Likes
Comments
Share
@DevilsBud
Follow
FLOWERING STARTS In the the new marshydro set-up 120x120x200 4'x'4 FC-4800 lamp Pubes are showing on all of them happy days in the absolutely amazing marshydro tent 👌🏻💯👌🏻 and no balls in the room yet so that's good at least i know that first grow i had issues with hight but with my 120x120x200 that not going to be end problem so stretch like ya never stretch before 💪🏻 i am prepared now lol the FC-4800 is a beast and still tweaking hight dimmer don't want to burn them but also want to utilize the lamp as much as I can but will get under control 🤘🏻😎🤘🏻 1/11/21 Did some last defoliation and spread the plants out bit Tru the tent got lamp dialed in dimmer around 55% and hight around 45cm above the plants and every week will bump up the dimmer with 5% they are looking very good healthy and i am very proud of the results so far gave the proper nutrients and the normal watering in between everything cool in the hood Will be updated soon happy growings Growmies visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
4
Share
📹: Video on YouTube @hinterhofgrower please like & subscribe 🌱: 💧: 💡: Dli 40 mol/m²/day 🤔:
Likes
10
Share
Half way through the week of germination the seedling started to grow horizontally, removed humidity tent, turned off the heating pad, and built up the soil around her base. Plant seems to be doing fine now. Join my discord here: https://discord.gg/bhBQRmSzJ3 Feeding 8/16/21 Had to PH via drop tester as digital meter broke. PPM742 69F
Likes
12
Share
Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 21/12/2019 - Fed her 1.5l of 6.4PH water with 0,5ml of each: Grow, Bloom and Max, and 1ml of each: Heaven, Alga-mic and Vera, noticed almost no run off, I use about 1/3 of the nutrient dosage on the chart, to achieve about 200/300PPM (500 scale). Did some light pruning also.
Likes
2
Share
@EtnoGrow
Follow
here already a little more grown and applying the techniques lst apical pizzicato experimenting, Seeing how the techniques are manifested, some were done poorly, so their results were somewhat strange or curious, if they did, you judge, errors such as not cutting the apical trying to do the pruning, poe error from fmi and only cut the tiny growing leaves that's why you will see those rare leaves
Likes
2
Share
I used a heating pad on a thermostat set to 82° Fahrenheit. It only took about three days for the seeds to pop. Note the germination kit in the back left of the tent
Likes
8
Share
Bin echt sehr zufrieden und erstaunt, wie gut sich die Mädels gemacht haben. Und erstaunlich, wie die nach 22 Tagen schon riechen… bin echt gespannt, wie lange es noch bis zur Blüte dauert
Likes
1
Share
2/18: 4 weeks since we planted them. Some of the new nodes since topping are starting to come in. Also finally got to doing some lst. First time, so I didn't rlly know what I was doing all that much, but my main goal was to pull branches outward and have more light reaching all the nodes. I should definitely have topped and done LST earlier, but oh well, now I know for next time. I also removed some of the new fan leaves that were covering the new nodes. My roommate wanted to experiment with the smallest one so removed some of its big fan leaves. I don't really think that was the right call, but whatever we'll see what happens. Would also have loved to try mainlining but its also pretty late for that. It would have slowed down veg quite a bit too, and since we have to go home from college in early may, they have to be harvested by then. Gonna water later this afternoon as well.
Likes
4
Share
My Strawberry Gorilla Automatic from Fast Buds is now in its third week of flowering, and I couldn’t be happier with how she’s progressing. She looks incredibly healthy, with vibrant green leaves and strong branches. The stretch phase is nearly over, and she has developed a solid structure with a well-defined main cola.🌱 One of the most exciting changes this week is the first appearance of trichomes on the main bud. Under the light, they’re starting to sparkle, hinting at the resin production that’s about to take off. The buds are forming nicely, and I can already smell a faint but promising aroma developing. So far, she’s responding well to the nutrients and environment, with no signs of deficiencies or stress. If she keeps going at this pace, she’s going to be a real beast by harvest time.😊
Likes
16
Share
Defoliated and flipped to 12/12 Slight stretch. Plants didn’t like that I only gave them half veg nutes and half bloom. They look nitrogen deficient. They’ve also shown some calcium deficiency i believe. The uprising foundation is cal mag and sulfur mostly I believe. So it’s good to have
Likes
23
Share
Básicamente lo mismo, aunque está semana pilló bastante más horas de luz(tuve que irme fuera de casa dos findes seguidos, en los cuales la dejé con la luz encendida full 24/7 en la caja) Como experiencia utilicé café reposado 48h para "alimentarla" e intentar bajar el Ph de la tierra (coco ph6+hummus ph7+vermiculita ph8= ph total 7) El otro experimento fue cubrir la tierra con coco para que el tallo eche raíces y aprovechar su espigamento! Las horas de luz solía dejarla 8h en bombilla mientras duermo, y el día la pongo en la ventana a que tome el fresco, pero apenas tiene luz directa, me da la sensación que crece más rapido cuando vuelvo del finde, estoy replanteandome tenerla más tiempo en la caja con luz, porque la veo aún pequeña, y quizá ponerle un ventilador de pc o algo🤔..veremos, aún tengo el papel de aluminio al lado de la caja y ni se lo he puesto, con eso os lo digo todo☝️🎃
Likes
67
Share
We are almost there! Second ripening week and after this i will get with AN final flash. I'm giving half the power to the lights for an hour in the morning and one in the evening, a kind of sunrise and sunset, removed the heater from the tank so as to simulate the arrival of the autumn cold, the tops have a purple color. everything seems to flow thanks for your visit here buddies wish you the best 💚🌱🤜🏼🤛🏼 Finally i've taked some smartphone camera pics only smartphone flashlight and grow lights off. I feel it will be around 300g harvested, what do you think about it? 🤔🤓
Likes
2
Share
@RatmanJR
Follow
July 12th. 49 days post flip. Whatever my plant has been experiencing seems to be getting worse. I can’t see it having a deficiency with everything I’ve been giving it so I’ve just been giving it water. I suspect it’s lockout, or it could even potentially be light burn. At this point I have about two weeks left so going to continue giving it water. I also dialed the lights back from 80% down to 60% to see if it helps at all because the leaves on this thing have been susceptible to light burn from the very start. I will say I think it was a little underwatered this week as when I went to give it tea the leaves were a little turbid. So I might be dealing with a multifaceted issue Regardless the buds themselves continue to fatten, not as large as I would have hoped but we have so many tops I’m not concerned. Still have two more weeks to go for this thing to pack on some weight I will be getting my soil tested at a local university and posting the results here soon. I just ordered the kit. Aside from all this the plants smells amazing and trichome density looks good. I’m super excited for this crop. God bless!
Likes
16
Share
@Mopish
Follow
Correct Math - 185w * 56 days of veg (18h) - 390w * 70 days of flower (12h) - 66g dry material - Total space around 37.5% of the tent Veg cycle: 185w / 1000 = 0.185 kW/h 0.185 kWh x 18 hours per day = 3.33 kW per day 3.3 kW per day x 56 day veg cycle = 186.48 kW per veg cycle for the whole tent 186.48 * 0.375 = 69.93kW for the area covered by the plant Flower cycle: 390w / 1000 = 0.39 kW/h 0.39 kWh x 12 hours per day = 4.68 kW per day 4.68 kW per day x 70 day flower cycle = 327.6 kW per flower cycle for the whole tent 327.6 * 0.25 = 122.85kW for the area covered by the plant Total: 69.93 kW (veg) + 122.85 kW (flower) = 192.78 kW per entire cycle for the area covered by the plant 66 grams dried / 192.78 kWh = 0.34 grams per kW --- Total Harvest Total Harvest = 11g Choco + 66g KDA + 46g BC = 123g Total kW = 186.48 + 327.6 = 514.08 123g / 514.08 = 0.23 grams per kw
Likes
16
Share
Aug 17: Auto Overdose is a nice plant but it’s not an auto. I started this one late and only topped it once thinking it was an auto. Other growers have noticed it isn’t an auto too, so I forced it in the dark garage. Flowering has to be started by the end of July here or it won’t finish in the fall. The flowers are forming quickly and I suspect this is actually Overdose Fast. So far so good, and good genetics for a Fast plant. Aug 18: no UV light today unfortunately but it was decently sunny. Scrog net certainly seems like a good idea. This plant is asymmetrical because I broke one of the two main stems a couple weeks after topping. This changed the shape of the plant so it’s become one-sided as if I was growing it up against a wall. Lots of nice lower branches came up so she looks pretty good now.