Getting a little sticky and stinky. She took the lower branch removal well and has continued in her stretch.

Welcome to Flower week 9 and harvest of Fast Buds LemonPaya For this Project , I’ve chosen the Feminized Photo strain Lemonpaya : Here’s what I’m worked with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Fast buds • 💧 Humidity Range: 35 • ⏳ Flowering Time: 58 Days • Strain Info: 30%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 16l • Nutrient Brand: Narcos • ⚡ Lights : 600W x 2 A huge thank you to Fast Buds for allowing me to try my Best with this amazing collection from Automatic and Photo Strains they managed to Sponsore . Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!

Die wahrscheinlich letzte Woche der 1. Lady beginnt. Die beiden anderen Ladys hängen deutlich zurück aber ich schenke ihnen gerne die zusätzliche Zeit und Pflege. Gedüngt wurde ganz normal nach schema, zusätzlich bekommt meine calmag Lady nun das 2. Mal calmag vielleicht fängt sie sich auch noch. Samstag 15.06.24 Die erste Lady wurde heute geerntet und zum trocknen in den dafür vorbereiten Schrank gehangen, ich entscheide mich hier für die Dry Trim Methode weshalb ich sie noch nicht weiter verarbeitet habe.

The plants are ranging from 36”-38”…. We just purchased Flower Fuel for the buds. And pruned all the plants this week. Lastly we gave the plants pH balanced water with loranne flavor extract and unsulfured molasses.

Nachdem ich ein paar Triebe aus Versehen abbrach, lies ich vergangene Woche die Pflanzen in ruhe. Mittlerweile war alles zugewuchert, weshalb ich mich dazu entschloss, einige Blätter zu entfernen und mit etwas LST zu starten um die Pflanzen auf das kommende SCROG´ing vorzubereiten

So, I threw out Fruit Diesel and Bruce Banner because of insufficient development. I still made a mistake, it is better to plant 4 plants under such a lamp, but not 6. I installed a dehumidifier, the humidity reaches 60% - no more. All the same, in a hot climate air conditioning to reduce humidity is not possible.

The ladies have almost reached 40 cm in height, so we are switching to the flowering stage. For the next two weeks, they will receive fish mix before I switch to Biobizz Bio Grow.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

- Big Bud + Overdrive

Girls are healthy and juicy,getting ready for the light switching,changing pots and also some defo probably 💚🌱

~ WEDDING CHEESECAKE FAST FLOWER by FastBuds ~ Well fam, here we go again with another epic strain from FastBuds Fast Flowering stable. After having such tremendous success growing their Gorilla Cookies Fast Flower outdoors last year, I've decided to run another of their fast flowering strains outdoors this year... Wedding Cheesecake Fast Flower! The best description of this awesome cultivar comes directly from my friends at FastBuds which is as follows: "A delight for the mind and body: Wedding Cheesecake FF (Fast-Flowering) is a delicious strain that offers XXL yields in a 7-8 weeks flowering cycle. This terpene powerhouse produces loads and loads of mouth-watering vanilla-creamy-cookie-scented terps with hints of citrus and cinnamon. In addition to its delicious aromas, this variety grows very well in both indoor and outdoor setups, yielding up to 650 g/m2 without extra maintenance, making it the ideal strain for beginners as it allows you to maximize yields while minimizing work. This super-fast feminized photoperiod version offers upbeat and energetic yet deeply relaxing effects that are perfect for consumers looking for a heavily focused, motivating, and creative high. It’s the ideal strain for those needing that extra energy boost to start a busy day on the right foot. Wedding Cheesecake FF boasts chunky, large-sized buds with a thick layer of silvery-white resin and bright orange hairs scattered all over: that just screams ‘quality’. The lime-green flowers sparkle with an array of hues ranging from dark to light green, to magenta and purple, and reek of a delicious aroma that’ll remind you of fresh store-bought cheesecake. This is an XXL hybrid that grows extremely tall in height, reaching up to 3m with one huge main cola and multiple long side branches that can withstand enormous yields of up to 650 g/m2 with ease. Wedding Cheesecake FF is extremely resilient to the elements and can be grown in almost every climate as long as you’ve got the space and basics covered, making her an excellent choice for those looking for large-scale harvests with a quick turnaround time without much effort." ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: This is going to be an outdoor grow, but I have started the Wedding Cheesecake FF indoors as our weather is still too cold to put her outside (nighttime temp's dipping regularly into the 30's℉). The plan is simple... let her grow inside under a 19/5 light schedule until the nighttime temperatures stay above the mid 40's℉, at which point she'll be moved outside and transplanted into the soil which I have already setup and inoculated with beneficial microbes, and then let the fun begin!🤪💚 ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 3/28- Day one for the FastBuds Wedding Cheesecake FF! I initially soaked the seed in lukewarm tap water for 24 hours, at which time the shell had split and a root tip was visible. I then transferred the seed to a pre-soaked peat pellet which was placed in a 1.5"x1.5" plastic seedling pot which was set into the bottom half of a Solo cup that I cut in half. 3/30- As soon as I could see a root beginning to emerge from the peat pellet I transferred the pellet, that I first coated with Extreme Gardening's MYCOS, into a Solo cup that had a 70/30 Coco/Perlite mix that was pre-amended with Gaia Green 4-4-4 slow release dry amendment, along with wiggle worm castings. After placing the Wedding Cheesecake FF in the cup, I watered it in and placed a humidity dome over it to ensure that it stayed in a relatively moist environment as it gets acclimated to its new 'temporary home'. 4/1- The Wedding Cheesecake FF has taken right to her Solo cup and is looking stress free. Her vigor and color are both exceptional as well! 4/3- Well there's the first week for this little girl. Stay tuned in the coming weeks, especially when she gets moved outside and really starts to take off. I can't wait... can you? Thank you for checking out my diary, your positive comments and support make it all worthwhile! 💚Growers Love!💚😎🙏

10 Wochen sind rum und die Fat Banana hängt jetzt zum Trocknen, ich rechne damit, sie in 5-6 Tagen ins Glas schneiden zu können. Bin schon sehr gespannt, wie viel ich rausbekommen habe, es riecht jedenfalls sehr fruchtig, wie nach Multivitamin Bonbons, mal sehen ob sie nach dem Trocknen auch noch so riecht. Fat Banana Auto von RQS gehört zu meinem ersten Tagebuch, das ich auf Growdiaries gestartet habe. Leider wird das komplette Tagebuch nicht angezeigt, in dem ich Fat Banana, Cookies Gelato und Green Gelato zeige, warum auch immer, selbst der Support konnte mir nicht helfen 🤷🏻‍♂️ Naja deswegen dachte ich mir, ich lasse euch teilhaben an dem Tagebuch und habe die Bilder von vor 2 Jahren aus dem alten Tagebuch hochgeladen. Sie war wirklich sehr angenehm zu Rauchen und ich werde sie wohl bald mal wieder machen 😊

WEEK #22 - SLOW AS A DEAD SNAIL First, i downscaled the photos and used the affinity standard balance filters. Do the photos look better now? Maaan, either i have problems with my eyes or nothing is happening. Well, nothing but shitty, crispy leaves on Slush Mint Cake, although i have watered a bit more the last days. Have i done something wrong on the final stretch? Seems like it. Might be "stress" from switching brand of fertilizer last minute, maybe pH off/a bit too low (seems like sub 6.0 1 or 2 times), or not watering enough the weeks before and now the plants are just too senior with small-ish buds. Or do YOU know any reasons for that? Next run will be just standard max. topping. As SMC will be harvested somewhat soonish (likely a few buds each day in the upcoming week - depending on how much time i have to spare) i took a bunch of photos and details (let's see what the maximum capacity of GD is 😇), however again no real progress in amber trichomes. You've got me stumped. SMC: Took a little test nugget during last week, and another one today. The smell ist still super delicious: fresh-lemony-sweet-frutiness. And the blossoms just do look pretty pretty. 😍 Skywalker: Your time will come! SUPPOSED duration of bloom: Skywalker 9-10 weeks / SMC 8-9 weeks IS: 12 weeks ..and the calyxes of SMC do look prety decent, although not thickest buds. Next update might be a harvest post!

The forecast delivered, eventually 😁 After two weeks of cold, grey, the sun finally showed up properly toward the end of the week. Temperatures pushing 19°C, real light, the kind that actually does something. About time!! The plants are small for their age, a week ​​​​​​​​​​​​​​​​more or less lost to cold and low light. That’s outdoor growing though, you take what the weather gives you… 7 to 8 cm above the substrate at J21, stems still pretty thin, third node just starting to push through. I may also have started nutrients a bit late. They never looked deficient, leaves were just sitting at a light green, which at that age could simply be normal. But with a substrate this low in nutrients, almost inert really, I probably could have introduced Bio Vega a bit earlier than I did. First feeds with Bio Vega this week at 1.2 ml/L, with Rhizotonic at 2 ml/L. Mid week I also threw some azos at 1 tbsp/10l, figured it couldn’t hurt to give them a little extra love. It’s a root stimulator, helps with nutrient uptake too, so why not. On the last day I bumped Bio Vega up to 2.25 ml/L, following the fastbuds feeding schedule. Being organic, the burn risk stays low even at that dose, so worth pushing it. The Skunk is sitting above a layer of BatMix though, so I’ll keep a closer eye on her as the roots start reaching down. By J21 the leaves seemed a shade deeper than the pale green of the previous week. Could be the feeding starting to land, could just be the plant finding its feet. Probably both. We’ll stay on this dose and see. The deadline is July 16th. That’s not a lot of runway. But the 10 day forecast is showing a lot of sunshine and highs around 30°C. If there was ever a moment for these three babies to wake up and start moving, this is it ! ​​

.

Woche 3 Das Fundament wird gelegt und Umtopfen steht an. Der Regenbogen ist in der dritten Woche seines Lebens. Die ersten Seitentriebie bilden sich und die Pflanze ist gesund gewachsen mitlerweile hat sie 3 Nodien. Und ist über ihren Cube hinausgewachsen und hat diesen kräftig durchwurzelt. Somit wird jetzt in den 3l Stofftopf umgepflanzt. Danach gibt es zum ersten Mal die standart Düngedosis, angepasst an das Pflanzenbild 2,5 -5ml Hesi TNT für ordentlich Nährstoffe im Wachstum, 5 ml/l Hesi Root für eine kräftige Wurzelentwicklung und 2 ml/l Calmag, um unser Osmosewasser aufzuhärten. Der DLI wurde auf im Laufe der Woche auf 40 erhöht. * Zustand der Pflanze: Die ersten "echten" Blätter sind vollständig entwickelt und wie durch die EasyCubes zeigt sich wie eine kräftige Wurzelbildung. * Wichtige Ereignisse: Beginn der Nährstoffgabe. Anhebung des DLI. Umtopfen in 3L Stofftopf * Düngung & Messwerte: * Gießwasser: pH ca. 6,0. Leitwert ca.1,4 - 2 S. * Drain: Wir messen sporadisch, um die Abweichung von +/- 500 S einzuhalten. * Anpassungen: Wir sind überrascht wie gut sich die Pflannze im Easys Plug System entwickelt hat.

I'm wanting to replace all my miscellaneous lights with another quantum bar rig before my Fall grow this year. Anybody want to buy some gently used lighting gear this summer???😁😎 👉 2 x 100w Cree CXB3590 (3500k) with pin heatsinks - 3 grows usage 👉 1 x 100w Citizen Clu048 COB (3500k) with pin heatsink - 3 grows usage 👉 1 x 120w DIY quantum board (3000k) 256 x LM301b's - no heatsink - used for 2 grows 👉 1 x 60w Bridgelux COB (3500k) - Par38 style - used for 1 day (a back-up bulb) 👉 1 x Morsen 2000w (367w actual) blurple with a bank of 1/6 of the 200 LEDs not working - used 3 grows 👉 1 x Morsen 2000w (367w actual) blurple with only my current grow in use (the replacement) 👉 1 x HeroLight 1500w (285w actual) 5 x COB full spectrum (pinkish-white) - 2 veg stage uses 👉 4 x 36w Par38 type deep red (660nm) bulbs - 3 grows usage 👉 2 x 25w 225 LED panels (660nm) - 3 grows usage 👉 2 x 25w 225 LED panels (440nm) 4 veg stage uses 👉 2 x 25w 225 LED panels (440nm) 👉 1 x 50w 225 LED panel (6500k+440nm) 👉 1 x 20w Par38 style Cree COB (3000k) - (more like a 40w) - used for a week 👉 1 x 15w Sansi blurple Par38 type bulb - used 1 day only 👉 1 x 40w Sansi 4000k daylight Par38 type bulb - used during germination only 👉 4 x 12w MiracleLED red spectrum (4000k daylight + 700nm red) regular light bulb - used during flowering in 2 grows Just hit me up in chat if you are interested in anything- ============================================ SUNDAY 3/31: I foliar fed them a few times, rotated them and took some photos. Still trying to tweak the lighting timers for optimal flowering temperatures. Getting closer to perfect... MONDAY: Spun them around and foliar fed a few times TUESDAY: I fed them about 3/4 gallon each and started them on Open Sesame and Tiger Bloom. Foliar fed a few times and tweaked the timers again.. WEDNESDAY: I foliar fed a few times and rotated them, then took some photos. They are both stretching well now.👍 THURSDAY: Tina is an Amazonian Warrior, tasked with protecting Tanya, the Princess. Killer flora for sure. I foliar fed them a few times and rotated them 180 degrees. FRIDAY: I watered them with about a half-gallon each including boomerang, bud candy, calimagic, kelp me kelp you, terpinator, and armor si. I also foliar fed them a few times and rotated them. Temps in their tent are stable and acceptable.👍