Check the winners The Grow Awards 2026 🏆
Likes
30
Share
Hello Diary. We have reached the 9th week, 6 weeks of flowering and I think we are nearing the end. My estimate is another week until harvest. I look the situation with trichomes every day, most of them are milky, when I notice that some brown ones appear here and there, it is time to harvest. Along with Sherbet Queen on the “Farm” are two Mimosa Auto, which have grown huge, over 110cm so it’s pretty crowded in the grow-box. That's why it became quite difficult for me to take them out of the grow box so as not to damage them. The color of the leaves slightly takes on a lighter green color which slowly becomes yellowish, the flowers are nicely filled, they are big and heavy so I had to connect the plant a bit to the stick and fabric pot to stabilize it and prevent the branches from cracking. The temperature was high this week, around 30 degrees, and this is caused by the great heat outside which was above average this week. Humidity is a little above 50%, which is more than would be ideal, the cause is also heat, so the soil evaporates more and releases moisture. I have two fans that blow for 24 hours and thus prevent the potential occurrence of mold or similar problems. Ventilation also works at maximum power. Watering is still every two days, and more or less that’s all that happened this week, I’m patiently waiting for the harvest. Here is a brief overview of the week. 11/07/2021 - Day 57. Watering. I always prepare about 8 liters of water, p.H I adjusted to 6.4 and watered all three plants evenly. Temp / Humidity on the farm - 30 degrees and 50% humidity. 13/07/2021 - Day 59. Watering. Same procedure as two days earlier. Temp / Humidity on the farm - 31 degrees and 55% humidity. 15/07/2021 - Day 61. Watering. p.H - 6.2 Temp / Humidity on the farm - 30 degrees and 53% humidity. 17/07/2021 - Day 63. Watering and photography. Temp / Humidity on the farm - 30 degrees and 60% humidity. That’s it for this week, a little more and there will be a harvest, I can’t wait for next week. Until then, enjoy.
Likes
9
Share
@AustinRon
Follow
Week 10 - Flower Week 3 Ambassador Cartwright Ambassador Cartwright by IRIE Genetics Transition to Flower Afterglow X Arise (Clementine X Arise) X Arise ((Tangie X Lemon Skunk) X Arise) X Arise ______________________________________ Start of Week: Saturday 10 September 2022 AC3Q 57:F:3:1 to 17 September 2022 Summary: Plant HeightBeginningOfWeek: [ 20, in] Plant HeightEndOfWeek: [ 26, in] *TBD* Temp: 74.8 RH: 70.7 VPD: 0.88 kPa # need to get into the 0.9 -> 1.1 Early Flower Autofertigation - Enable - [ ] Growtek RINGS Calibrated - [ ] Growtek RINGS INSTALLED - [ ] Growtek OPERATIONAL LightSchedule: 12/12 amt: [ 1300, ml] # period: [ 360, min] frequency: [1, day] times: { first: 2100, second: 0300 } # Auto Only!!! Otherwise 1.3 @ 2100 Environment: EC Targets: # rel. | abs (rel + source) ECseedling: [0.4, 0.5] [ 0.7, 0.8] ECearlyveg: [ 1.1, 1.4] [ 1.4, 1.7] EClateveg: [ 1.2. 1.5] [ 1.7, 1.8] ECearlybloom: [ 1.1, 1.4] [ 1.4, 1.7] EClatebloom: [ 1.3, 1.6] [ 1.6, 1.9] ECripen: [ 0.8, 1.1] [ 1.1, 1.4] ECflush: [ 0.0, 0.2] Seedling Early Veg Late Veg Early Bloom Late Bloom Ripen Flush 400* – 500 1100 – 1400 1200 – 1500 1100 – 1400 1300 – 1600 800 - 1100 0 - 200 Fertigation Daily: - {pid: 4, amt: 1300 ml, ec: 2.0, pHRange: [ 5.5, 6.5], time: 2130} - {pid: 7, amt: 1300 ml, ec: 2.0, pHRange: [ 5.5, 6.5], time: 2130} FertigationtheRootedLeafFullRatios: # Flower Week 3 Primer A: [ 10] Primer B: [ 10] CalMag Fuel: [ 6] Silica Skin: [ 4] Lush Green: [ 4 ] Root Anchor [ 6] Peak Bloom [ 4] Resin Bloom [ 2] Last Week of Foliar FoliarMonday: Solar Wind: [ 2.5, ml, 500, ml] Silica Skin: [ 2.5, ml, 500, ml] FoliarWednesday: CalMag Fuel: [ 2.5, ml, 500, ml] Lush Green: [ 0.63, ml, 500, ml] FoliarFriday: Solar Wind: [ 2.5, ml, 500, ml] Peak Bloom: [ 0.63, ml, 500, ml] # Cease Begininning Flower Week 5 NEW WEEK Week's Plan - (Added Veg week to allow SuperCropped Mains HEAL.) - [ ] Install Growtek Fertigation w/ 8” Rings - [ ] Run Feed Lines & Cut to Optimal Length - [ ] Calibrate Feed - [ ] Install Drain Lines, Cut to Optimal Length - [ ] Notch Drain Tube end to eliminate vacuum against drain pan _____ Sat 10 Sep 2022 AC3Q 57:F:3:1 # PM - [x] As Below Fertigation: pid: 4, amt: [ 1300, ml], ec: 2.2 pid: 7, amt: [ 1300, ml], ec: 2.2 LightIntensity: [ 824, µMol/m2/s2] LightDLI: [53.4, mol/m2/d] Sun 11 Sep 2022 # AM IS 9PM Local TIme, the Night BEFORE. AC3Q 58:F:3:2 NOTE: - We’ve added a couple inches removing all restraints, and having flipped last week. As frequently observed, Both plants were clearly vibrant and vigorous after a nights sleep after restraint removal. - Zymes/Bonners/Ascorbic Acid - Soil surface, container sides, and container bottom (exposed roots) - [x] As Below Fertigation: pid: 4, amt: [ 1200, ml], ec: 2.4 pid: 7, amt: [ 1000, ml], ec: 2.4 # AM - [x] Complete Previous Weeks GrowDiaries - [x] As Below Fertigation: pid: 4, amt: [ 1200, ml], ec: 2.4 pid: 7, amt: [ 1200, ml], ec: 2.4 # PM - None Mon 12 Sep 2022 AC3Q 59:F:3:3 # AM - [x] As Below Fertigation: pid: 4, amt: [ 1200, ml], ec: 2.4 pid: 7, amt: [ 1200, ml], ec: 2.4 - [x] As Below FoliarMonday: Solar Wind: [ 2.5, ml, 500, ml] Silica Skin: [ 2.5, ml, 500, ml] Tuesday 13 Sep 2022 # AC3Q 60:F:3:4 # AM - [x] As Below Fertigation: pid: 4, amt: [ 1200, ml], ec: 2.4 pid: 7, amt: [ 1200, ml], ec: 2.4 Wednedsay 14 Sep 2022 # AC3Q 61:F:3:5 #AM - [x] As Below Fertigation: pid: 4, amt: [ 1300, ml], ec: 2.2 pid: 7, amt: [ 1300, ml], ec: 2.2 - [x] Apply as Below FoliarWednesday: CalMag Fuel: [ 2.5, ml, 500, ml] Lush Green: [ 0.63, ml, 500, ml] Thursday 15 September 2022 # AC3Q 62:F:3:6 # AM - [x] As Below Fertigation: pid: 4, amt: [ 1200, ml], ec: 2.2 pid: 7, amt: [ 1200, ml], ec: 2.2 Friday 16 September 2022 # AC3Q 63:F:3:7 # AM - # PM - [x] As Below Fertigation: pid: 4, amt: [ 1400, ml], ec: 2.4 pid: 7, amt: [ 1400, ml], ec: 2.4 _______ Saturday 17 AC3Q 64:F:4:1 CEASED FOLIAR Application: 2022-09-17T16:02:06-0500 # - [X] Complete Week’s GrowDiaries
Processing
Likes
4
Share
Likes
7
Share
She’s bulking up like she’s got a beach date with a joint. Week 4 vibes: fattening, frosty, and funky. Let’s gooo. 🔥
Likes
17
Share
@Hashy
Follow
Week 6 Light cycle=18/6 Light Power=120w 50% Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 56% Low Rh= % Rh step=0% Speed max=8 Speed min=2 Smart controller settings (during lights on). Lights on=06.00am Radiator on= below 21c Radiator off= above 22c Smart controller settings (during lights off). Lights off=00.00am Radiator on= below 18c Radiator off= above 19c VPD aim=0.6-1.4 DLI aim=35-40 EC aim=1.9 PH aim=6.2 Fri 26/1/24 #1 (Day 36) 📋 defoliate lower leaves that hardly get any light. Sat 27/1/24 #1 (Day 37) 📋 H=42cm D=39cm DLI=32.5 Raised light about 10cm Increased light power to 140w H=42cm D=49cm DLI=30.1 Sun 28/1/24 I have decided today is going to be the last day of veg before I flip to flower. Lights will have come on today at 6.00am and go off at 10.00pm, they will get 14hrs light today and tomorrow will be day 1 of 12/12. 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=Veg nutes. Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=1.0ml/L Terra grow=4.0ml/L Roots=0.2ml/L Easy Ph down=0.125ml/L Ec= 2.05 PH=6.1/6.3 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=181ml/min Flow rate per plant=45ml/min. Total volume made=12L Total volume left=2L Total volume used=10L Volume per plant=2.5L (Est) Runoff. Total runoff=1L Ec=2.7 PH=6.1/6.3 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #1 (Day 38) 📋 With no information for flower time I'm going to have to guess she will be finished in 45-60 days. I removed quite a few lower nodes that probably won't break through the canopy, they where ideal candidates for clones. Light cycle=12/12 Light Power=140w 58% Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 56% Low Rh= % Rh step=0% Speed max=8 Speed min=2 Smart controller settings (during lights on). Lights on=10.01-21.59 Radiator on= below 21.5c Radiator off= above 22.5c Smart controller settings (during lights off). Lights off=22.00-10.00 Radiator on= below 18c Radiator off= above 19c Mon 29/1/24 Lights on at 10.00am off at 22.00pm #1 (Day 39)(Day 1 flower) 📋 H=45cm D=46cm DLI=23.1 At 9.00pm increased light to 150w H=45cm D=46cm DLI=24.0 Tue 30/1/24 #1 (Day 40)(Day 2 flower) 📋 Wed 31/1/24 #1 (Day 41)(Day 3 flower) 📋 H=48cm D=43cm DLI=28.4 🚿 foliar sprayed (Sumo Boost 2ml/L). Thur 1/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=water Neutralise=0.1ml/L Roots=0.2ml/L Easy Ph down=0.ml/L Ec=0.2 PH=6.6/6.6 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=181ml/min Flow rate per plant=45ml/min. Total volume made=14L Total volume left=4L Total volume used=10L Volume per plant=2.5L (Est) Runoff. Total runoff=1L Ec=2.0 PH=6.1/6.2 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #1 (Day 42)(Day 4 flower)**** 📋 H=50cm D=41cm DLI=29.0 Lifted light and increasd power to 196w. H=50cm D=50cm DLI=29.5 She is doing great, has a nice height and shape to her. No problems still. She has been under 12/12 for majority of the week. Back soon. Take it easy.
Likes
13
Share
It went pretty good this week (*I'm sorry because of ly work I could not take pictures this week so you have 2 videos*). I will not cut anymore branches before turn into flowering next week, normally it will be a 20 week grow from seed to budd I hope great results with this Cheese from Greenhouse Seeds Company :)
Likes
25
Share
@Dingle
Follow
Week 4 🌸 All 3 plants are noticeably increasing in size every few days which is exciting. I am still doing some selective defoliation while also continuing to rotate the pots to help spread the light. The trichome development has really started to pick up going into week 5. Inside the tent can smell like a sweet shop at times 🍭🍭 Spider farmer still set at 90% 🙂
Likes
38
Share
@B4niTa
Follow
She have good size to fill full tent💪 and hope so she will grow alone in that one. I'm waiting for new tent and Mimosa will move to new. Lot of nutrients to mixing in next run definitely less
Likes
22
Share
Seeding March 16 Germination 21-25 march 🇱🇺🌱🤩 Day 56 from seeding, flower in full progress Grow method 12/12 from seed- Sea of green here I'am again, yesterdy morning my ladies had their last schwazzing that means day 20-21 in flower, all in all everything looks very good, from yesterda on my CO² system is also in operation, tomorrow my ladies only have a bit of ph reg. water from me and giving them some time to revover from the defoliation stress before i start with nutes again.... and now I leave them alone until further notice.... Cheerio & Tataaa🤜🤛👊🏻🇱🇺🌱 ⚠️ Short info about my Humidity: as you can see my humidity sensor from my CT grow system that I have is around 80% RH, but that is not right, my humidity  is around 49-52% my sensor gets 24 hours  fully blown by my humidifier  onto the sensor no matter where I hang it because my ventilation is all around and is blown from top to bottom and a box fan lets everything circulate through the growroom so my old hygrometer is hanging in there againe and everything is fine Amnesia by & for @Superstrains Official Runtz by & for @Zamnesia Webshop came in 1 week later Sour Diesel by & for @Inseedious NL Cobalt Haze by @Sensi Seeds  & Arjans Strawberry Haze by @Greenhouse Seeds  for @Amsterdam Seed Center Under & for @Mars Hydro Factory Nutes by & for @Hy-Pro Fertilizers Soil: Atami light mix & 5mm broken puffed clay & 16mm puffed clay on the bottem of my 5.5L. pots Temp: 24,56 °C temp outside 15°C Lights: 12/12 Humidity: 49-52 % Vpd kpa: 1.3-1.4 Roots 17.50°C Ph : 5.90 Tds/ec 1.5 Water: 0.8L. p.plant  23°C CO²: No Mercy Tabs & boost bucket Nutes by Hy-Pro Fertilizers HyPro : Spraymix 0ml by 1L. HyPro : Terra vegi & bloom 4.5ml by 1L. HyPro : Rootstimulator 5ml by 1L. HyPro : Generator 0.16ml by 1L. HyPro : Epic Bloom 00ml by 1L. HyPro : Cal-Mag  0.5 ml by 1L. Light distance: =55cm to plant = 30cm to CTgrow sensor dimmer on 80% = 980umol/m²PPDF +-10 Vpd/kpa  - 1.350 -1.400 Gear all controlled by @ctgrow 1x MarsHydro TSW3000 1x MarsHydro TSL 2000 Air Van: 900m³ Prima Klima on 30% Filter: Prima Klima 660m³ for seed& veg stage & 660m3 CanLite for bloom stage 3 l water cooling airco Diamant... 3.3l humidifier 1.8l dehumidifier My grow room is variable in size 120cmx120cm² Custom Grow space for sog 150cmx150cm for scrog   Big THANKS to my lovely sponsors : Super Strains,  HyPro Fertilizers, Amsterdam Seed Center, Zamnesia, Inseedious, BTB Grow Supplies, Mars Hydro & CT Grow Systems
Likes
6
Share
Flowering stage activated.
Likes
17
Share
@Hawkbo
Follow
Autos are just starting to flower the photos are dying for some bigger pots. I've been trying to bring up the overall plant health in general since moving everything to a basement the temps are a little lower than ideal. I had a space heater delivered today and monitored the temps but they only went up to around 78°f I want it to be atleast 82°f ideally 85. The heater uses 1500 watt and only increased it about 2 or 3°. I dont think it's worth the extra cost for such little boost. I'm thinking about returning the heater and throwing a 1000w hps in one of the other tents and see if that will raise it anymore. Especially with LED and co2 higher temps would be very beneficial in veg and early flower but the room is so big its gunna be tough to pull off without killing me on electric costs. Any suggestions are welcome. I know this room does decent in flower but I havnt done much veg work down here and I'll have some autos growing this round so it's important I get it up.
Likes
3
Share
Likes
16
Share
Week 9 is coming to an end and it's almost time to harvest. At this point the plants are really loud. I dimmed the light and will probably harvest during week 10. At this point I won't water the plants any more.
Likes
7
Share
These girls are taking off like a 🚀.Day 21 I’ve noticed all really healthy strong plants with min stretch as I now have the SE7000 set at 50 percent.So I did some LST and I expect to see some really good growth this week 🔥
Likes
217
Share
@yan402
Follow
This two were part of another diary and got moved out due to space reasons at VW8 and moved back indoors at VW20 https://growdiaries.com/diaries/218151-auto-god-s-glue-grow-journal-by-yan402 13.09.25 VW21 Both are looking good and are developing tighter nodes than when they were outside, I'm going to have to keep cutting them back every once and a while I also applied nematodes against thrips and fungus gnats. 20.09.25 VW22 some spots and some yellow leafs, I think it's a root problem, probably root bound, but both seem healthy and are getting thicker so maybe just top up with Coco coir and give a slight different nutrient schedule less Tri Part Bloom could do the trick MAYBE lol. 27.09.25 VW23 Topped up the pots with extra coco coir and trimmed the side roots a bit, both plants were root bound 📹 03.10.25 VW23 did a HST/LST session 📹 12.10.25 VW25 Done a major HST session to try and keep them in line with the Sunset Sherbet GF I have going in the same tent, rest in the video 📹 17.10.25 VW25 ffj/fpj/fish 30 → 60 ml 19.10.25 VW26 it just became a one plant diary, keeping #5, #6 gets it's own diary for testing nutrients. 20.10.25 VW26(?) Feed tweak: added 3 g Calcium Nitrate/ 30 L (≈ 15 ppm N + 10 ppm Ca) 24.10.25 VW26 did a defoliation and trimming session 📹 25.10.25 VW26 I'll be repoting tomorrow, 26.10.25 VW27 rest in the video📹 27.10.25 VW27 Epsom Salt 0 → 2.5, Calcium Nitrate 3 → 9 g 01.11.25 VW28 CalMag 60 → 30ml, TriPartBloom 20 → 30ml, Magnesium 2.5 → 3.5g 04.11.25 VW28 no more yellowing between the veins and no new spots, the changes to the schedule worked, rest in the video 📸 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 08.11.25 VW28 – no feed no water (*RUNOFF reused for indoor house plants) 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30 L #1 🍶💧🍶💧🍶💧🍶💧🍶 💧 TriPart Micro: 10 → 30 → 40 ml = 0.33 → 1.00 → 1.33 ml/L 🍶 TriPart Grow: 0 ml = 0.00 ml/L 💧 TriPart Bloom: 10 → 30 → 20 ml = 0.33 → 1.00 → 0.67 ml/L 💧 Cal-Mag: 60 ml = 2.00 ml/L 🍶 Home-made FFJ/FPJ (new batch): 30 → 60 ml = 1.00 → 2.00 ml/L 🍶 Calcium Nitrate (Calcinit): 3 g ≈ 15 ppm N + 10 ppm Ca 💧 pH Down: Citric acid (BuxXtrade) — adjust to ~pH 6.0 📦 TOTAL: ≈ 160 ml liquids + 3 g solids per 30 L = ~6.0 ml/L active mix 🍶💧🍶💧🍶💧🍶💧🍶 ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ Tools & equipment ✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ 2× MarsHydro SP3000 ⚙️ MarsHydro 150mm ACF Ventilator ✂️ Trotec dehumidifier (big unit) ⚙️ Mini no-name dehumidifier ✂️ Kebab skewers (LST – stainless) ⚙️ Wire + roast skewers (LST assist) ✂️ Scissors (HST) ⚙️ Vacuum (for spills & cleanup) ✂️⚙️✂️⚙️✂️⚙️⚙️✂️⚙️✂️⚙️✂️⚙️ 🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 🦄Fantasy Feast ( Seeds)🦄 🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 Species: Hybrid (Regular) Genetics: The mother is Unicorn Whip by Dirty Bird Genetics. The father is Charcuterie by Cannarado Genetics. Effect: Unknown Mixed effect body and head high Flavor: Some phenos are Skunky gassy fruity, some are fruity sour citrus with a chemical touch and a touch of skunk Flowering: Estimated 8–10 weeks Resistance: Strong — Testing phase done YouTube Link: https://youtube.com/-m8h?si=A7x4Zlr2kj-_ga31
Processing
Likes
1
Share
Day 39 and overdue and update!: Another slow week for the ladies and waiting on my finishing touches to the room before I can put the tanks in and let them get off to the flying start they want to do !. I have nipped the small 5th nodes out and been encouraging them to quadline a little but they are still too little to put the pressure on yet . Now time is more available I can get busy on this run finally. I expect some nice results with these genetics
Likes
18
Share
Plant looks less healthy than before but looks not bad