Likes
9
Share
@Deeng
Follow
Lst is a little hard in this plant, because it has very shor internodes, but lets see how it will evolve The plant is beginning to show some preflowers
Processing
Likes
8
Share
Likes
3
Share
@Sators
Follow
Day 29 – Holding Strong Indoors While Awaiting the Sun After two bright and sunny weeks, the UK weather has taken a turn—temperatures have dropped and grey skies have taken over. For the second day in a row, the plant has remained indoors on the windowsill, patiently waiting for the return of warm, sunny conditions. Despite the limited direct sunlight, the plant is showing steady vertical growth and structural development. The inter-nodal shoots are beginning to stretch confidently, and the canopy is broadening out with healthy fan leaves. It’s clear that the root zone is well-established, as no wilting signs appear and the medium remains nicely moist—no need to water for now. While it may seem like a temporary pause in outdoor activity, this rest indoors is helping the plant conserve energy and avoid potential stress from fluctuating cold and wet conditions. Once the weather stabilises again, it’ll be back to soaking up real sunshine. Observations: Location: Indoors (windowsill) due to cool outdoor temps Temperature: Noticeably lower; unsuitable for outdoor stay Soil: Moist, no watering needed Growth: Internodes extending, foliage thickening Patience remains key, and this CBD Auto 20:1 continues to impress with its resilience. Day 32 – Stretching Skyward with the Sun After a few overcast days indoors, the sun is back—and so is our CBD Auto 20:1, basking once again in full-spectrum natural light! The shift outdoors today was met with bright, clear skies and a lovely warm breeze. The plant is thriving in these ideal spring conditions, showing confident vertical growth and a strong central stem that’s gaining both height and girth. The leaf spread is wide and lush, with healthy serrated edges catching the sun from every angle. What stands out now are the multiple lower branches developing evenly—clear signs that this plant is preparing for the flowering transition in the near future. It’s rewarding to witness how much energy the plant can absorb on days like this. The outdoor environment clearly encourages a more upright and assertive growth posture compared to the last couple of indoor days under diffused windowsill light. Observations: Light: Full sun exposure, ~7 hours direct sunlight expected Development: Lower branches maturing, stem thickening, leaf canopy expanding Mood: Energised, reaching, vibrant We’re now well into the vegetative peak, and the structure is shaping up beautifully. Let’s hope this weather holds—it’s perfect for what comes next. Day 34 – First signs of flowering! We’ve entered a new chapter—today marks the visible appearance of pistils, signalling the official start of flowering! This beautiful CBD Auto 20:1 from 420FastBuds.com has been developing steadily, and it’s been an exciting journey transitioning it from indoor windowsill care to full outdoor exposure. Last night’s rain disrupted my plans to leave the plant outside overnight, but perhaps that was a blessing in disguise—timing and adaptation still matter. Today, however, the sun is back in full swing, delivering strong warmth and excellent light. The super soil is doing its job wonderfully, holding moisture and nutrients efficiently. The plant is clearly enjoying the rhythm of nature. Growth has stretched upwards significantly since the last few days, and side branches are expanding too. Unlike in a tent where watering might happen every 1–2 days, this outdoor grow has taught me the art of patience—watering is done only when the soil truly dries out, which depends on weather, sun, wind, and positioning. Huge thanks to 420 Fast Buds for this amazing strain—resilient, beautiful, and rich in promise. Can’t wait to see what the next days bring! Day 35 – Settling Under the Open Sky This CBD Auto 20:1 lady has now officially begun spending her nights outside under the open sky. So far, I haven’t felt the need to cover her, and she’s handling the shifting weather conditions with impressive resilience. Some nights are slightly cooler, but the days bring back that familiar warmth – and she clearly loves it. Her structure is becoming more defined, with side branches now fully visible and stretching confidently towards the light. Since she’s grown outdoors from the beginning, the natural rhythm of sun and wind has made her strong, well-adapted, and noticeably more robust than my previous indoor tent grows. It’s truly fascinating how dynamic and engaging outdoor growing can be. There’s a deeper connection to the process – monitoring the skies, respecting nature’s timing, and witnessing each subtle change. Plus, it’s certainly a more economical setup! The pistils are now popping with greater clarity, signalling the transition into flowering. It’s incredibly satisfying to watch her shift gears and get ready for her next stage of development. My super soil continues to do all the heavy lifting – no feeding schedule, just pH-balanced water when the topsoil is dry, which depends entirely on whether she’s basking outside or sitting in the shade indoors. Massive thanks to 420FastBuds for this incredibly vigorous and well-adapted strain. She’s growing with confidence, and I can’t wait to see how she flowers under these natural conditions. Let’s keep the rhythm going – one sunny day at a time!
Likes
3
Share
Clementine Slush #3: Another stalwart of the tent and candidate for topping this week! Clementine Slush #3 is growing well into week 4 and we gave her head a good ol' chop on day 27. She had a bit of discoloration on some lower fan leaves, but I chop that up to transplant stress and adjusting to the coco moisture. She better get ready... the transplant to 5 gallons is coming! Tent-wide update: This week was very relaxing in the tent, as we prepare for the major transplant into their final 5-gallon autopot home! I did a major water to runoff, which they absolutely loved! The recipe was, for 2 gallons of water: 2 Gallons RO Water 1 ml Ventana Plant Science Structure 4 ml Ventana Plant Science Grow 12 ml Ventana Plant Science Support ec .89 ph 5.7 Additionally, on day 25, I moved to 300 PPFD since the plants looked ready for an increase in light. The responded great, and the rest of week 4 has been devoted to topping plants when ready, and preparing for that big transplant. I also realized I've been a bit slack on my mixing order for Ventana Plant Science, which could be a reason for some of my cloudy reservoir issues when my autopots are on, so I will be very diligent about the proper and recommended order moving forward: Liquid Line Mixing Order Structure (first) FlaVUH Grow / Flower Expand Support (last) It's going well thus far, though I think this may be my longest grow yet!
Likes
18
Share
@Coughy
Follow
DAY 62 1 day early of start of new week, just waiting for some more ambers, nearly ready🎉 Still running RO only, 40 PPM. Still keeping it pH’d, it likes to drop slowly still. However, I don’t get why pH is important during flush tho. Not like I need to keep nutrients available for plant to suck up... 🤷‍♂️ I’ve been considering drilling some holes into the base of the main stem as to simulate the stalk-splitting technique. Maybe it’ll help speed things up... I’ll check trichs again tonight when lights kick on and make an executive decision and post updated pictures if it’s a go ahead. Day 63 I split me some stalks! Uploaded a video of the procedure. Day 64 This phenotype is developing purple leaves? Photos uploaded. Day 65 Harvesting... Day 66 More Harvesting... Day 67 Taking clones, moving veg plants to bloom tent. This grow is drying.
Likes
82
Share
@DevilsBud
Follow
New week for the Fast bud 420 The CBD crack the cheese and purple lemonade are a couple days further into the stretch and getting tall. The rest definitely have some stretching to go. I come to realize tho and i already semi knew it that this is probably gone be the only autoflower run i will do The strains that have 35 of veg and 30 to 40 flowering are perfect as auto flower quick turnaround On the other hand tho auto flower that take 65 to 70 of Flowering are not in my opinion this is as long as normal photoperiod plant and that gets way bigger more yield etc . I don't see the point of growing a autoflower with 60 days of flowering Then just get a photoperiod Strain and let it Flower week 4 ore when ever you want Control control control 6/11/22 Did some light defoliation 2 to 4 leafs per plant 9/11/22 So far it all goes without any issues I my self is Struggling a lil bit with what ore when to feed some nutrients because of shorter flowering time by some don't want to over feed them to much so flushing don't take for ever 10/11/22 Stretch update cheese strain is not stopping as you see here in back middle she now around 110cm More updates Tru the week Happy growings growmies
Likes
2
Share
Day 22 - No keeping this beast down! Any kind of LST thrown at her has nothing but amazing results! Time to start leaf tucking! Day 23 - Doing what I can to get those lowers as much light as they can! I saw a pistol or two. Can't wait to see her ignite into flower! Day 24 - She's filling out and that cover crop is just insane!! I have not been able to get any of my water soluble nutrients in because of the run off. Tomorrow will be the day as its been a few days since I've needed the shop vac. Day 25 - Early morning feeding. I take my pictures consistently in the evening around 8-10pm. Insane 24 hour difference! Hard to keep the leaves under control. Day 26 - Installed a trellis net for a few reasons. I like to have a baseline for later lollipopping, it'll help support later buds, and its opening lower sites up for light, giving them their final chance to not get the later cut. Day 27 - Final tuck with some pulley assistance in areas before I head out of town for a day in the morning. Moving the cover crop to not allow shadow casting. I could always chop it and give it to the soil, but im enjoying the sight. Day 28 - Had to go out of town for the night, so no picture for today. I'm sure shes happy and raging.
Likes
15
Share
2/17/2024 - Vegetation Week 1 Day 1- I removed some of the water to see where the roots were only one had roots in the water. However I want to go ahead and get them on Week one Nutes So I am over 50 gallons of water in the system so I mixed the Trio at a 1.0mil per Gallon but restricted it to a top of 50 gallons period. I top fed the other two to keep encouraging root growth. I also finished my drying and curing from my last run and wanted to show what it looks like all bagged up and in the cannatrol. I added the following Nutes: Silica = .5Mil/Gal= 25Mil CalMag= .75Mil/Gal= 37.5Mil FloraMicro = 1Mil/Gal= 50Mil FloraGro= 1Mil/Gal= 50Mil FLoraBloom= 1Mil/Gal= 50Mil ORCA = .5Mil/Gal= 25Mil EPSOM- 1 big pinch 2/18/2024 - Vegetation Week 1 Day 2- I top fed #1 and #3 since they still don't have roots in the water, I will continue one top feed a day until roots hit water. 2/19/2024 - Vegetation Week 1 Day 3- #3 now has root in the water.. Yay!! I now have #2 and #3 with roots in the water so no top feed for them. I only had to top feed #1 and the only reason I didn't just go ahead and cull her today was I am responsible for breaking her tap root and stunting her, I wasn't careful enough and she was the first to show a good root. In that vain I will carry her a few more day's top feeding but if not root by the end of the week she is getting culled. 2/20/2024 - Vegetation Week 1 Day 4- Today I Ensured the PH is in range, I refilled the Humidifiers, I top fed #1 since the roots are still not in the water. I also removed the humidity shields from #2 and #3 today the ladies were touching the sides so they are done with the extra shields.. 2/21/2024 - Vegetation Week 1 Day 5- Today Morning: I Ensured the PH is in range, I refilled the Humidifiers, I top fed #1 since the roots are still not in the water, Evening: I decided that the roots of the two are looking great so I am going to drain and bump the Nutes to a full Week 1/ Week 2 Nute base. I added 36 Gallons I added the following Nutes: Silica = .5Mil/Gal= 18Mil CalMag= .75Mil/Gal= 27Mil FloraMicro = 3Mil/Gal= 108Mil FloraGro= 2Mil/Gal= 72Mil FLoraBloom= 2Mil/Gal= 72Mil ORCA = .5Mil/Gal= 18Mil 2/22/2024 - Vegetation Week 1 Day 6- Today I Ensured the PH was not too high as the system continues to cycle the water and adjust, I refilled the Humidifiers, I top fed #1 since the roots are still not in the water, 2/23/2024 - Vegetation Week 1 Day 7- Still have to Top Feed #1 no roots in the water, however she is still progressing nicely slower than her sisters with roots in the water but still going strong.
Likes
7
Share
@Mimi420
Follow
🌱 Flip Day | End of Veg - Day 59 From Lights ON The switch has finally been flipped. After 54 days from seed, the ladies are officially entering flower mode and the 400W HPS has taken over for the stretch phase. Time to let them run. This last week was all about canopy management. I went pretty heavy on the defoliation, removing a lot of large fan leaves that were blocking tops and restricting airflow through the jungle. I also did some additional supercropping and continued working the screen to keep everything as even as possible before the flip. The SCROG is sitting around 90% full and the canopy is looking nice and level. Exactly what I was aiming for before moving to 12/12. From here on I'll keep tucking and spreading tops during the first couple weeks of stretch to fill the remaining gaps. The girl on the left (Caramba) has turned into a dense, bushy beast with tight internodes and a very compact structure. The two Nebulas on the right have a bit more vigor and are already showing signs they'll be the stretchier ladies of the tent. Looking forward to seeing how they stack up under HPS. Feeding remains simple and consistent. The plants are getting around 3L each every 3 days and are responding great. Leaves are healthy, color is on point and overall vigor is strong across the board. One thing I'm really happy with is how the canopy came together after all the LST, supercropping and screen work. The plants recovered fast from every training session and are now entering flower with a solid foundation. Airflow is much better after the cleanup and light penetration has improved significantly. Now the real fun begins. The screen is loaded, the HPS is blazing and stretch season is officially underway. Let's see what these girls can do. 🔥🌿
Likes
4
Share
@Fatbudz
Follow
in a quick way, it was possible to update my latest growths. now that everything is up to date, I'm going to talk about honeycream. 🐝🍯 look how that little one is getting ... Did some defoliation in week before. second week of bloom is completely frosty ❄️ I'll try to register everything but I don't promise anything ehehehee . see you soon 😃😴
Likes
6
Share
Noch 1 bis 2 wochen blüte noch, sie hat bis jetzt wunderbare Blüten entwickelt. Der Geruch is einzigartig ❤️
Likes
20
Share
Night fucking queen :) what a damn beautiful plant. Almost at the finish line only getting fed plain water ph to 6.0. Hella important to do so so plants can properly leach out nutrients. She was easy to grow. Was fun to grow. Cant wait to grow this one again maybe next round I'll get the more green pheno. Well see. Either way I am one happy grower as always. ^_^ You can see the bud sites are really starting to fill everyday now. Such a huge difference from last night to today. Really impressed even the lowers are getting chunky :*
Likes
27
Share
Likes
16
Share
@Spitt4121
Follow
All plants are growing well. Started LST on them, am using some string and hard wire for now but have some soft plant ties coming tomorrow. Its my first time doing LST, am I doing it right? Reference in video
Likes
59
Share
Coucou les gens 👍 Comment vous allez ? Moi je suis tellement content, regardé le résultat de l'évolution de mes Gorilla Cookies Auto Elle sont juste magnifique, mais magnifiques poua je vous raconte pas mon kiff a chaque fois que j'ouvre la box 😱 a chaque fois c'est le choque l'odeur et ultra forte mais surtout cette génétique de chez #fastbuds sont super super !!! Je vous conseille fortement d'essayer ces graines 🙏🙏 Que pensez vous de ces demoiselles ❤️
Processing
Likes
2
Share
I think flowering is initiated..worst case I will have 9th week of flowering
Likes
34
Share
The plant is ready to flower. I covered the soil with inputs and did a little defoliation. It is developing well.
Likes
26
Share
25.08.23-проведена масштабная дефолеация (примерно 40% листьев ) Продолжаю делать лст . Из проблем пш Корневой зоны 4 … вход 6.2 выход стабильно 4 пш и ниже ( Было принято решение промыть растение под проточной водой 40 литров и это не исправило ситуацию . Засола нет так как сток после промывки стал 20 ппм, после этого обильно пролил раствором слабой концентрации в 650 ппм! Незнаю как исправить ситуацию с кислым дренажом 26.08.23-горшок очень тяжелый и совсем не просох .. в этот день никаких манипуляций не проводилось Пш корневой зоны стабильно низкий 4-4.5 . Все равно растение выглядит счастливым хоть и немного отстань в росте на мой взгляд . Решил дать ей еще 2 недели вегетации затем 12/12
Likes
9
Share
I'll be using the 5x5 for my photoperiods Everything is starting to pop out of the soil now. Waiting on 2 more to pop out and that will be all of them🤞👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 CHECK OUT MY OTHER DIARIES TO SEE WHAT BREEDERS AND STRAINS I AM GROWING👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
14
Share
Another week down, and here’s where things stand: BioBizz#1 This plant is now showing the first signs of nitrogen deficiency on its lowest leaves, even though I’m already feeding 120% of the Grow nutrient according to the schedule. It’s something I’ll keep monitoring closely. AN#4 Still no visible deficiencies here! This one is thriving, and I’ve included a comparison photo in the gallery to showcase its progress. AN#3 This plant continues to improve steadily, and due to space constraints, I’ve decided to send it into flowering as well. Let’s see how it performs moving forward! 😅