Check the winners The Grow Awards 2026 🏆
Processing
Likes
9
Share
@H473crew
Follow
HST - heavy feeding - defoliation this week. Should of been done last week *shameface* now some of them are very top heavy and are starting to bend, this is also due to having my clones way to long to begin with. They should have been a lot shorter. 😤 Very happy they have finally picked up from such a bad start in the beginning. loving how short and bushy they are. 😃 Next week will be changing to Flower Cycle 👽
Processing
Likes
89
Share
She's coming on nicely packing on the bud sights I like the structure on her removed some leaves and waste from the underside introduced sumo boost a good week should see some nice changes soon will get some better pics soon ...put up bew pics and video in better light thanks for reading happy growing guy's
Likes
25
Share
@Kakui
Follow
Flower4, día 4 desde que comenzó la floración, se regaron con 1.8 EC y pH 6.2, con los nutrientes puestos en la descripción, no me tienen muy convencido pero creo que van mejorando. Flower9, defoliación y riego, está vez se agregó al riego Bud Candy, el cual seguirá siendo usado en toda la fase de floración. Flower13, riego 2.0 EC y pH 6.2, se agregó Voodoo Juice, Tarantula y Piranha al agua de riego.
Likes
11
Share
@NidoR420
Follow
Finishing her stretch, still no sign of deficiencies/burns :) Last run off came back around 800PPM/6.3PH and I decided not to feed, which turned out to be a good decision. Will feed her tomorrow (day 6 of the week) with a mix focusing on bloom. Regarding her 2 sisters, the first (#4) is still doing amazing as visible on the video :) the other one (Dorel) is slowly recovering from what seem to have been a nutrient lockout. I am also slowly defiolating the 3 plants, starting from the lower nodes. I’m focusing on main fan leaves for now.
Likes
13
Share
Final day of veg flipping the flower today I’m excited to see how these tests go I have lots of hope for the ones and I may only create s1’s
Likes
3
Share
Little devil 2 different phenos first week of the stretch is over going into week 2
Likes
5
Share
@Ninjabuds
Follow
Last week, my pound cake auto plant totally exploded with growth! It's insane how much it's changed. I swear it grew several inches overnight. The leaves are this gorgeous shade of green, and the whole thing looks super healthy and happy. I'm seriously so proud of my little plant baby.
Likes
72
Share
@BodyByVio
Follow
This week I had to Lollipop again (I know is very late and I hope I didn’t stressed the plant to much). My canopy is so tick and so many overlapping leaves and buds in the center of the plant that don’t receive enough light or any at all , n combination with the RH swings that I got going on (45 and 63 RH), I’m very afraid of mold. I should have did a better job at Lollipoping from day 21. I’m inexperienced grower and I didn’t knew better. I decided is better to risk to shock the plant a little bit risking a reduction in yield then get mold or pests and lose it all. My 30 pin dehumidifier works great with the AC but sometimes when the AC( compressor) stops my RH jump at 62% -63%, witch I don’t like . I’m trying to keep the humidity around 50% but in such a small room between the AC and Dehumidifier I got big swings in temp ( 75-82) and RH ( 45%-63%) witch is not ideal but is nothing that I can do. I played with the AC and Dehumidifier setting a lot trying to keep humidity around 50% and temp around 80 degrees and that’s the best I can. My AC is set at 82 degrees and my Dehumidifier is set at 45% RH. Also during the lights off (day time) is very hard to keep the temperature In control when outside is 110-115 degrees with my portable AC (1400BTU) in the 4x 6 closet. Is crazy but I do my best to keep temp under control. This is another rocky mistake I made is trying growing weed DWC in the middle of summer where temps are 105-115 degrees constant in a closet without centralized AC port and at second level in the building. LOL Also I think I underfed her (630 PPM TDS, PH 5.8-5.9) ) and I got a Ca deficiency witch I think is the reason my flowers developed slower then I anticipated. Hopefully I’m wrong and everything will be good. P.S. I got a little bit of calcium deficiency caused by salt buildup (to much PK boost) despite my earlier belief that is underfed. I increased the PPM from week 4 (630-640TDS) to 680 TDS) on week 5 while I kept the PK booster at 3+ml l per gallon. Slightly my PPM’s was rising in my reservoir for few days until I decided that my plant can’t take that much nutrients (PK). 2-3 days after I increased the TDS I’ve noticed more spots on the lower leaves with tip burns on top ( first signs of PK toxicity). One day later found spots and yellowing of the leaves on top of the plant that indicates Ca deficiency caused by salt buildup ( PK toxicity) and reversed osmosis (hope I’m not wrong). Going into week 6 I lowered the PK boost at 1.5ml / gallon and total TDS to 640 PPM. Seems like leaves damage to stop and my PPM to stay stabile at 630-640. Trying to keep PH at 5.8 max 5.9. I will post pictures of my Ca deficiency/ PK toxicity. If you guys have any suggestions please leave me a comment.
Likes
116
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 111821 😽💨Things are going pretty good considering our terrible luck with all things autoflower lol..I think we stopped the calcium deficiency from spreading..these little plants are drinking a ton, 3 gallons every 3rd day..using autos to dial in a tent was pretty hairbrained but things are going pretty good..the MarsHydro fixture is itching to get some photoperiods under it..I honestly can't wait!! Thanks for stopping by grow fam and happy harvests!!! ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 30 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Processing
Likes
11
Share
@Hawkbo
Follow
Couple got a little burn I think maybe a little too much soil in there with the coco on top of the light feed? I got all the final pots filled up today they will go in 3 gal bags either today or tmm. It's a Greentree pro ultra coco/perlite mixed with some roots organic soil about 70/30. This ones in the other humidity dome I gotta get back up and take a pic
Likes
46
Share
So just cruising now, last week saw alot of leg work in the defoliation dept, tidying all lower branches, keeping fan leaves to a minimum, and then aiding the scrog by tucking, pulling, anything to keep things moving in the right direction. The challenge now, as stated earlier is to bring all plants ready to flip at the same time, which is a challenge lol, but an enjoyable one. The bench mark here is the scrog, once that's ready everything else can be flipped, the trick is keeping everything else in there low. Atm 6 plants are hooked up to the Res,with another 2 to follow. Currently drinking about 40 liters every 2 to 3 days. It's amazing how much they can drink... Another tucking session, the nets almost filled now, so I'll probably Monday, depending on how it's looking. I replaced the vipra with another maxbloom and moved the vipra into my smaller tent for the Royal Gorilla grow. So far all is going well with no hiccups health wise.
Likes
3
Share
Had a tough time mitigating heat in the summer when this grow took place. Was also not able to care for the two plants I had as best i could due to a lack of time. Harvest really suffered because of it but still got some great results. Didn't weigh it but i filled 12 32 oz mason jars. 6 Of which were from my cloned plant. 4 were God's Vagina and 2 were a mix of both buds.
Likes
92
Share
Week 12 D86 Flowering 35-40 days since stigma started showing. She is growing really well, for now what ever all the little rust spots were are gone. Still not solid explanations as to what it was or to as why it came up. Made a hard choice. And snipped the roots that were drinking from the plate, as this could of been the cause as to why this was happening on otherwise a healthy looking plant. Lowered the PPM from 1550 down to 1250 and will bring her down another 3-600 over the course of the next week and then another 2-300 the following week and keep her on regular 700ppm feeds of just bloom, but candy overdrive and B-52. All other nutes will be pulled over the next 2 weeks, gradually and not all at once neither, don't want to shock her into a def, just want to make sure all this crap is flushed from her. Big bud, she got her last feed of that today and that's her done on that now. She was started on her normal mix - 300ppm. RH is holding at a steady 65 temp is 26, 21c with lights off. 14/3/22 Added my 2nd intake fan was able to bring down the RH down as low as 53% with the 2 on full blast. Rooms RH is at 46% dehumidifier has been running 24/7 since I got it. Not good enough though. It works but looks like I'm going to get a 370watt 25l (meaning, it takes 25l out of the air every 24hrs, the 1 im using now is a 60watt that gets rid of 2l every 8hrs). It'll do in an hour what this machine takes 8hours to do. So it'll actually use less energy overall. 18/3/22 Plant is coming on nicely, putting on lots of bud mass, hopefully it'll keep packing on bud as there is not much in the way of sugar leafs it'll just be nice dense bud. For the last 24 hrs I've thrown her into a hard flush, 6l of water with 2 flushes one last night 1 tonight after each flush 50ml with sensi cal mag extra 1ml/50ml was given so the plant wouldn't go into full flush and the nutes left behind will break down helping nute uptake. Very important to introduce some cal as if you flush for too long and have a high build up of salts you'll cause a form of nute lock and throw plant into the flushing phase. So always use some cal mag on top to break down the nutes you are trying to flush. Thanks for reading gottagrowsometime
Likes
4
Share
@Boscaglia
Follow
Flush week begins for one of the 2 plants. Not many red pistils yet but I will be cutting in a few days as there is already quite a bit of amber color in the crystals. Definitely don't want to miss out on the nice terpenes, the smells are pretty amazing, very citrusy. The yield looks like it could be quite decent too. Buds not as thick as I was hoping for, but still really good looking. Some leafs on the right side plant showing some signs of various issues and maybe a few previously undetected bugs on some leafs, but looks like all should be good.
Likes
42
Share
@JohnDee
Follow
Hello all! This plant looks mature and I have a microscope but the thing is I thing it has over ripened and, some trichomes fell off? Or let me tell you my trichomes never turned MILKY OR WHITE. Some of them are amber tho. Anyways, on growweedeasy.com there is a guide that says : Harvest even if your trichomes are not ready. I guess it will be more a gut feeling to chop or not chop. Any input greatly appreciated. And yes, I have chopped down the main cola and dried and smoked it. I guess it gets me high but I smoke all the time so it's hard to evaluate because I have also bought quality weed to smoke So guys, only from the photos, what do you think? My trichomes looks like half clear %10 amber. Do you think it could go to amber without stopping at milky? Or milky trichomes fell of but there was new growth and I could never see clear trichomes? INPUT ? :)
Likes
9
Share
@pzwags420
Follow
I harvested on day 55 flower. She smells great and the yield looks pretty decent. super dense buds! I decided to harvest earlier- 8 weeks vs 9 weeks to get a more energetic high out of the blueberry :)