my new aeroponics cloning machine.
Likes
10
Share
@nonick123
Follow
🚀 4 clones de Blueberry Pie F1 Fast seleccionados por @stacksfarmz - https://www.instagram.com/stacksfarmz/
🚀 Breeding by @seedsmangenetics - https://www.seedsman.com/eu-en/blueberry-pie-f1-fast-feminised-seeds-sman-blpi-fast-fem
💦 BioTabs 15% DISCOUNT code "GDBT420" biotabs.nl/en/shop/ @biotabs_official
🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE @promixmitch @promixgrowers_unfiltered
💡2 x Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp
Likes
10
Share
@Fat_Olsh_Farms
Follow
Looking good. Starting to flower pretty good. Watered with bud candy day 36(Bettis).
Steelers fans show me some love🤘🏻🖤💛
Likes
9
Share
@BLAZED
Follow
Week 4 (8-7 to 14-7)
8-7
Temps: 20.7 to 26.1 degrees
Humidity: 49% to 57%
9-7
Temps: 22.2 to 27.5 degrees
Humidity: 52% to 65%
10-7
Temps: 22.8 to 27.4 degrees
Humidity: 51% to 65%
11-7
Temps: 22.2 to 25.9 degrees
Humidity: 47% to 56%
12-7
Temps: 19.9 to 25.9 degrees
Humidity: 47% to 62%
Watering: Both 1000 ml.
13-7
Temps: 19.9 to 25.1 degrees
Humidity: 47% to 60%
14-7
Temps: 19.9 to 26.6 degrees
Humidity: 45% to 60%
Watering: Both 1000 ml.
Today i topped both plants!
Light set to 60% strength with a distance of 60 cm.
Likes
134
Share
@Wastent91
Follow
Ehy ragazzi qua tutto bene spero anche a voi lo stesso, le piante di anesia sono magnifiche! Profumi di agrumi della Red pudding e dei buds duri come la roccia! Ho dovuto provvedere a legare tutti i rami con del fil di ferro per sostenere il peso crescente delle cime, purtroppo si vede che all inizio del ciclo non avevo ventilatori etc per poter addestrare i rami in modo che diventassero più solidi e stabili, ora in vece il peso volume di queste cime mi sta piegando l intera pianta! Davvero delle genetiche eccezionali! Con dei profumi davvero complessi da descrivere e non vedo l ora che continuino a maturare per poi avere un finale "di erba perfetta definitiva"! Che purtroppo ancora nn ho mai trovato in circolazione una genetica degna di questo nome... Saranno forse queste di anesia?? Staremo a vedere! Buon 420 a tutti e buon anno nuovo! 😸💪😺🔥💨😎🌱🌿🌲🧑🌾💗
Likes
13
Share
@Organic473
Follow
Top dress her also… trying out this new fertilizer so far so good bud sites everywhere.
Likes
19
Share
@Organic_G
Follow
Wieder vieles gelernt, gute Qualität, was soll ich sonst sagen, die kommende Zeot wird erst einmal mit Autos gearbeitet.
Processing
Likes
26
Share
@eldruida_lamota
Follow
Otra vez familia, estamos de vuelta con estas skunk de zambezaseeds, sin palabras de verdad fumetillas, son una cepa muy lograda las flores están formándose muy compactas , y empieza a engordar de verdad, ya me diréis cómo las veis? Yo las veo muy sanas 🙅♂️
Likes
1
Share
@RageTdavis
Follow
Today was wet out with amazing sun. Thinking of a shelter to build tomorrow. I just want to prevent bud rot if I can as much. this weather from here on out is going to be wet and high UV sun and then mix clouds so we just have 2 more weeks till harvest
Processing
Likes
34
Share
@DudeGrowsWeed
Follow
Seedsman Auto Sour Diesel Haze coming up!!!👍
I love the Sour Diesel strain so I'm really looking forward to this one. Also, the Seedsman Auto Lemon I just harvested was very impressive. I'm going to go lighter on the training from now on because I want to be done by end of May/early June. My grow is in the attic and its gets crazy hot there in the summer, even in VT.
My Perpetual Harvest strategy…. Originally my plan was to start 2 seeds each month, but had some seeds from one breeder that did not germinate early in my rotation. Ultimately, this caused single seeds to pop and messed up my 2 at a time plans. But, that seemed to work out OK, because now I think starting one seed every 3 weeks is a better strategy. This should provide me with 4-5 plants at a time, instead of 6. However… Since I need to shut down over the summer because my tent is currently in the attic, I’m starting 2 seeds at at time for the last couple of rounds.
Plants get fed once weekly on weekends. Seedlings get water only. Plants in vegetation get water and Recharge. Flowering plants get water, Recharge or Big Bloom (Fox Farm). Feeding is done using 2 gallon watering can. Any additional waterings during the week are given on an as needed basis per plant. I lift the plants to help determine which plants are more dry (lighter) and provide water any plants via water bottles and watering spikes.
I give each pot a quarter turn every day in an effort to make sure the plants get equal lighting from all sides. I rotate the plant in place by turning the pot 90 degrees (I am not rearranging the layout of the plants in the tent on a daily basis).
The soil is an ‘organic super soil’ I mixed myself using organic top soil, organic potting soil, organic compost, organic peat moss, organic perlite, organic vermiculite, lime, epsom salt, expanded clay pellets and Jobe’s organic fast start. I am also recycling my soil and water with Recharge when using recycled soil.
For plant training I have tried a variety of things, but my plans now are to do LST bending only, no HST anymore. I may decide to go back to HST again in the future, but I’m curious to compare LST training only to see how that goes. Around 3 week I'll do a FIM cut/pinch once there are 4-5 nodes established. And some defoliation around the 3rd week of flowering. I have been doing HST bending and having good results, but think the HST may be causing the plants to take longer to harvest. I hope LST only will help increase harvests while getting me to harvest sooner.
Setup:
1- Grow Tent 24”x48”x72”
2- Viparspectra 300W LED’s (1-V300 & 1-R300)
1- Hanging 100w CFL (26w actual)
1- Carbon Filter w/ 190cfm Fan & 4” ducts
1- 6” clip-on fan
1- 700w electric heater - oil filled radiator (in front of air intake behind tent)
Likes
101
Share
@squalino
Follow
Journal de Culture : Frost 1
"Dora" (Rinçage J+7 & Diagnostic Lumineux)
Génétique : Frostbanger (F2 Perso) | Système : Autopot 20L
📣 Remerciements
Un immense merci à toutes les personnes qui suivent ce journal depuis le début ! Un merci tout particulier à @MIA_BIOTABS et à Mrs_Larimar pour leurs précieux conseils et leur accompagnement. Merci à tous pour votre soutien !
🛠️ Configuration Technique & Ajustement de Fin
Éclairage : Lumatek ATS 300W Pro – Réduit à 75% 📉 (Ajustement stratégique pour la fin de floraison).
Distance lampe/canopée : 50 cm
Climat : Jour : 25°C / Nuit : 21°C
Humidité (HR) : Contrôlée via déshumidificateur
Tente : 1m80 de hauteur
📅Évolution & Entretien :
Explosion de couleurs, "Queues de renard" et grosse sénescence
Morphologie et état des fleurs :
Hauteur :
Toujours stabilisée à 84cm.
Structure des bourgeons & Stress lumineux : Les têtes sont extrêmement bien gonflées. Cependant, la poussée à 100% d'intensité avec la lampe si près (50 cm) a fini par provoquer un léger stress lumineux. Les bourgeons se sont mis à développer des structures en queues de renard (foxtailing), les calices s'empilant de manière pointue. Pour corriger cela et lui offrir une fin de vie plus douce, l'intensité est repassée à 75% pour cette dernière semaine (ou presque).
Couleurs et trichomes :
Les fleurs affichent une robe tout simplement superbe. Les nuances tirent sur le rose, le gris et le vert sombre, un effet visuel renforcé par la densité phénoménale des trichomes. Au microscope, ces derniers sont majoritairement laitiers, mais n'affichent pas encore vraiment de teintes ambrées.
💦 Gestion du Rinçage & Évolution de la vie du sol :
Rinçage (J+7) :
Voilà maintenant une semaine complète que Dora est rincé manuellement à l'eau claire, l'arrivée de l'Autopot étant restée fermée.
Déclenchement de la sénescence :
La réaction ne s'est pas fait attendre !
En grande gourmande qu'elle est, Dora puise massivement dans ses réserves. La plupart de ses grandes feuilles ont jauni de manière spectaculaire en à peine une semaine.
Le contraste est d'ailleurs amusant puisque, juste à côté, sa sœur (avec Babouche) affiche encore un vert très prononcé.
Résumé de la situation :
Tout se déroule à la perfection. La plante se nettoie magnifiquement bien, les têtes sont dures et l'aspect bicolore de la canopée (feuilles jaunes et bourgeons sombres et résineux) montre que le moment de la coupe approche à grands pas. On surveille l'arrivée des premiers trichomes ambirés sous le régime des 75% de lumière.
À bientôt pour la suite et les dernières étapes avant la récolte !
Likes
Comments
Share
@Andrew_sy
Follow
I tooked some leaves I want a bigger bud because ther are not that big and i think its almost done so im not going to feed them any more and i will start flushing
Likes
12
Share
@cookingwithninja
Follow
day 38 stopped giving PK, carbs. only humic, folvic fishsh!t in watering. lifted terps video sticky icky video
day 39 just humic and folvic into water.
day42 bridal party gained a lot of weight, started to lean over blackberry. I feel like I could chop today.. slight chance might meet remo :)
Likes
35
Share
@nonick123
Follow
Día 108 (16/09) Tras el flush las plantas muestran tímidamente nuevos pistilos blancos! 😍
Hoy no es necesario regar!
Día 109 (17/09) Me he encontrado a OnionOG #1 y a Purple Punsh completamente sedientas! Con las hojas caídas!
Riego con 1,25 litros de H2O a cada una de ellas (el resto no necesitan riego)
Día 110 (18/09) Riego con 500 ml H2O
Las plantas con el bloqueo empiezan a mostrar nuevos pistilos, sobre todo en las partes inferiores
Día 111 (19/09) Riego con 250 / 500 ml H2O
Se vuelven a formar pistilos blancos en todas las plantas que han sufrido el bloqueo! 😍💥
OnionOG #1 va como un cohete formando y apilando flores 💪 🚀 😍
Día 112 (20/09) Día lluvioso. Riego ligero 250 ml H2O
Día 113 (21/09) Otro día lluvioso. Riego ligero con 250 ml
Día 114 (22/09) Detecto algunas moscas blancas apoderándose de las plantas y decido hacer una aplicación foliar de piretrinas (Spruzit a 15 ml / l)
Riego con 1 Litro de Té Floración de Lurpe Solutions. Preparación: 24 horas con bomba de aire (oxigenación) con ingredientes:
Healthy Harvest 8 ml/L + Insect Frass 16 ml/L + Kelp Hidrolizado 0,3 g/L
💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com
🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
