Check the winners The Grow Awards 2026 🏆
Processing
Likes
Comments
Share
This is a strain that is very easy to grow and resistant, after the fourth week it sticks a lug, and does not need a lot of vitamins, it grew with only 13 and 12 hours of light and went through cloudy days and a lot of humidity
Likes
7
Share
@CanOli95
Follow
We're starting Week 4 of Flowering 🌺 Stems finally thickened and bud start growing denser. I increased light density and switched P boost for Plagron green Sensation , because I have a sample left. She is looking a bit thirsty for Phosphorus, which is plenty in there. Potassium is also contained , which will benefit the ladies. In my opinion, it overall looks like I should defoliate more, but I just cut of almost all the leaves from the bottom and she somehow needs to be able to synthesize more energy 😅 Anyway, except for Phosphorus, I think the leaves look pretty healthy in Nitrogen and Potassium. Stems also thickened, so Calcium should also be enough. I'm pretty sure, buds would have stacked more, if I had increased the light intensity a bit before, I think everything seems to be going alright for now. As we're starting Week 4, there is a string smell of sugar in the air. I'm looking forward to how it will increase and turn out later in flower 🌺 I also added a big dehumidifier, which is capable of working for 30 square meters.
Likes
13
Share
5/14 - Day 54/Day 14 Flower Water uptake is increasing significantly. Been watering about a half gallon to a gallon every 3 days. Stretch has started to begin so I've been starting to get more aggressive with the LST. Darker green color has started to return to the leaves. No signs of deficiencies and my girl looks happy and healthy.
Likes
26
Share
@Elpicor
Follow
The Canna Crumbly cocoa biscuits are always a delicious opportunity to fill up on energy. They are easy to prepare!   Ingredients: 30g Bitter Cocoa 300g flour 200g butter 100g sugar 5 eggs 1 bar of milk chocolate with whole hazelnuts HOW TO PREPARE THE CHOCOLATE BISCUITS 1. Boil the eggs for 8 minutes, cool them and shell them.  2. Blend the egg yolks and set aside.  3. Mix the butter in a bowl with the sugar, add the flour and egg yolks, mix, then add to the mixture a bar of milk chocolate with whole hazelnuts previously blended into small pieces (I used the knife for a coarse mince) 4. Add the cocoa to half of the mixture and let them rest in the refrigerator for about half an hour.  5. At this point, roll out the pastry to about half a centimetre, then create the variegation between the two doughs (here you can have fun), once the biscuits have been formed, arrange them on a baking tray with baking paper and bake everything for 12-15 minutes at 170 degrees. IMPORTANT: I put double the recommended dosage for the butter, thinking I was an expert smoker, but, next time I will follow the doses because I slept 12 hours, the edibles have a prodigious effect but you need to calibrate well otherwise you risk going to sleep at 8 pm!😇💤
Likes
28
Share
Very easy to harvest. Dried and was very fruity, no bush whack smell. Wasn't expecting it. As the dry time was long. And the buds super huge and in abundance. Was a very early addition to my crop (50 odd plants) this was done in my 1st phase of 10-15 plants. And I still have a good amount of it. And really looking forward to adding a smoke review next month with bud shots. Update 3 months later. My mate back sent me back 22ml of D9 Distillate, about 95-100% THC 0-5% CBD, I fill carts and use 15-20% resin or natural flavours. Flavours THC BOMB (ORANGE+LEMONS 10%-90% D9) 3 carts Super lemon haze 15-20% SLH rosin 60-70 D9 resin 6 carts. + 5-10% of 1000mg 30% CBD SUPER LEMON HAZE cbd oil. As I couldn't get the burn right on the 1st attempt. D9 was too thick and a nightmare to mix. Bubbles did build up to fast while vaping and wouldnt settle. It's a really great way to make strong vape juice from strong but, not your favourite weed. There's no flavour to it until you add rosin or natural flavours or ratio of good CBD oil. D9 is hard to make. It's much easier to source and then if you grow weed. You can press some to get rosin & add flavours that way or buy flavours. (Need to be potent and D9 mix friendly, works a lot easier) vaping is a huge part of my intake. And I was sick of buying shit carts & D vapes. So, I'm making my own. (With help on the D9 process)
Likes
119
Share
Well growmies ive been looking forward to the Strawberry Pie, the more she went into flower the more the frost would build up , and that's when the terps came out and they came out strong , there no stealth for this girl 👉 Stinky 👈 Buds are tight and full of frost 👈 Couldn't of asked for better Genetics 😉 The smell coming from this girl during the entire grow was just dreamy 👈.... Definitely got the strawberry terps backed by this gassy flav 😍 Amazing 👉 Big thanks to all my Growmies out there in GD land 👈 Much appreciated 🙏 Thanks To MarsHydro for the TS1000 x3 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14👉 All Weeks NutriNPK Grow 28-14-14👉 Weeks 2 & 3 NutriNPK Bloom 8-20-30👉 Weeks 4 to 8 NutriNPK Bloom Booster 0-52-34👉 Weeks 4 & 9👌👌
Likes
27
Share
Ladies and Gentlemen we are back!! This project started last Sunday an Germination week was a success for these Purple punch’s an Forbiddin Runtz from Fastbuds 😍! I went with my paper towel method, sprayed down paper towel with pure water, folded it up inside sandwich bag un seeled in a dark cupboard. Checked everyday to make sure paper towel was still moist and on 3rd day we had all 6 pop open! I planted them Wednesday and all 6 popped up in soil on Friday in my Ac Infinity pots using Fox Farms Happy Frog soil! Tomorrow we will give them a small dose of nutrients, will be doing nutes on Monday, Wednesday and Fridays only rest get pure water! Well y’all let’s have another great week , keep them eyes peeled for next weeks photos an pics !!
Likes
23
Share
@BlaKX
Follow
Hi Growmies es vergingen noch 7 Tage bis ich Ernten konnte ich ließ die Pflanze komplett austrocknen nachdem ich sie ein letztes Mal gegossen habe mit klaren Wasser. Leider ging es mir gesundheitlich nicht gut weshalb ich kaum Bilder gemacht habe und nicht richtig trimming. Werde noch Bilder den Blüten und Rauch bericht machen. Ich bedanke mich bei Hy-Pro und Superstrainsseeds für die collaboration sowie Möglichkeit zum testen ❤️ The future is green 💚
Likes
33
Share
Grow cycle definitely does not correlate to manufacturer’s timeline, so be sure you plan accordingly. Although she’s not a bad plant doesn’t get too tall, odor isn’t too bad and she looks great!! After the cure I definitely love this strain wish she yielded a bit more but I’m happy with her. I definitely recommend this strain and any other Royal Queen Seeds strain.
Processing
Likes
60
Share
They’re day 22 in flower now (3weeks) and looking beautiful and I’m getting some smells to the touch now and can say I think fft2 is amnesia/haze or lemon amz 🤷‍♂️🏽 (Opinion) but will have to wait for my final report to really comment! I measured them today (20/01/20) and 6 is 25” 5 is 23” 4 is 20” 3 is a moohoosive 27” 2 is shorter because of my accident but stands at 22” and 1 is 14” I tried to keep the space I have from overcrowding and seems to have worked so can’t wait for the final results as I only have to wait 3 more weeks to begin flushing fft5 but I’m thinking I may let her go over a week and then get to flush 1,3,5 and 6 at the same time. (Which is logical right?! 🤷‍♂️🏽 But I’ll be checking under my magnifier to see when to harvest though! But I’m hoping on a great finale!
Processing
Likes
9
Share
@Tokologo
Follow
Day 73, took another batch if clones three days after taking the 2nd batch so now I have 80 clones that will root in 11 to 14 days. The sun is hot again back to +30C° day temps, I was to lazy to take individual photos of my mother plants. I'll give the plants 10 days to recover from the stress from taking cuttings. Day 75, last day in the tent for my mother plants, tonight there going inside boxes for 3 day of darkness so that the plants forget the 18 hrs veg lighting to follow the sun. 2nd batch of clones to veg for a week before going outside to flower. Mothers in boxes they will come out on the 24th September
Likes
13
Share
@Sadhus
Follow
Traitement spider mite mélange eau huile de Neem savon potassium, mélanger 50/50 avec de l'alcool a 70 , un traitement, 2 jour de repos , se soir saturation en eau plus traitement ipw Athéna AG avec tableau spécial anti spider mites, apart sa excellente semaine, 2 pied mère avec des feuilles jaunes et brûlé mais pas très grave , dans la table a marée les clones sont incroyables et l'odeur magnifique, des joies couleurs commence a apparaître et les bud deviennent bien compact et bien dense !
Likes
299
Share
At the end of this week EC is at 3.0 so first thing to do next week there will be reservoir change. All goes well looks like the small POGP plant is maturing so probably about two more weeks for her. I spray them every second day with CannaCure or a hydrogen peroxide solution to be safe from the moldy buds. The SE7000 runs at 550 Watt and about 35cm from the canopy and is doing an astounding job. For anyone who is interested in obtaining this efficient and affordable light fixture here's the link: https://spider-farmer.com/products/spider-farmer-upgraded-se7000-730w-commercial-led-grow-light/ Also i included a unpacking recording of one of the packages Spider Farmer send me for the next grow, If you are interested in buying this 6" exhaust fan with filter here's the link: https://cutt.ly/gwjZIk9r Thank you a lot Spider Farmer you guys rock 💚 That's it friends, I hope to see y'all next week.
Likes
5
Share
@Georgius
Follow
Sorry guys, cause of noo time this week i was not able to make normal pics. It was last week, so i just defoliated and flush 5days with ph'ed water and a bit of molasse. Last day 24hrs of dark. Cya after trimming and then after curring.
Likes
13
Share
@RFarm21
Follow
Week 10 January - 16 January 10/1 - Last feed
Likes
4
Share
🌱So this will probably be the last week in the small pot before I transplant the flower into its final 5 gallon fabric pot. 🌱Plant has been growing healthy and looks absolutely fantastic. I’ve finally got the tent temps and humidity dialed in and it shows.. watering every 3-5 days the plant seems to be enjoying that very much. Nothing else to report at the moment.. next week is when the fun begins 🤩🏼🍁
Likes
15
Share
@Purplemed
Follow
Strain Type: Feminized THC: 21% CBD: Low Yield Indoor : 600 - 650 gr/m2 Yield Outdoor: 650 - 700 gr/plant Height Indoor: 80 - 140 cm Height Outdoor: 130 - 170 cm Flowering time: 9 - 10 weeks Harvest Month: Middle of October Genetic Background: Lemon Skunk x Shining Silver Haze Type: Sativa 75% Indica 25% Effect: Balanced, Clear, Stoned Climate: Short Summers Flavour: Citrus, Fruity 20/04/24 Left the seeds to germinate directly in the moist plugs at ~22°C ~80%RH, expecting to see them sprouting between monday and tuesday 🤞 23/04/24 They are already at 12 DLI ~23°C and ~80%RH, good news they look good but bad news, one sister became moldy and didn't managed to sprout, so it's five seedlings left, two of them strugeling one I had to help remove the cap and didn't opened it's cotyledons yet, and the other one looks like sprouting at a far different pace, let's see tomorrow 🤞 24/04/24 I helped two of the trapped seedlings. 27/04/24 5 of 6 seeds did it, great success! The 50L pot will end up in the little tent with 120W LED and the four 25L pot will stay in the big one with 300W LED. D7. 29/04/24 Last day of first week, they are looking good and already stepped up DLI to 18 💪
Likes
41
Share
@Reyden
Follow
Siamo ormai entrati nella 3º settimana di fioritura e sto cercando di tenere un EC intorno a 1650 e PH 6.5, le piante crescono sane e con pochi problemi di carenze, con questi vasi bevono più o meno il 3º giorno e si asciugano benissimo…dovrò sicuramente comprarne altri molto presto!😎 Sono curioso di vedere fino a che punto posso spingere questi semi di Anesia! La prossima settimana saliamo a 1.750 💚🌱
Likes
Comments
Share
Whelp figured out my PH meter was not reading correctly which means I was not balancing the PH of my water correctly....that being said I had been using RO water that *read* it was testing around 7.0, so I was using PH down to 6.5 5/27 - Decided to top the plant. Again with this being my first grow, this was slightly nerve-racking 5/28 - Seems I didn't mess up the top chop, woooh! I tested the PH of my soil today(5.6), if that even tells me anything(I find 2 articles that say it doesn't and another 2 that say the opposite...so that's magical) and ended up just buying a few gallons of distilled water from the store since I didn't want to be running my RO system for my plant and the others in my house.(made sense in my head at the time) Fed a dose of nutrients in the feeding tonight. I believe I was underwatering my plant. 5/29 Forgot to take a picture because I thought I might have overfed the nutes, on the night before.., So I spent the night researching info and trying to figure out if that was the case and how to correct it. But again since I am new to this, I have no clue lol. It also seems I had bumped up the light power from 50% to 100% some how the night before. Ended up dropping it down to 70% power. 5/30 I took the photo, then tied down the main stem. worries of overfeeding have subsided for now... 6/1 Looking extra bushy today. Holding off on defoliation, unless someone tells me otherwise. I am trying to hold off for a few days on doing anything more that could stress out my plant.
Likes
9
Share
another resin monster from seedstockers, with a very special scent, full of flavors! grinded it smelled like peppermint, and vaped it has a great sweet creamy taste!