**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8

This week went well. After transplanting the Sour Diesel grew pretty quick. In another few weeks I will have to transplant into a a 2 or 3 gallon fabric pot. So far so good....talk to you next week.

Day 77-84 (April 17th-24th) (Day 78) I honestly cant believe I’ve been vegging this long. The growth for almost 80 days of veg is laughable. I’ve compiled a little list of what has gone wrong so far. - I added too much glacial moraine which made the soil too water retentive - I’ve been foliar feeding too much kelp - I gave too many bloom nutrients for a plant in veg - EDIT: DID NOT WATER ENOUGH AT ONCE The plants have been drooping like crazy this past week and I’m going to try watering in a full gallon per plant. I first thought it was from the medium not drying out enough, soil compaction ect. and I’m sure those are definitely areas where my soil mix could improve but the bottom of the container is pretty damn dry. I could actually be under watering despite soaking the top with 500ml a day. I’m going to sit the pots on some plastic sheeting so they don’t evaporate as much from the bottom and water in a full gallon each making sure I get some runoff. I was going to wait until I get my air pump but fuck it, it’s coming tomorrow afternoon. The pots are so big that they’re not fully wetting to the bottom even with a gallon. I’m going to try to water in a gallon every 4 days while keeping the top soil moist with the sprayer. In hindsight 6 plants in 5-7 gallon pots would be the most ideal. (Day 79) Holy fuck did a full gallon watering make a difference. I should have been doing this the whole time. All 4 plants are praying and stretching upward like crazy. They just look more vigorous and happy within a day. I bet they will be even happier with that supplemental air. If things stay this smooth I should be able to flip around day 84, possibly earlier. Got my air pump in the mail today. This is kind of a shot in the dark so hopefully it works. It’s super loud and vibrates like crazy. First I’m going to try running it 24/7 and see if there is any improvement over the next few days. If it does work, I’ll try running it on my humidity controller so it’s not constantly humming and will only turn on when the humidity is high. I’m going to turn the night time temps down to 70f to prevent root problems now that I’m watering much bigger amounts less frequently and it’s getting warmer during the day. (Day 81/Day 1F) Ever since I’ve been watering in the proper amounts I have seen an absolute explosion in growth. I’ve decided to flip today, now that I’m confident my soil mix isn’t completely fucked. I might run into some N/mg problems during the stretch so I will make sure to give a final foliar feeding around the end of week 1. (Day 3F) So I’m literally seeing dwc growth rates now. Plants have grown more in the last 5 days than the last 3 weeks. If I had stayed at this pace of growth since day 1, I would have an 8 foot tall plant or I would be halfway through flower already. Oh well. Good learning experience. *grits teeth* I’m going to put up the second layer of trellis before these girls stretch out of control. Bbb#3 is seriously stretchy and will likely more than double in size in the next 2 weeks. The other 4 are all quite stout and bushy. I’m giving a light, preemptive defoliation each day and picking off some of the lower sucker branches. I will do a full strip around day 21F.

Purtroppo il mio telefono non riusciva più a caricarsi e per 2 settimane ho avuto un altro telefono in cui non avevo foto per caricare e quindi per fortuna ora ho risolto finalmente!!! Ho saltato una settimana e per questa gorilla cookies ancora qualche giorno e verrà tagliata!!! Sono stato 5 giorni via e loro hanno subito più stress idrico di quanto pensavo ma va bene così, avendo avuto meno acqua del previsto le ragazze hanno prodotto più resina ed emanano un profumo spaziale!!! La Purple Lemonade e la pianta del mio seme sono state tagliate questa mattina!!! 💥💯🎶

Ec 1.5 ph 5.8 lampada 30/40cm

Not much resin yet, maybe next week. A little bit of smell already, mostly veg/plant smell though. All in all, I think it's going pretty well.

Week 2: Day 9 Update 🌱 Sup fellas, My cuties are off to a fantastic start. While they've only grown a couple of cm in height, fresh new pairs of leaves are coming in strong now. Imo, they look really solid for day 9 and ready to take off. They're responding well to the Canna Coco A + B and Rhizotonic nutrients. Been doing the last 4 grows with Canna and my plants always loved it. Never had any issues at all. Also I made a big upgrade this week and finally got my hands on a new SF Exhaust fan with speed control and overall more power. It was about time. Airflow in the tent is much better now and it's more spacious overall since i placed the fan itself outside the box. My lights are at 50% now, and I'll be increasing them by at least 10% per week from here on out. Also upping the water amounts gradually, aiming for ~ 300ml per plant by the end of week 2. I always prefer to stay on the lower side until week 4-5. Update Day 11: My babies are growing really well. Also, my new Spiderfarmer Humidifier arrived yesterday and I love it. Makes the growing conditions even better. Update Day 13: Plants progress is on track. Super satisified so far. Can't wait for the 3rd week. More updates to come! 🍀🔥

There it is . My Red poison auto Original and My other seeds by bulk packs. Totally three plants of weed. oh yeah baby My cellphone did that

Growing well!!! Good progress this week.

Before drying, she smelled a little spicy, after drying, she just smells sweet & creamy, amazing smell. Her taste while smoking is insane, it really tastes like you took a spoon of some berry-orange type of ice cream, no spicyness, just bare candy terps. The buds are rock solid and she is covered in frost. Opening the jars is like sticking your nose in a bag of candy. Her effects are relaxing, she really makes you stoned, beautiful night time smoke

Went on a ski trip didn’t get to upload last week. Flipped Pineapple Express Pheno 3 today so it got 77 days of veg compared to all the others that got 60 days of veg.

Ho aggiunto una sweet zkittlez di sweet seeds e una big devil che porterò fuori. Non ho messo le targhette quindi non so ancora quali sono le Big Devil XL e le Jerry Bear 😥

What’s up guys! First time growing and I will be growing an auto white widow. I started Germination 3/4/20 and dropped it in roots organic soil in a 3 gallon pot. Any recommendations on proper temperature and humidity levels for the next week or so. Along with proper water timings, I know it’s best when slightly dry but anybody got an average of hours on hand that work best? Thanks for tuning in and hope to see you guys follow along and help me grow !

Dear diary, Week 10 total and week 1 of flower is behind us. Will just be making sure all tops are exposed and somewhat in the right place as I let them stretch for about 21 days before some defoliation. 🌸🌸🌸🌸🌸🌸🌸🌸🌸🌸 ⏰ Day 67: Feeding was given in the evening with a solution of 1.87ms and pH of 5.6. During this feeding, I guided most of the tops into their designated positions within the net, ensuring they are adequately spread out to receive optimal light. I also checked the runoff, which measured 2.3ms, but considering the extra dissolved salts from full draining and collection that would be higher that it really is, I will aim to bring it back to the desired range of 1.65-1.7ms to be sure. ⏰ Day 68: In the evening, the plants were fed with a solution of 1.64ms at a pH of 5.8. ⏰ Day 69: Evening feeding consisted of a solution with 1.66ms strength and a pH of 5.9. I also took the opportunity to confirm that the lights were positioned at a 48cm distance from the canopy. Additionally, I'm testing the exhaust system by venting it outside the room. Currently, the relative humidity (RH) ranges from 53-55% during lights-off and 58-60% during lights-on, while the temperatures remain around 18°C with lights off and 23.5°C with lights on. These conditions fall within the desired vPD (vapor pressure deficit) range of 0.95-1.2. ⏰ Day 70: Feeding was carried out in the evening using a solution with a strength of 1.66ms and a pH of 5.9. To enhance air circulation, I added a fan at the top of the tent. Furthermore, I checked the light intensity, which measured around 760-780ppfd. ⏰ Day 71: During the evening feeding, the plants received a solution with a strength of 1.64ms and a pH of 6.4. The RH levels range from 55-65% as the girls get more bushy, while temperatures vary between 23-18°C, depending on whether the lights are on or off. ⏰ Day 72: Evening feeding included a solution with 1.64ms strength and a pH of 6.4. ⏰ Day 73: The plants were fed with a solution having a strength of 1.66ms and a pH of 6.0. As indicated by the feeding schedule, the A+B mix was increased to 3.5ml/l. I also ensured that the lights were positioned approximately 50cm above the canopy and set to 90% intensity to provide additional heat.

Ever so slight nutrient burn. This is somewhat expected as I am giving a very high N-P-K. 4-35-26. Ph is around 6.4-6.5 I will try to get it a little lower for it's remaining days

Flowering day 44 since time change to 12 / 12 h Hey guys :-) The buds are becoming incredibly beautiful and smelling better and better ☺️. Today there was again the full load of food and will be slowly driven down as soon as it comes to an end :-) Was watered 3 times a week with 1.2 l each (nutrients see table above) Otherwise everything was cleaned. Have fun and stay healthy 💚💚💚 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 A thank you for this wonderful strain goes out to Herzog https://instagram.com/herzog030?utm_medium=copy_link and the Exotic Seeds team You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. You can buy this Strain at : https://www.exoticseed.eu/ Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼 MadeInGermany

Flores vigorosas y bastante resinosas, se puede ya sentir un agradable aroma desde las skunk y las big bud, las Prozack van un poco más atrás pero aun les queda más floración que las demás. Muy sanas y bastante ramificadas!.