Check the winners The Grow Awards 2026 🏆
Likes
Comments
Share
Week 5 of flower and seed production for all these plants has started in earnest. We cleaned up the tent somewhat and took down all the males after having done their job. Alls left is to wait for finish now. The nute deficiency appears to have corrected itself now that we’ve balanced out the ratios a little more. The WPM is no match for the sodium bicarbonate but still gonna have to keep on top of that to the end of the grow. Full fumigation of the grow spaces will be required - multi-day process I am not looking forward to. Time cleaning is time not growing, sadly. We’re coasting to the finish now but should still have some decent updates on our super secret seed harvesting method once they’ve fully matured😉👍. Hope everyone’s well and grow’n that straight 🔥. Background Fingers crossed that these Spicy Bitch regs provide at least one male so that we can back build some stock of it. In the event that does take place we’ve got a single clone of each strain from the previous pollen chuck to sit in the tent with them so they can make babies for the next few months. The whole point of the last year was to start making some foundational genetics for a third generational cross we could call our own. If you’ve been following along than you’ll know that it’s been anything but easy. Our previous pollen picks didn’t pan out at all so we’re back to the drawing board with a new option from ExoticSeeds. This’ll be a 10 plant run with 5 regs and 6 strains for pollination including the strain itself. We’re running in a 2x4 MarsHydro grow tent all powered by a Mars Sp6500. That’s a little more than 600w packed into half the recommended footprint😳. Why? you ask - because we like our buds big and overcompensatory😂. Really, I’m just of the mind that we can pack more light into this space than recommended and get much better results. The math doesn’t lie. At least not as long as I wasn’t high when using the calculator again….. Many thanks to @MarsHydroLED for the opportunity to test run the equipment👊. In addition, we’ve also moved to a new nutrient system - Druid Nutrients out of the Netherlands. They don’t really have a presence on GD yet but you’ll be hearing about them very soon I’m sure. The beauty of this system is that it’s literally a 1 (one) component system for the entirety of the plants grow cycle. It really has changed the game in terms of ease of feeding and maintenance. It’s also very versatile and seems to provide everything needed across multiple different strains in the same ratios. Keep your eyes peeled for these folks. Pretty much a guarantee that they absolutely blow up once more people know about them👍👌😎. Strain Background Spicy Bitch: predominantly sativa, heavy yielder with a daytime kinda trip profile. It’s a cross of Queen Mother and a Pre-2000 AK47. We’ll pull what pollen we can and hope to have a female run out a larger supply of seed for the future. Many thanks to @Exoticseeds for the chance to give these beans a go👍👊. Pollination Strains: Holy Surfer S1 - this is one of the focal points for this cycle. A fellow growmie was kind enough to ship over some S1 genetics I took an interest in. The only ask back was that if I did cross it to send a few his way for testing👍. Shoutout and cheers to @blendmedmedman. Hoping to have something back to ya in short order. For full details on this alluring hybrid option check my buddies link at seedfinder - https://en.seedfinder.eu/strain-info/Holy_Surfer/Smiling_Tiger/ Northern Lights - this came from a particularly interesting batch of seeds that have shown a very dependable variegation trait. It’s a compact and squat plant requiring very little maintenance. Typical for the strain really. It’s been chosen as an option to potentially mellow out the high , shorten the stature of the resulting hybrid and inject it with some of that mellow indica effect. Boogie Nights - total shot in the dark. Still haven’t even tried the strain myself yet but it was available at the right time and interesting enough to make a salad with. Big thanks to AMS who’ve been nothing short of an excellent seedbank to collaborate with. Expect similar growth characteristics to that of the Northern Lights. Better resilience however. Blueberry - this particular clone is from extremely strong stock. Spliff seeds broke the mold with this strain. She’s lower maintenance than the NL, more resilient than anything else we’ve got on the menu and the terp. Profile on this girl is out of this world. If we can bring any of these qualities to the cross, then it could be magic👌. White Widow - garrghh, I just can’t get away from this particular plant. Again, still haven’t even tested the buds yet and all I can say is that the growth characteristics are extremely vigorous and desirable. This plant is one of 3 unicorns that I have yet to tame due to a combo of extremely bad luck and circumstance. All told, it’s still the same story: a VERY experimental breeding project designed to shotgun a broad swath of genetics against a reliable and dependable Breeder who’s put out proven fire 🔥🤟😎👍.
Likes
13
Share
25th April day 46 4 plants stripped I will give them a few days to recover and flip to the 12/12 cycle
Likes
93
Share
@Roberts
Follow
Auto Opium grew okay. She took a long time to flower, but has come to a finish. She did get a little too close to the grow light. She has a fruity hash smell and looks like it will be a good smoke. Thank you Medic Grow, and Divine Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
5
Share
This bud has a sweet and sour fruity candy flavor with a punch of citrusy diesel upon exhale. The aroma is of spicy diesel, pungent dank and super sour citrus. Permanent Marker buds have dense oversized spade-shaped bright emerald-green nugs with purple leaves, lots of thin orange hairs and tiny, amber-tinted white crystal trichomes. Wet weight is exactly 1.50 lbs with a perfect blend of milky and amber trichomes. Very very pleased with the final result.
Likes
17
Share
runoff ec measured 2.0 this week. they went to bathroom and now they are around 1.5
Processing
Likes
84
Share
@Beans
Follow
Man I had the weirdest dream...and for some reason I wanna put lotion into baskets...🤔. Anyway I'm probably just stressed out cuz beans said I need to start paying rent. It's hard to get a job as a plant so I'm getting desperate. He said I owe him $50,000 a month/friend price. Seems high but it is a pretty luxurious closet. It even has clothes in it. I'm about to go hit the streets and try to hustle up that cash but if anybody wants to help by donating a lot of $ to my cause 'Feed the Leaf' here's my link. https://paypal.me/pools/campaign/110064055993592970 Anything helps... God Bless (blessing is given by the God of your choice but is redeemable at any God's location)
Likes
27
Share
6/13/2023 Week 10- Day 1 of Flower (Day 131 overall) (Day 70 of Flower) Auto Pilot Day 6.. Checked the Trichomes and the bud density and both are looking good.. Definitely needs a little more time for the Trichomes to be where I like, so based on my check I think we are still looking right around the end of the competition 22June to be done and ready for harvest. I do like that the fade is coming in the leaves nicely, so my chart I think is dropping off the Nitrogen exactly like it is supposed to. 6/14/2023 Week 10- Day 2 of Flower (Day 132 overall) Auto Pilot Day 7.. Decided I would take some contrasting pics today with my light up to 100 and my light all the way on Dim. I hope you enjoy the pics. 6/15/2023 Week 10- Day 3 of Flower (Day 133 overall) Auto Pilot Day 8.. Decided to take a look at the Trichome's today and Check to see where they are at and honestly if I might ho ahead and start my flush tomorrow and harvest on Sunday. 6/16/2023 Week 10- Day 4 of Flower (Day 134 overall) (Day 74 of Flower) Today I pulled an Armageddon however instead of darkness they are going to get 48 hours of light. The reason why they are going to get light instead of dark is when I was taking out the netting a lot of the buds were so heavy they fell over and exposed some areas I really want to get some light to... so 48 hours of light at 40% while I watch what should be a beautiful final fade as the plant eats up the last Nutes. If anything goes wrong I can abort take the photos and cut so will pay really close attention to how it is looking over the next 48 hours. Added 30 Gallons of PH only Water. Reduced Lighting to 40% removed program time off. 48 hours of light. 6/17/2023 Week 10- Day 5 of Flower (Day 135 overall) (Day 75 of Flower) I had someone tell me that a few growers had done as I did and Gone Armageddon on the plants. Filling it with PH only and said the plants did not respond well and they were taken out of the comp at the very end because they felt like the pictures just wouldn't come out right. Even though I did go Armageddon, The PPM is at 353PPM with the residue of what was left in the buckets after draining as well as what I am getting from the TAP so I think they are doing good but I am checking them every few hours to see how they seem to be doing and I think they are doing good still and are on track. I also started prepping the area for the pics tomorrow T-24 Hours until Chop 6/18/2023 Week 10- Day 6 of Flower (Day 136 overall) (Day 76 of Flower) (Harvest Day) What a day.. what a day.. what a day.. as I was setting up and trying to figure out how I was going to get my pics #3 stems started breaking, it fell over and other stems broke.. So no really stunning competition photo for her, she had such a nice purple fade.. #2 stayed up in the Tent so that is the one I had to go with to submit for the contest. I wet trimmed them as they went into the tent and they took up three rows hanging in tent. I also decided I wanted to try some so I put a little in the freeze dryer for a 48 hour smoke test.. I will weigh it and add that to my total weight for the plants when it is all done.
Likes
20
Share
@arDub
Follow
Week 3 Flower Update Germination date : 01/22/2022 Day 1 seed surfacing: 01/24/2022 Current: Day 21 FLOWER 04/04/2022 Lights: Currently 975 PPFD @ 12 Hours = 42 DLI Strain 1 (Left in Pics) 🍁: Solfire Gardens- Bahama Bussdown Strain 2 (Right in Pics) 🍁: In House Genetics-Slurricane #7 Light : ChilLED x3 500W Tent : AC Infinity CLOUDLAB 642, 4'x2'x6' Air Filter: AC infinity 6inch + Carbon filter Growing Media : • Reammended Buildasoil 3.0 Living Soil + red wiggler worms in 15 Gallon Grassroots Pots Nutrients : Lots of Microbes + dry amendments Water: Purified Water + Tap Water mix to 150ppm; ph is around 6.8-6.9. Water Method: Hand water first few weeks then turn on blumats Soil Wetness: Using soil moisture meters, mbar target: 80-130 (Early Veg), 80-150 (Mid-Late Veg), 80-180 (Flower) Notes 📝 -Another nice week of growth as they near the end of stretch and start putting energy into bud development -Plants looking hungry (especially slurricane) despite plenty of top dressing + bloom compost tea. -Defoliated -Increased lights to around 950 PPFD / 42 DLI
Likes
25
Share
Weather was already cold, she has long flowering for our climate.
Processing
Likes
13
Share
@kevgrow
Follow
Hey Friends, end of week 13 from seed. This week i noticed colas are slightly getting thicker, but still a slower growth compared to my other plant (#2) I had to install some yoyos because some colas are falling to the side due to its weight Had trouble maintaining a steady humidity level Leaves are beginning to fade, not sure if its normal or because I increased light intensity this week Increased light intensity to 350 - 400 lux x100 Colas for some reason do not look thick enough and so far no amber on the trichomes, might need to wait Another week or two so I could begin flushing. Smell is stronger like green lemon mango, that weird smell it use to have is slowly going away. QUESTIONS So I planned a trip with my family on oct 9th, when booking the trip around 3 weeks ago I estimated that the plant would need another month before harvesting. Will this plant be ready for harvest before oct 9th? When should I begin Flushing ?
Processing
Likes
3
Share
Likes
42
Share
Bonjour à tous les padawans et les maîtres jedis Cette plante est vraiment exceptionnelle! Elle représente la force et j'en suis fier 😍 La semaine 4 est déjà la ! Ma plante est saine le LST ce passe relativement bien je l'ajuste tout les jour je le combine avec la technique du pincage d'Apex cela me permettra d'avoir une canopé plus homogène donc une meilleure pénétration lumineuse et par conséquent un meilleur rendement. Le pinçage est une pratique courante en horticulture. Beaucoup de cultivateurs l'utilisent pour améliorer le rendement de leurs plantations cannabiques ou autres. Il est souvent question de 'taille' des bourgeons apicaux. Cette taille se pratique également mais il n'est plus alors, à proprement parler, question de pinçage. A l'instar d'une taille, le pinçage va permettre de stimuler le développement des ramifications tout en préservant les sommités en vue de la floraison. Il est très utile pour uniformiser une canopée. Pour réaliser le pinçage, il vous suffit de presser 'fermement' la tige [entre le pouce et l'index] aux environs de l'apex jusqu'à sentir un léger 'crAck'. Cela aura pour résultat d'endommager les vaisseaux impliqués dans la circulation de la sève [situés dans le pourtour de la tige], la tige conserve toutefois une certaine rigidité. Pour obtenir le même résultat, il est également possible de vriller légèrement la tige sur elle-même. L'interruption du circuit d'alimentation entre le ou les apex et le reste du plant va provoquer un déséquilibre hormonal qui aura pour conséquence le développement des ramifications antérieures au point de pinçage. Jour 25 j'arrose mon pot normalement avec un quart de son volume en eau toujours avec un PH de 6.3 à cette eau j'ajoute 0.7 gramme de greenhouse feeding enhancer pour favoriser son développement racinaire. Par la suite je n'aurai plus qu'à ajuster mon LST jusqu'au stretch et surveiller mon arrosage, Je pincerai mes apex suivant la pousse de la plante pour uniformiser la canopé. Petit rappel de ce que est le LST et comment le pratiquer le plus efficacement possible: Quand commencer à appliquer la technique LST De nombreux cultivateurs commencent la manipulation dés que les plantes possèdent entre 3 et 6 nœuds ou une paire de feuilles. Durant cette première étape de la croissance, le tronc encore flexible est pliable sans risque qu’il ne se casse, même si au fur et à mesure du développement de la plante il sera de plus en plus difficile de le plier. Nous pouvons continuer à guider la croissance des branches durant toute la culture, même durant la floraison, ce qui pour cette étape représente un grand avantage face à la taille, qui n’est pas du tout recommandé une fois que la formation des têtes commence, cela stressera en effet la plante, ce qui aura pour effet de retarder la récolte. Comment appliquer la technique de guidage LST Si nous sommes prudents, la flexibilité naturelle des fibres du cannabis permet de plier leur tronc et branches avec une relative facilitée, même durant la floraison des plantes. En utilisant une corde fine, nous pouvons accrocher la pointe de la plante à la base du pot par exemple ou à un tuteur que nous aurons planté dans le substrat. Nous plierons le tronc avec précaution et nous le fixerons avec la corde, à partir de là, nous pouvons augmenter progressivement la tension de la corde, chaque jour un peu plus, jusqu’à obtenir la position souhaitée. Soyez attentif à la réaction de la plante, essayez de ne pas appliquer trop de pression sur la corde et rappelez-vous que la flexibilité des branches peut varier d’une plante à l’autre. Pour obtenir de meilleurs résultats, il suffit de suivre quelques règles simples. Pour commencer, nous devons choisir une corde fine mais pas trop pour ne pas blesser les troncs au fur et à mesure qu’ils grandissent et qu’ils deviennent plus gros. Nous pouvons utiliser des crochets en plastique souple ou de n’importe quelle autre matière flexible pour éviter d’endommager les plantes. Spécialement en intérieur, utiliser des cordons en plastique de couleur (voir les diaries de @Silky) est très pratique pour voir facilement les accroches et faciliter le travail au milieu du réseau formés par les cordes, les tuteurs, les mailles ou les supports que nous aurons dans la culture. Bien entendu, en culture extérieure et surtout en guerilla nous ferons juste le contraire et nous utiliserons des matériaux de couleur qui n’attirent pas l’attention pour que notre jardin reste discret. Pour stresser les plantes au minimum, la mieux est de réaliser ces manipulations le soir ou juste après que les lampes en intérieur s’éteignent, ce qui leur permettra de se remettre durant la nuit. Normalement, le jour suivant nous pourrons observer comme les pointes des branches que nous avons pliées se dressent de nouveau vers le haut à la recherche d’une source de lumière. Je combine un pincage d'Apex (explications plus haut) au LST cela me permettra d'avoir une canopé plus homogène donc une meilleure pénétration lumineuse et par conséquent un meilleur rendement. Que la force soit avec vous 💪
Likes
66
Share
@Ripper
Follow
Girls are getting fat.. it is the fun time now
Likes
9
Share
@SeseGrows
Follow
Home Interior 90x90// Do Si Dos 33 - Granja Barneys + Sour Diesel + Roadawg //Semana 5//FLORACIÓN - Grotek Nutrients. - Lumatek LEC 315w+ 💎 . LEC 315w —> 100%
Likes
14
Share
@CANNASIM
Follow
Moving forward, blooming nice, this second gen is taking form and gaining weight. A few weeks and we will have a nice harvest. Tent is nicely populated and filled. Once i have setup the “semi scrog” it has conformed to it in a couple of days and did a massive difference. It really opens the canopy and create a huge surface to take advantage from the light as opposed to letting it go naturally. I’m defining the technique as semi scrog because i did not setup the net in a traditional early way knitting in veg... It was done later.
Likes
4
Share
Another straightforward week. Increased pk 13/14 and they’re starting to fatten up nicely and smell good to. Bit annoying the left plant has a few branches that have stretched out as I’d of liked to have got the light down a bit closer to the ones below.
Likes
5
Share
@Ibgrowing
Follow
I have harvested my ladies. The buds are nice and thick. I'll definitly do an update on the drying and curing. I have already done some wet trimming as you can see by the two pictures, first round was just a rough trim, second one a bit more precise. They are now drying in my garage on a washing line.
Likes
7
Share
@Adam22
Follow
I am waiting to start some more seeds I already have them but another tent is needed and a couple of leds, good ones. It will take a few weeks to sort and as usual I have some inspections on the house I need to try and time carefully around 🤔 I did have 2 during this grow the first was in veg luckily they grew in a closet the second was week 3 flower (don't ask) The smell didn't stink out the room like the wedding cake did so I will try and cure this as long as possible to last this as close to next harvest as possible 😅 my cats didn't eat my plants this time so thats another bonus. Need to look into getting a proper air circulation for the new tent I used a fan the whole time my tent was wide open I want to have it sealed next time so I can fully zip it closed ffs lol defo would recommend this strain but I don't think they stock these anymore 😕 I got a coupe seeds from the first plant I was right the pic of the top bud a few weeks ago you can see the seed just about forming after the branch got broken off we will live and learn 😉
Processing
Likes
55
Share
@Njaak
Follow
Real flowering started this week. The stretch just started and the crazy bushiness continues. Did some fairly heavy defoliation on the under canopy and select large leaves blocking light to the bud sights.... but controlling the growth is a balance. Trying to keep as much photosynthesis as possible until I can really tell which bud sites will be the real colas. I did a full reservoir swap with flowering nutrients, and a pH balanced water only flush in between (about 18 hours just running pH 5.9 water). Once I put the new nutrient solution in, the plant just shot up. It was spectacular the difference in literally only half a day. I have noticed that a thin coating of something was on the air line of the bubbler and a couple other surfaces. Cleaned it off before the water flush, but still note a very slight film on the top of the fresh nutrient solution. It's a touch worrying but not sure it's an issue. Will watch carefully.