Hello growers Been battling winter temperatures this week so moved this girl into the warmer tent. Got as cold as 16° inside the tent during the day (outside was 6-7°) for the past week. Growth might have been stunted a little bit but did my best to keep temps up without having to install heaters inside the tent. She now has a purple light to finish off her flowering run. Edit: added two of the 200w lego panels to help fight the cold weather. See you next year 😉

Willkommen in Woche 10: Die letzte und diese Woche waren furchtbar nass. Ich hab die Kleine nach jedem Regen geschüttelt trieb um trieb also richtig umtriebig… Heute (tag4) habe ich sie wieder nach dem Regen geschüttelt. Dabei ist leider die hauptblüte abgebrochen… naja halb so wild…die Apple of Eden neben dran wurde gestern schon panisch aus Angst vor Schimmel geerntet. Da hab die Blüte kurz getrimmt und dazu gehängt. Die Durban poison wirkt recht robust gegen Schimmel.. bin mal gespannt wie es weitergeht. Hab mal noch ein Video zum Thema von der Palme wedeln ergänzt…

Estamos llegando a la recta final del cultivo, 1900 ec maxima y ph 6,4, tenperaturas de 24, 25 grados maxima y humedad de 55 no pasa, parece que van a dar muy buenos frutos, desprenden mucha olor las super boof, les quedaran un par de semanas y poco mas

Die Damen sind sehr stark gewachsen und habe einen schönen Stiel ausgebildet.😁 Ich besprühe die Blätter jeden Tag mit Wasser, was die Wasseraufnahme fördert.

Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 27/12/2019 - Fed her 1.5l of 6.4PH water with 0,5ml of each: Grow, Bloom and Max, and 1ml of each: Heaven, Alga-mic and Vera, I use about 1/3 of the nutrient dosage on the chart, to achieve about 200/300PPM (500 scale). 01/01/2020 - Fed her 1.5l of 6.4PH water with 0,25ml of Grow, 0,75ml Bloom and 0.5ml Max, and 2ml of each: Heaven, Alga-mic and Vera, mesured about 280PPM (500 scale).

Topped & Sun-Kissed ☀️✂️ This week, I finally made the call—she’s been topped! 🌿 After a bit of back and forth, I decided it was time to give her structure a little boost and open things up to more sunlight. The side shoots are now reaching out confidently, soaking up every bit of that warm summer glow. ☀️ She’s had a golden week of sunshine and handled it like a champ—strong, vibrant growth and no signs of stress post-topping. 💪 Here’s what went into her care routine this week: 🔸 Fed with BioBizz Grow, CalMag and Alg-a-Mic 🔸 Followed by some homebrewed compost tea two days later for that microbial boost 🔸 Two days after that, a fresh round of Effective Microorganisms to enrich the soil life 🔸 And every 3 days, a light misting of silica spray to keep her leaves strong and resilient I’m super happy with how she’s shaping up so far—great energy, lush color, and the new growth is coming in fast. Curious to see how she responds to the topping in the next week!

Haven't had much time to take care of the plants, just fed once with 2ml/l of Bachumus Evolution Floración and that's it. The leaves continue to yellow. They're starting to smell a lot now, will probably have to use the filter in the next couple of weeks.

~~14/09 Couldnt help myself to try some LST even though it might not be benificial to this plant. Increased the fish mix to 1ml/L, got a spider mite invasion on going. Currently treating with potassic soap and neem oil. Beside that the plants looks healthy to me. ~~16/09 Some stylish rain cover for the rain to come (finally after almost 3 months!)

These girls are doing well still. Responded well to their training and recovered from their topping. All is well and have watered twice in the last week.

Starting week 1 of flower on this Forbidden Runtz Auto from FastBuds! She has been a pleasure to grow so far! She hasn't shown many signs of issues at all. She is definitely a little thirsty right now so we will take care of that immediately. More updates soon! Day 48 we removed some dead and dying leaves from her lowers. Still growing awesome though! Haven't had to adjust the tie on her main branch or anything. She has been basically maintenance free! She even spread herself out beautifully!

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

🍼Greenhouse Feeding BioGrow & Bio Bloom ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ by VIPARSPECTRA (models: P2000 & XS 2000)

The plant is drinking over 3 gallons of water every day. I’ve lowered the PPM’s to 600. Everything seems to be ok now. I will try to change the reservoir water every 5 days from now on. She started to smell amazing! Very lemony 🍋 P.S. Lowerd the TDS to 550 PPM on day 46. Also just realized that I stressed my plan with to much light. I moved the light at 13” and dimmed to 95% ... I will continue to dim it 2% every day...

Lots of trimming, trimming and trimming.

2nd topped on day 20 and she is reacted well to HST, she is too busy with growing, there is no time to get stunted. I give her 1/3 of the feed schedule’s recommendation. Soon I will switch to bottom feed. DLI has been set to 30. Day 26 - today I installed the Megapot system. She has been transplanted from a 5 gal bag to a 6 gal one, it was quite a torture I must say. More stress for the plant. I had to do this for the better drainage. Was it a stupid move? We shall see.

Got some better shots without light and a little video my cam is a bit shit got a video of trichs also in there girls seem to be flushing well started flushing the quick one later than the others as wasn't as developed. Took the 2 tester buds of very bottom under the plants on the first day of flush to try estimate how long to flush for........last pic and vid before harvest next uploads will be harvest hopefully

RA