Likes
Comments
Share
@DevilsBud
Follow
New week for the 2nd grow In the new marshydro set-up Enjoy the video be warned it can get LOUD 😉 there all looking amazing in there own way for separate details per plant go to there diaries 🤘🏻 I believe the new FC-4800 wel i KNOW This lamp is out of this world for sure it will get your so frosty so quick i was afraid i did something wrong lol nah she is just a absolute BEAST . AND THE 120X120X200 TENT Is great for the grow that have going on now there snug like bug in there no netting needed 🤘🏻 the control of heat and humidity is easy as can be winter is my time to grow no problem what so ever visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
32
Share
COMMENTED BY MadeInGermany MadeInGermany 5 minutes ago Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 49 since time change to 12/12 h. Hey everyone :-). We are slowly getting closer to the last few weeks :-) There are still 2-3 weeks and The buds develop very well towards the end :-). It is slowly starting to use up its nutrients. This week it was poured 3 times with 1 l each time. Everything was cleaned and checked. Have fun with the update. Stay healthy 👍 You can buy this Strain at : www.Zamnesia.com Type: Runtz ☝️🏼 Genetics: Zkittlez x Gelato 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡💡☝️🏼 Soil : Bio Bizz Coco ☝️🏼 Nutrients : Green House Seeds Company Powder Feeding Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8
Likes
Comments
Share
@edezfer
Follow
No buds formed; the calyxes where the seed goes were created, but without seeds
Likes
26
Share
Likes
25
Share
@MaxMo8
Follow
I admire this plant, wonderful and calm growing
Likes
40
Share
ce jour 27:11:2021 j'ai pratiqué au peut de défoliation mais j'ai malheureusement cassé une branche vue le stade de développement je pense tenté la bouture mais j'ai des doute car bien abimé 👍Description White Widow Automatic Female Cannabis Seeds Hybrid. (Brazilian Sativa x South Indian) x NL Special x Afghan Lowryder. Fast, robust and very frosty. Earthy, hash-like aroma and taste. By crossbreeding our original White Widow with NL Special and Afghan Lowryder, we created White Widow Automatic. This autoflowering variety has a short life cycle and provides above average yields that are covered in frost. Its NL Special heritage also ensures that this strain is well prepared for growing outdoors in colder climates. As with our other autoflowering strains White Widow Automatic is short and bushy and grows one main cola with a couple of side branches. From about half way through flowering she will be covered in frost, making sure that even the smaller buds are potent. This strain can go from seed to harvest in 9 weeks, but will usually take around 11. Outdoors White Widow Auto can reach a height of around 150 cm and yield up to 85 grams per plant. Optimal indoor yields were obtained under a 18/6 light cycle. She has an earthy, hash-like incense aroma and taste. This hybrid variety has a strong indica effect and provides a potent, couch-locking body stone. Medicinally, White Widow Automatic is highly effective against stress and depression and chronic pain. https://marshydro.eu/products/100x100x180cm-grow-tent/ https://marshydro.eu/collections/ts-series/products/ts-1000/
Likes
4
Share
She is such a beautiful strain to grow,her aroma it's just so amazing like pure mango,it's just like fruit,can't wait to try her,I'm in love with her Aroma and this feno particularly it's purple so I'm very excited,let's see how she keeps developing on her 4th week
Likes
11
Share
@CocoLogic
Follow
Sept 27th: (F41) Fertigation once a day with NEW recipe (1300 EC 6.1 PH) watered until 10-20% run-off Sept 28th: (F42) Fertigation once a day with same recipe (1300 EC 6.1 PH) watered until 10-20% run-off Sept 29th: (F43) Fertigation once a day with NEW recipe (1300 EC 6.1 PH) watered until 10-20% run-off Sept 30th: (F44) Fertigation once a day with same recipe (1300 EC 6.1 PH) watered until 10-20% run-off Oct 1st: (F45) Fertigation once a day with same recipe (1300 EC 6.1 PH) watered until 10-20% run-off Oct 2nd: (F46) Fertigation once a day with same recipe (1300 EC 6.1 PH) watered until 10-20% run-off Oct 3rd: (F47) Fertigation once a day with same recipe (1300 EC 6.1 PH) watered until 10-20% run-off Note: The TUT bud are getting quite heavy :) Some branches are bending, will have to tight some of those :)
Likes
4
Share
@blaze_fpv
Follow
Start of Week 3 flower | cut only 2-3 leaves blocking light | stretch is done End of Week 3 flower l gave them another light defoliation to have the whole canopy reaching light | buds really start to form rapidly | smell is also really nice Currently running : 28° C at 50% rlf 630 - 750 ppfd 1200ppm CO2
Likes
22
Share
@Ferenc
Follow
FBT-29 and FBT-31 - Strawberry Pie will.be harvested next week. In the tent temperature is so.high because of summer poor plants are suffering. I keep removing leaves.
Likes
14
Share
@AndrewC
Follow
So this is the Tear Down week. The timing of it makes it so i will need to the harvest flag in a few days when I can weight and test the plants. I have included the Cleaning, and Cutting and some Root Porn. I will make the harvest post in about 4-5 days, when I can trim these plants. There is a lot of Plant here. I got way more than I was expecting. I don't have a scale that measure this amount of plant, without taking like 10 measurements and then adding them together. So I will just be posting the dry weight. I will post the wet weight as dry weight * 1.65. Autopots: Wow, what a great product. I have been blown away by how well and how easy it was to work with them. They really did solve the watering issues. Excellent product. If you are a beginner, start with Autopots. -= Lessons Learnt =- - Overdrive the air to your Autopots. In my control plant, I used a small rectangle air stone (instead of a standard air dome). This lead to root rot and some other issues, it also put significantly less air into the water. The root rot, give the material for the Brown Algae to grow. Using a huge Air-disc-Air-Stone would be an excellent combo to mix in with the air dome itself. Something like this: https://www.amazon.ca/Pawfly-Diffuser-Suction-Hydroponics-Aquarium/dp/B01MY3AQ33 at the bottom and the air-dome on top of it, will be what I do with my next experiment. - Air stone in the reservoir. I had two instances where algae grew into the res. An air stone would have helped. It would have also helped my control plant get less root rot. Given the amount that the air-domes and air sources got engulfed, having the water have more o2 in it would have only been beneficial. - Don't grow 6 plants in a 4x4. Since my control plant was about 1/8th the size of the others, I think I could have grown 5 in the shape of a 5 (on a 6 sided dice)⚄ This placement would give a much more spaced canopy for airflow and more importantly light. The sides of some of the plants were lighter green and produced larf due to lack of light penetration. - This tent was on 19-5 schedule. This worked out very well for this strain. After every lights on, they were in the praying position, so this strain was able to recover in that 5hrs off. If I had more seeds, I would run these again, and try 20-4. I think this strain could handle it. All for all, I think I'm going to 19-5 as my default timing. This kept up a solid DLI. - Staring at .9EC (really .7 EC cause my water here is .2 EC) Then bumping up at .1 a week, until 1.6EC worked out VERY well. I experimented on this crop all the way up to 1.9EC, which burnt the tips of this plant. I think if I did this strain again, I would do 1.6EC until 3-4 weeks left then crank it to 1.9. It did plump them up when I went to 1.9, however it left them looking rough. Bulk was added though. - Sticking to 6.0PH for all of veg, and 2 weeks into flower worked great. The plant had solid and consistent color and leaf shape . The plant's did get hurt, due to some issues (as noted on the weeks). I switched to 6.5 PH in the last 3-4 weeks and it helped them recover, and plump up noticeably. -VPD. The #1 thing I focused on was VPD. I keep it .9kpa range, as best as humanly possible. It was honestly, HUGELY noticeable compared to my other grows. I know truly understand the value of properly dialed in VPD. This is the one lesson that will stick with me forever. - Super-cropping: On the plants I give the chiropractic treatment too, had much thicker stems as much larger channel internally. I did this treatment to 4 of the 6, and the 4 that had it done has larger buds and recovered from defoliation faster. TLDR; VPD is king. Super-cropping is worth the time. Keeping PH and EC dialed in were all wins. Autopots kick ass.
Likes
17
Share
Hi friends! I decreased the amount of nutrients given because I realized, much to my deep frustration and sadness, that almost since the beginning of flowering I've been giving her too little nutrients. The chart says "x ml per liter of water" and I was just giving nutrients as if it was only 1L, the rest I just filled with plain water. So the poor thing is probably hungry for nutrients ever since she started needing more than 1 liter of water, and that may have affected the yield. Another thing, honestly, could you tell me what you think of her? I think I'm wasting the seed's potential, I think she could be bigger. But with 8-9 hours of direct sunlight per day, strong winds, and now this nutrient problem... :/ Well, I'll rectify the nutrients and let's wait!
Likes
25
Share
right in 2nd week of flower and they have lost their smell? prob because it is so dry and they have started flowering. I gave them bloom amendments last week. lets see if they are in a better place next time i see them. These were clones from a grow buddy but it looks like the pheno was not really deserving of cloning. hope it smokes well.
Likes
4
Share
@Steek88
Follow
Do I just keep doing what binding until the pistols all turn brown.
Likes
6
Share
@Weedzoks
Follow
La floraison a été lancé le 24 Août/Jour 88 Jour 85: Arrosage engrais complets Flo 1: Arrosage eau seulement Flo 7: Pulvérisation de 3ml de Vita Race
Processing
Likes
6
Share
@Flydope21
Follow
Week 2 veg. Starting some LST this week. Pretty new to this so hopefully all goes well!
Likes
7
Share
Likes
27
Share
@Dedon
Follow
Hi ! 😎 I'm really impressed by theses plants, they are in stretch phase and they grow so fast 😵 i'm a bit worried about their final height xD this is massive plants for a GT205 😆 i should've put only 1 plant by tank . i cut some leaves so the light can penetrate more ( it was very bushy before ) and to decrease humidity ( leaves were always wet during light time ) They are stil drinking a lot ! i have to add 10L on each tank each 2 days ! 💪💪 i guess they'll take another 15/20 cm during the next week xD i'll have to up the lamp and maybe put the fan outside the tent to get more space See you next week 🙏
Likes
15
Share
This plant has been a joy to grow, she’s super frosty and fairly dense. I’ve trimmed and put in jars to cure. Not tried yet will give another week in jar then try a wake and bake with it.