Que pasa familia, vamos con la cosecha de estas Gorilla Cookies Fast Flowering, de FastBuds. Por dónde empezar, las flores son bien compactas , y van repletas de resina, tienen tonos por dentro muy bonitos, y tiene un aroma a galleta. Es muy sencilla de cultivar, es de ciclo corto mdio aunque también si le dais una semana más no pasa nada agradecer se agradece al final. Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨

Week 5 with Glueberry OG! She's the stickiest of the group! She's growing nicely, lots of bud sites but she continues to show signs of deficiency, cal-mag is my first guess, maybe also a P & K def too. Still, I'm happy with her progress.

Week 10 - - - - - OMG she got frosty!!!!!!!!!!!!! She smells so beautiful! So Citrus! So Lime!! 😂 😍 This week I have added a couple of grams of 20-20-20 fertiliser to her water. For a few weeks now I've been loosing a lot of lower leaves. They turn yellow and fall off. I did send the growcaps rep a pm a couple of weeks ago now asking about the active length of growcaps but it's gone unanswered..... so I took things into my own hands. She seemed to like the boost in nutrients with the amount of frost on her and not dropping any leaves. I do think the growcaps worked very very well at the start but I think they need to make them last a few weeks longer.

Buds are fully purple

9.26 - The Dumpster Queens is really starting to stank good. Very diesel and earthy! The buds are still putting on weight and are dense, very little squish or give when I give em a moderate pinch. I am imagining I have ~3 weeks left before chop.

Last round of defoliation until harvest. These girls are officially in bulk mode. Again, 3 completely different phenos. That purple one is something to behold!

Going to do some dark time before the flip. Should boost the phytochrome A before starting the 12/12 schedule. Opened up some new growth with the stress clips. Time to flower for my first time! I’m very excited to learn this stage! Any comments please add thanks all!

03/18/2022 I have not shown the third clone as much because of training I will start with her this week. Did some wiring wrap around on two branches, and stem cracked, super cropped third branch. ( I ran out of wire had to improvise) I got one clone for this girl starting! All Girls update I will post pics on day 2. Tomorrow🙏🏻 Ps. I fed (watered) with molasses, and aloe gel fresh squeezed by me.and organic grown (by me) One tbls (14.787ml) of each in two gallon jug(7.571l) also I layered coast of Maine 5-2-4 one teaspoon per layer one on top as well. I like the extra potassium in this blend as plants can absorb and store more potassium and save for later use (flowering) . 03/20/2022 Here are flowering girls

This week I let the plant grow freely with no training or cuts applied. I’m waiting for the branches to reach 5 nodes before doing the next topping at the 3rd node, so for now the focus is just on healthy growth and recovery. The plant is slowly recovering from the deficiency. The new growth is improving, but the older affected leaves won’t recover as they’re already too damaged. For now, I’m just letting her grow and stabilize 💪🌿

Man how great is my Medusa F1 from Royal Queen Seeds, She is really taking off in the second week of flowering. I mean, have you seen the fruit formation on this girl? She's going to be a real beast! And I can't forget to give a big shoutout to Royal Queen Seeds for sponsoring my journey - their seeds are top-notch and I'm grateful for their support. By the way, have you heard of the "Medusa's Gaze" cocktail? Yeah, it's named after the infamous head of snakes and apparently it's quite potent. But enough about drinks, let's talk about the plant! During this stage, it's important to make sure my Medusa is getting all the nutrients, light, and water she needs to keep growing strong. I'm keeping a close eye on her progress and making adjustments as necessary to ensure she stays healthy and happy, for this i trust no one but Aptus Holland and the magic only they know how to do <3 <3 <3 Overall, growing Medusa F1 is turning out to be an amazing experience, and I can't wait to see how she does in the coming weeks. As always thank you all for stopping by and for supporting me on this journey, i am super passion about growing and fell blessed to have you all with me on this new journey <3 <3 <3 Genetics - RQS MEDUSA F1 Ligth - LUMATEK ZEUS 465 COMPACT PRO 
Food - APTUS HOLLAND 
 
All info and full product details can be find in can find @ https://www.royalqueenseeds.com 

https://aptus-holland.com/
 
https://autopot.co.uk/ 

https://lumatek-lighting.com/ With true love comes happiness <3<3<3 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3<3<3 <3 <3 <3 Growers love to you all <3 <3 <3 Medusa F1 Medusa is a true F1 hybrid created from pure, inbred cannabis lines. She boasts uniform grow traits, mouthwatering aromas and flavours, and plenty of potency. If you're looking to bring stable, elongated plants into your room, tent, or garden, look no further. Mouthwatering Aromas, High Potency, and Mid-Size Plants Though she won't turn you to stone like the mythical goddess after which she's named, Medusa F1 is bound to get you plenty stoned in her own special way. Combining genetics from inbred lines deriving from Sugar Magnolia, a thick and sweet indica, and American Beauty, a fast, fruity hybrid loved for its well-balanced, positive high, the result is an autoflowering F1 variety that produces fresh flavours, a unique cannabinoid profile, and large yields. A very aromatic cultivar with a vibrant concentration of terpenes bearing notes of fresh mint alongside an upfront peppery kick, backed up by hints of fresh fruit, berries, and tangy fuel. Her thick, frosty flowers consistently produce high levels of THC and CBG, as well as high concentrations of myrcene, ocimene, farnesene, and caryophyllene. As a result, Medusa F1 has strong effects that relax and stone the body from head to toe (brought on by particularly high concentrations of myrcene and farnesene) while motivating the mind with an uplifting, creative, and motivating kick (thanks to high concentrations of ocimene). Medusa F1 seeds produce elongated autoflowering plants with long, strong branches and well-spaced internodes. Plants regularly grow up to 80–85cm tall and boast a fast flowering time of just 42–45 days (72 days from germination to harvest). Thanks to her genetics, Medusa F1 produces plenty of thick flowers with big, swollen calyxes that make for very easy trimming. Medusa F1 is very stable, handling stress and unfavourable growing conditions with ease, though she is somewhat susceptible to Botrytis, so make sure to keep tabs on the humidity in your grow room/garden

Plants look good, getting super bushy. Still quite hot, cant go full power, also not able to use under canopy because if it. Waiting for colder weather :) Lights running: 55% Added a timelaps, hope you like it. If yes, I will try to make even better ones :)

The week has been going very well plants are reacting good to nutrients and seem to be happily growing , haven’t fiddled around too much this week as starting to get the hang of things slowly ! The grow so far has been quite smooth And haven’t run into any Major problems all plants have been topped and will continue lst throughout I believe they look quite healthy haha ? First timers luck 😉🤨 we hope so Good end to the week next week I shall trim and see how that goes Happy growing 💎

Kích nhựa + kích mùi max 2 ngày trước thu xả

Sooooo impressed with the size & quality of the buds😳 Super dense & sticky✂️ The smell is sweet fruity mix berries🤤🍓

day 52 update- the nutrient problem is apparently gone now and the buds keep growing so I did nothing special this week- The scrog mess is nicely covered with tails and there is not more burning issues.

Not a lot of grow photos this week since we were camping two days' into the backwoods at Temagemi this week :) I have added a video garden tours so you can see what's up this week. The fight against powdery mildew is real. But harvest time is here just in the nick of time!

SOME SEEDS ARE STARTING TO POP OPEN AFTER 1.5 DAYS SO I WILL PROBABLY BE PUTTING MOST OF THEM IN THE SOIL ON APRIL 23RD👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Start of week 9 Runtz Muffin got the cut this morning. Put the whole plant to hang dry, i just removed some of the bigger leaves, since plant grew really compact. Drying now for the first 3 days at 56% and 17C, after that 60% and 16C, for at least 8 days. Overall i was really pleased with this strain, Barneys did a great job and you can see their genetics are strong. I will give a weight, taste and smoke update/review once they dry up and got the trim. 10/10 recommended strain!

01/27/2021 Flowering going well Flowering #2,#3,#6 #6 is a week ahead of#2,#3 will put others in on week 4 for a staggered harvesting 01/30/2022 watered with fungal tea and some aloe mixed in for amino acids and other goodness. Well see how she progresses in 4 days Also working on some banana peel tea to give a boost of potassium if I do next week it should be available for week 6-7. Ps. Fuzzy Mellon (bag seed male) I will pollinate one lucky branch on #6 as she is my favorite. But number 3(tall and lanky one) will get pollination of one branch as well. I can't wait to see how they recombine with fuzzy melon smell mixed with burnt rubber and model glue and pine. #2 no pollination (smaller one) #5 (bonsai) and #8 are males. So 3 female out of 8 seeds. Going to make some feminized seeds next time,so I'll have plenty of female's for a staggard harvest.