Day 15 of flowering: reduced the Grow component to 2 ml/L to reduce N at the same time increased the ml of Micro, bloom components to 4 ml/L according to the Advanced Nutrients table Day 20 of flowering: I turned on the air conditioner to keep the temperature level at 23 C Watering volume week 8: Day 15 -21 - 500 ml per day

Guava Runtz – Week 11 (Fast Buds Outdoor 2026) Guava Runtz is done. She was harvested and lightly wet trimmed, then properly trimmed after drying. She is now in the jar for curing. Final dried weight came out at 34 g. Beautiful red colors throughout and a strong fruity smell that hits hard. Really happy with how she turned out.

Hey folks, I'm finally back at it again. It took me a while for a couple of reasons: 1) I usually only grow in the winter. 2) I completely revamped my grow room after the issues I ran into with the last setup. 3) It took me a while to brainstorm exactly what I wanted to do. I bought these seeds from D.C. Seeds and was very pleased with the experience. I'm very happy to give business to a fellow American and Veteran. I've only ever purchased seeds from the UK in the past and that experience has been "dodgy" to say the least (not the vendors fault, but the transit). I've only ever grown photo's, but chose to go with all auto's moving forward. After calculating the intensity of my current light, with it being on a 20/4 rotation I'm very close to hitting 40 moles per day, at least directly under the light. It doesn't quite cover my 2' x 5' trellis. I'll eventually upgrade my light, but auto's should get me the best bang for my buck with this light. Also, I spent a pretty penny building this new grow room. The other obvious reason for growing auto's is their shorter seed to harvest time. I've got a small grow area, and never plan on expanding. Theoretically, auto's will allow me to produce the most out of my room. A few things about my grow room: 1) I lined the whole closet with 1/2" plywood and put that piece of ply the air intake/outtake/power as the divider between each side of the closet 2) The grow room itself has ply on all wall surfaces so I could mount stuff to it and paint it 3) The other side of the closet is my storage/prep/power distribution/etc. area. Maybe I'll take a pic one of these days 4) My last grow my carbon filter/fan was venting into the other side of the closet. This created a headache for a number of reasons. I tapped a 4" hole through the floor and am now venting into my crawl space below the house. 5) I moved to bubbleponics to speed up my grows even more. I will be removing the drip system once the roots hit the water in the res. 6) The larger res. will hopefully make my life much easier. Late in the last grow I could only fit 3 gallons of water in the bucket and that sucker was pounding down at least a gallon a day. That required too much micro-managing for me (both ph and refills). 7) I no longer have a fixed trellis with chicken wire. The trellis is held in place by dowels that I can pull out by hand. The short sides of the trellis have hinges on the bottom, so I can fold it and pull it out easy-mode. Lastly, I'll be using string for the trellis so come harvest all I have to do is cut the string instead of dealing with trying not to destroy buds pulling them through chicken wire (it takes forever). 8) I built a light diffuser on the other side of the air intake 9) My res. is on a motorcycle lift I'm using a drill to move up and down I have now started using Jack's as my primary nutes. They tell you the full break-down of each macro and micro nute, giving me more control and understanding. I think House & Garden is a good product, but when stuff goes bad it's more difficult to troubleshoot when you have no idea what each piece of their full lineup contains. I'm assuming it's kind of a proprietary type thing, which I understand, but knowledge is power. I am still using their Drip Clean (while the bubbler is going) and Roots Excelurator Silver, both excellent products. I'm still using Hydroguard, and will FOREVER. I'm a true believer now of why Hydroguard is necessary for any hydro application, IMO. I also purchased water soluble fulvic acid, but have decided not to use it for this grow....or at least while the bubbler is going (I'll elaborate below). Ok...now that all that is out of the way.... I really wanted to use my well water instead of R/O to make my life easier. Soooo....I filled up my res., and put two seeds in the system immediately. Nothing happened after 1 1/2 weeks. I finally opened up the cubes and saw that the beans had popped, but it looked like maybe I drowned them, or they ddin't grow straight up or something. For round two, I didn't change the water out, and decided to soak the beans for 24 hours in R/O water first. I had the exact same problem. I'm still not really sure what happend, but I suspect it was the well water. My PPMs were sitting at ~500 with the well water, which was probably too spicy for the beans just starting. Also, my well water is questionable (even though it's at 165ppm), but I won't elaborate further....it's a long ass story and I've spent an absurd amount of money on it. Lastly, I did put the Fulvic acid in, and it was very messy. I really want to avoid having to clean my res. Once the roots get big it will be a real pain in the ass to clean. I'm leaning towards not using the Fulvic acid this grow just to see how things go. I had 10 beans total of the Sour Apple and have already ruined 4. So here's hoping third times the charm. So, I went back to my tried and true method: 0) R/O water for everything. Ditching the well water idea. 1) Soak beans in R/O water for 24 hours 2) Paper towel method between plates on a heating mat 3) Once the roots pop, I place them pointed down in the hole of the rockwool cube 4) Hand water once a day by dipping the cube in the pre-mix of 1/4 strength Jack's and everything else I've listed above. This put my PPMs at 300...a way more reasonable value for starts. It's been exactly 7 days since I followed the above. It's probably hard to see but the cotyledons came up, and multiple roots have come out the bottom of the cubes....way faster than I've ever seen since I started growing. That means even though I'm doing my old process this already shaved at least a week off of when I'd normally put it in my bucket in the past.

Grow diary 11 Stage 4 Days 31-40 Day 31 Turned power up to 85% on the mars hydro ts1000. Mines one of the old ones you need to stick a screw driver in to alter it. Day 36 Removed the single finger fan leaves and the 1st 3 fingered leaves. Day 39 Removed the 4 fan leaves from where she was topped last week. The start of this stage we hit a heat wave, day after day of heat. I had my humidifier on most of the 9 days. The tent didn't hit the temps I thought it would so that means I have my loft under a bit better control. The plant really kicked into gear this week, around day 34 she started to explode in growth. So far I have only done some lite defoliation by removing some of the 1st leaves that weren't getting any light anymore. The wedding glue went into pre flower before the rest of the grow, she looks like she might have slightly to much nitrogen or that could just be the colours she is going to show. She 3rd nicest at the moment. TEMP Max 32.2 Avg 26.5 Min 21.9 Humid Max 71.2% Avg 58.4% Min 50.3% VPD Max 2.32 Avg 1.44 Min 0.85

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 1/15/22 😻Week 5 of veg and things are looking good! I didn't know how I wanted to train these so my husband's suggested we top 2 plants and low-stress the other 2.. I went a little too heavy with their last feeding, no burned tips yet but 2 of them are very dark, we'll be doing water only for these this week..there is some minor discoloration on a couple of the lower leaves nothing major but something we're watching..we'll update again midweek..thanks for all the love Growmies ❤️🌱 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 1/18/22 Things are good 😺👌..New growth seems to be coming in fast on the 2 plants we topped...much faster growth than we've seen up to this point..all plants seem happy and all have a great color (after working out my slight overfeeding )..we've been running the MarsHydro near the top of the tent the entire grow as a test and its still more than adequate. .we don't have a light meter but we do have some crazy tight node spacing to confirm lol...I still say these plants are a little on the small side but they seem to be growing faster now..I'm pretty sure leaving them rootbound in cups didn't help their development...I think they're finally becoming adjusted to their new homes and we'll see some explosive growth in the coming week 💡🌱... fingers crossed 😺🤞 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 01/19/22 AHHHHHH!!! I DID IT AGAIN!! Kicked my timer power after watering yesterday and put these into about 14hrs of darkness 😥.. lights are back on, hopefully they didn't notice lol.. ah well these things happen and I'm sure they'll be just fine ❤️🌱 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~

Bueno , este es el segundo cultivo que realizó del la cepa "Waka" , el anterior lo tengo igualmente documentado en otro diario . en esta ocasión cultivamos los clones que habíamos recolectado del cultivo pasado , guardando los fenotipos que nos gustaron más y los clones restantes los pasamos a floración que fueron los que se le hizo seguimiento en este diario. El crecimiento fue bastante explosivo y reaccionaron muy bien a cada trasplante realizado . pude observar que los clones de cada fenotipo seleccionado se desarrolló con mucha similitud al de sus madres . El olor en vegetación es bastante discreto y en floración se pone un más intenso El desarrollo en floración fue explosivo generando bastante resina y se vieron muy hambientras . Al fumar se puede sentir un rico toque cítrico en las N° 4 se siente un fuerte sabor a limón en algunas flores mucho mas marcado que en otras, N° 3 y 13 un agradable toque a naranjas muy rico de sentir en el paladar , La N° 8 con pizcas dulces bastante interesantes. El humo al fumar es muy suave lo que permite sentir mejor el sabor de cada fenotipo.- saludos y buenos humos😉 Al momento de cosechar se cortaron los clone y se dejo secando en oscuridad a temperatura ambiente por cerca de 16 días posterior a eso se pasó a curar en frascos

Salut les Growmies Nouvelle semaine de croissance , nouvelle coupe d'apex. Les filles vont bien et sont en pleine forme. le rempotage a accéléré leur croissance.Au regard de l evolution je pense les passer en floraison d ici deux semaines

12/16 - Howdy there, growers. Here we are at the start of week 11 for this lady. Day 77 from seed. She still have a little ways to go, but she is coming along quite nicely. Buds are stacked and rock hard and getting frostier by the day. I'm trying not to rush this one. I removed the Pro-TeKt from her regimen as she isn't growing anymore. I switched her feed over to ~1.0ec (500ppm) to taper her down during her last two weeks. I am also going to taper the lighting schedule down as we approach chop on her once her sister is no longer in the tent. Thanks for checking out the garden, and, as always, Happy Growing!

Did the flush a day later then planned due to waiting on a mini pump to help with removing the water from dishes. Stoked to start week 4 of flower day 23 of flower. Colors and smells are coming in really nicely end of week 4. Wow I smell POG and guava when I dig into the flowers. From a distance it smells like skunk or roadkill. Awesome .

🤩🤩

Alle 4 Pflanzen stehen im Zelt die 4 feminisierten in einem kleinen Gewächshaus, die 2 Autos im Endtopf.

-Strain: Purple Lemonade - Fast Buds -Tent: 5x5 Gorilla Grow Tent -Lights: Budget LED Grow Lights 2 x 250 Watt LED Full Spec/Red Spec mixed boards -Light Cycle: 18/6 -Soil: Fox Farm -Air Circulation: AC Infinity Cloudline T4 Inline Duct Fan WECLOME BACK GROWMIES! Week 8 here with our PURPLE LEMONADE by Fast Buds! January 14, 2020 (DAY 52) - Hey there growmies sorry for the one and only update this week, i got sick and just cant do it. i hope you all understand. 01/14/2020

Récolte au 53ème jour de floraison

with great thanks to Zamnesia and plagron

Long time no see. Today i had to refill the system because my lady was very thirsty. She‘s looking beautiful. And for my first time dwc run im very proud so far. Have a nice day guys 😊🏻

segunda semana de 12/12. algumas noites frias mas ela está bem. seguimos nessa